World First Repair and patch cert J260F u7 done

[Kstllo2000]

repiar imei

Chimera Mobile Phone Utility version: 26.33.1031 @ 2020-10-17
Repair started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260F
Sales Code: XSG
Country Code: UAE
Timezone: Asia/Tehran
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Sat Jun 27 16:26:54 KST 2020
PDA Version: J260FXXU7ATF3 [june 2020, rev3]
Phone Version: J260FXXU7ATF1 [june 2020, rev1]
CSC Version: J260FOJM7ATG1 [july 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: RZ8KC0WN61A
Imei: 35181
Imei2: 3518
Battery Status: 3.74V (11%)
Network Type: GSM
SIM Status: READY,ABSENT
Multisim Config: DSDS
Warranty Bit: 0
Security Patch: 2020-07-01
Repair imei...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Appropriate serial port is not available.
1. On the dial window, enter *#0808# 2. Select DM+ACM+ADB or DM+MODEM+ADB 3. Click the Ok on phone display 4. Wait a few seconds until the diag port is initialized 5. Click Ok button
Trying to enable diagnostic mode. Be patient! Do NOT disconnect the phone!
Waiting for ADB connection. Be patient! Do NOT disconnect the phone!
Succeeded.
Trying on port SAMSUNG Mobile USB Serial Port (COM184)
Diag mode available on port SAMSUNG Mobile USB Serial Port (COM184)
Processing. Be patient! Do NOT disconnect the phone!
Current imei: 351
Repaired imei: 8628
Current imei2: 3518
Repaired imei2: 8628
Successfully finished.
Finished at local time: [10.17.20 16:09:05]
WorkID: 111595786


patch cert

Chimera Mobile Phone Utility version: 26.33.1031 @ 2020-10-17
Printing phone history

Repair IMEI
2020-mm-17
12:35
PM

Patch certificate started
Gathering phone info...
Collecting information. Be patient! Do NOT disconnect the phone!
Model: SM-J260F
Sales Code: XSG
Country Code: UAE
Timezone: Asia/Tehran
Android Version: 8.1.0 [M1AJB] [SDK 27]
Build Date: Sat Jun 27 16:26:54 KST 2020
PDA Version: J260FXXU7ATF3 [june 2020, rev3]
Phone Version: J260FXXU7ATF1 [june 2020, rev1]
CSC Version: J260FOJM7ATG1 [july 2020, rev1]
Board Platform: EXYNOS5
Modem Platform: SHANNON305
Serial Number: RZ8KC0WN61A
Imei: 8628
Imei2: 86
Battery Status: 3.97V (62%)
Network Type: GSM
SIM Status: ABSENT,ABSENT
Multisim Config: DSDS
Warranty Bit: 1
Security Patch: 2020-07-01
Preparing...
Checking root access.
The phone is rooted by: magisk20.4
Reading data...
The operation is in progress. Be patient! Do NOT disconnect the phone!
Patching certificate...
Checking root access.
About 30-180 seconds after the phone starts, the signal strength indicator turns OFF and then turns ON again after a few seconds.
You can check the status of the imei using: *#0011#
The patchcert can be removed by repeating the process.
After installing new firmware, the patchcert process must be repeated.
Successfully finished.
Finished at local time: [10.17.20 18:51:53]
WorkID: 111625135

 

[looupss]

root ?

 

[mubashar nazir126]

Welcome to Octoplus Box Samsung software version 3.0.3.0
Card S/N : 1000081FD
-----------------------------------------------------------------------------------
To connect SM-G935S phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Work ID: 00000000010D31B9
Platform: Samsung Android
Selected port: COM56
Selected model: SM-J260F
Operation: Read info
Reading info, please wait...
Proper android device not found. Make sure that "USB debug" option on
the device is turned on.
Performed by 3.0.3.0 Software version.
-----------------------------------------------------------------------------------
Work ID: 00000000010D31F7
Platform: Samsung Android
Selected port: COM56
Selected model: SM-J260F
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J730F
Firmware compiled date: Mon Oct 12 20:33:55 KST 2020
PDA version: J730FXWU7CTJ1
CSC version: J730FOJV7CTI3
SW version: J730FXXU7CTI3
Build number: QB16986508
Phone SN: R28JC2TZN6P
Android version: 9 (PPR1.180610.011)
Sales code: EGY
Country: Egypt
HW platform: exynos5
HW Chip: unknown
HW Modem: SHANNON315
Security patch level: 2020-10-01
Warranty Void: 0
SIM 1 status: loaded
SIM 2 status: loaded
Codename: j7y17ltexx
Performed by 3.0.3.0 Software version.
-----------------------------------------------------------------------------------
Work ID: 00000000010D3225
Platform: Samsung Android
Selected port: COM56
Selected model: SM-J730F
Operation: Read info
Reading info, please wait...
Please, press "OK" button on the phone to allow USB debugging.
Detected phone model: SM-J260F
Firmware compiled date: Wed Jul 8 16:47:53 KST 2020
PDA version: J260FXXU7ATG2
CSC version: J260FOXM7ATF3
SW version: J260FXXU7ATG2
Build number: QB16295856
Phone SN: R28M30KF29W
Android version: 8.1.0 (M1AJB)
Sales code: SEK
Country: Ukraine
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2020-07-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: absent
Codename: j2coreltecis
Performed by 3.0.3.0 Software version.
-----------------------------------------------------------------------------------
Work ID: 00000000010D3298
Platform: Samsung Android
Selected port: COM56
Selected model: SM-J260F
Operation: Repair IMEI A
Detected phone model: SM-J260F
Firmware compiled date: Wed Jul 8 16:47:53 KST 2020
PDA version: J260FXXU7ATG2
CSC version: J260FOXM7ATF3
SW version: J260FXXU7ATG2
Build number: QB16295856
Phone SN: R28M30KF29W
Android version: 8.1.0 (M1AJB)
Sales code: SEK
Country: Ukraine
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2020-07-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: absent
Codename: j2coreltecis
Checking root...OK
Checking device status...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...OK
Checking root...OK
Connecting to server...OK
Checking smart card...OK
Username: Amjad5570
Authorizing...OK
Checking balance...OK
Your balance: 100 credits.
Checking operation...OK
Initializing exploit...OK
Checking operation...OK
Bypassing security 1...OK
Bypassing security 2...OK
Reseting MSL...OK
Repairing IMEI...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
IMEI successfully repaired.
Performed by 3.0.3.0 Software version.
-----------------------------------------------------------------------------------
Work ID: 00000000010D341F
Platform: Samsung Android
Selected port: COM56
Selected model: SM-J260F
Operation: Repair IMEI B
Detected phone model: SM-J260F
Firmware compiled date: Wed Jul 8 16:47:53 KST 2020
PDA version: J260FXXU7ATG2
CSC version: J260FOXM7ATF3
SW version: J260FXXU7ATG2
Build number: QB16295856
Phone SN: R28M30KF29W
Android version: 8.1.0 (M1AJB)
Sales code: SEK
Country: Ukraine
HW platform: exynos5
HW Chip: exynos7570
HW Modem: SHANNON305
Security patch level: 2020-07-01
Warranty Void: 1
SIM 1 status: absent
SIM 2 status: absent
Codename: j2coreltecis
Checking root...OK
Checking device status...OK
Phone will restart now. Please don't disconnect cable!
Rebooting phone...OK
Searching for ADB device...