Solved REDMI NOTE 4(MIDO) ONLY EMMC REPLACE DONE WITH EASY JTAG PLUS WITH FULL GUIDE AND FILE LINKS.

vishal3008N · May 17, 2021

IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

Please login to view image

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

Please login to view image

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

Please login to view image

NOW REBALL EMMC AND CLEAN MB.

Please login to view image

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

Please login to view image

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

Please login to view image

aftab_ansari5287 · May 17, 2021

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

Wonderful work bro

vinod69420 · May 17, 2021

Great job bro today i got success in note 4 emmc change with your files thanks again.

bhuvanele · May 18, 2021

Very very helpfull post.

Keshavkm · May 21, 2021

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

exilent bro

vishal3008N · May 21, 2021

Keshavkm said:
exilent bro

Thanks airtel sir

bisdak · May 22, 2021

wow this is the best post i read so far..
step by step and all you need is there..

i mean its a complete recipes!!!

Rathiji · Jul 22, 2021

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

This file work on 32 gb emcp ??

vishal3008N · Jul 22, 2021

Rathiji said:
This file work on 32 gb emcp ??

Yes its working on all emmc.

zubairkhan61 · Sep 16, 2021

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

vishal3008N said:

IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

Click to expand...

Same modle se emmc le sakte h

hanif.sagir · Feb 24, 2022

hi

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

hi bro i did your same method but no service *#*#4636#*#* CHK radio off wipe efs full with umt radio ON but baseband gone then again repair imei and write qcn again radio off please help bro

omprakash30 · Nov 5, 2023

vishal3008N said:
IDENTIFY LOG ON UMT IN 9008 PORT.

Operation : Read Information
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM5)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1600400 [8953] 00000000
OPK_DATA : 079E496E26A477B120DFCD85DF7E4AD067164D8292DDD379930D5891E3D8240B
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8953]...Done
Executing Loader...OK
Detecting Chip Type...OK
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Using Alternate Method...
DebugData : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Error getting Payload Information!
Error Log : UXVhbGNvbW0gSFMtVVNCIFFETG9hZGVyIDkwMDggKENPTTUp
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 6.7

EMMC REMOVE

View attachment 31223

CHECK EASY JTAG PLUS BOX FOUND EMMC EMMC DEAD

View attachment 31217

TAKE EMMC FROM NOTE 5 VINCE (KMRH60014A-B614)

View attachment 31218

NOW WE NEED TO CLEAN RPMB WITH EASY JTAG PLUS BY WRITE FFU FILE.
Here is ffu file link. eMMC_Firmware_KMRH60014A-B614 By Vishal.bin

View attachment 31219

AFTER RPMB CLEAN OPEN EFM AND WRITE THIS ROM IN EMMC WITH EFM
https://bigota.d.miui.com/V11.0.2.0...CFCNXM_20191107.0000.00_7.0_cn_07679911aa.tgz

View attachment 31220

NOW REBALL EMMC AND CLEAN MB.

View attachment 31227

AFTER PUT EMMC IN MOBILE WAIT FOR 5 MIN MOBILE WILL BE ON .
JUST SKIP SETUP AND ENABLE DIAG PORT WITH THIS CODE (*#*#717717#*#*) AND REPAIR SEC AND WRITE QCN WITH ANY TOOL
Mido[MPSS.TA.2.2.c1-00288-8953_GEN_PACK-1.87223.1.88508.1].qcn QCN LINK

NOW FLASH WITH GLOBAL ROM WITH ANY TOOL.
https://bigota.d.miui.com/V11.0.2.0...XM_20191107.0000.00_7.0_global_91ed4d2a3f.tgz

View attachment 31222

AFTER FLASH DONE WAIT FOR 5 min Job will b done LIKE THIS.

View attachment 31226

View attachment 31225

Thanks sri

Search

Search

Solved REDMI NOTE 4(MIDO) ONLY EMMC REPLACE DONE WITH EASY JTAG PLUS WITH FULL GUIDE AND FILE LINKS.

vishal3008N

aftab_ansari5287

vinod69420

Active Member

bhuvanele

Member

Keshavkm

Junior Member

vishal3008N

bisdak

Friend's Martview

Rathiji

Member

vishal3008N

zubairkhan61

Junior Member

hanif.sagir

Junior Member

omprakash30

Member