Legitunlocks.com
Martview Magic Scrub LCD Glue Remover - 100% Safe For LCD

Free Gift From Martview Forum Request clone firmwares here

A

ali gsm

Active Member
Jun 15, 2017
39
10
adnan mobile quetta
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 15010038574D423352011A98BCA27187
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
[eMMC] : FLASH_CID : 15010038574D423352011A98BCA27187
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x579798038D6A0FB7E257141524F4EDA9
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : SJT
ProdName : Q802
ProdModel : T•two
Device : SJT
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1

SECURITY :
IMEI_SW [1] : 365313600004531
IMEI_SW [2] : 365313600004549
BTMAC Addr : FE6A46658215
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P3_1_wg_n

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

NEED THIS FILE URGENT
 
=-rebel-=

=-rebel-=

Moderator
Jan 22, 2020
1,185
958
Philippines
ali gsm said:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 15010038574D423352011A98BCA27187
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
[eMMC] : FLASH_CID : 15010038574D423352011A98BCA27187
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x579798038D6A0FB7E257141524F4EDA9
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : SJT
ProdName : Q802
ProdModel : T•two
Device : SJT
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1

SECURITY :
IMEI_SW [1] : 365313600004531
IMEI_SW [2] : 365313600004549
BTMAC Addr : FE6A46658215
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P3_1_wg_n

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

NEED THIS FILE URGENT
Click to expand...
do a back up... then download this ONE and flash using spflashtool... SYSTEM ONLY
 
=-rebel-=

=-rebel-=

Moderator
Jan 22, 2020
1,185
958
Philippines
ali gsm said:
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 5 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6582
BB_CPU_NME : [MediaTek] MT6582_S00
BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x87
NAND Flash : NOT INSTALLED
eMMC Flash : 15010038574D423352011A98BCA27187
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , R3BMW
[eMMC] : FLASH_CID : 15010038574D423352011A98BCA27187
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
[eMMC] : FLASH_UCP : 7456 MiB [eMMC 8 GiB]
DEV RID : 0x579798038D6A0FB7E257141524F4EDA9
INT RAM : 0x00020000
EXT RAM : 0x40000000 [1 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : SJT
ProdName : Q802
ProdModel : T•two
Device : SJT
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : ALPS.JB5.TABLET.MP.V1

SECURITY :
IMEI_SW [1] : 365313600004531
IMEI_SW [2] : 365313600004549
BTMAC Addr : FE6A46658215
WiFi MAC : 000000000000

MODEM :
BaseBand : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P3_1_wg_n

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!

NEED THIS FILE URGENT
Click to expand...
do you have updates on your unit?
 
P

pradyumna

Active Member
Mar 18, 2019
40
6
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM88)
MODE [0]: PRELOADER PORT; PORT: 88
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6582 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x6582
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Switch to v1844
Found MT6582
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 510001154153583809DC0642634251FC
DA v4.2.135
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC CID: 15010051385853414206DC09FC514263
Ven: Samsung OEM: 256 ID: 513858534142 [Q8XSAB] PRV: 0x06
SNN: 3691641937 [0xDC09FC51]
MM/YY: 4/2015
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x3A3E00000 [ 14.56 Gb ]

RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x40000000 [ 1.00 Gb ]

CHIP: MT6582 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x6582
TYPE: LEGACY [MTK]
RNID: 412FA6F655252468940844B3E6575962

DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done LEGACY [MTK]

Analyze PMT... Ok
PMT: LPMT [0x5A] Records: 19
Select info source... Ok
Patch Level: LRX21M
Display ID: LRX21M test-keys
SW Version: 1683283126
Ver. CodeName: REL
Ver. Release: 5.0
Build Time: 05-05-2023 10:39:59
Product Model: 14 Pro Max
Product Brand: alps
Product Name: 14ProMax
Product Device: 14ProMax
CPU: armeabi-v7a,armeabi
Product Manfct: alps
Board Platform: mt6582
Product Info: 14ProMax
SW: full_hct6582_wt_l-user 5.0 LRX21M 1683283126 test-keys

Strategy: [none|generic]
Firmware ID: MT6582_alps_14_Pro_Max_OSv5.0_LRX21M_14ProMax
Verify firmware [MT6582_alps_14_Pro_Max_OSv5.0_LRX21M_14ProMax]...
Exist

Analyze userdata...
userData: encryptable

Analyze modem... Nothing
Analyze nvram...
NVRAM: Items: 0x74 Size: 0x028AFC State: Ok
WiFi MAC: 000000000000
BlTh MAC: 000046658201
IMEI[1]: 355838326081985
IMEI[2]: 355838326081993
Verify device config...
Ok
Loaders Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962\
Items to check: 20
Read [4] NVRAM
Read [3] PRO_INFO
Read [0] PRELOADER
Done 3 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962.7z
Finished

Analyze preloader...
EMI: MT6582 preloader_hct6582_wt_l.bin with 5 memory type(s)
1. eMMC DDR3 ID: 90014A484147326505 Hynix HAG2e RAM: 1.00 Gb
2. eMMC DDR3 ID: 150100464531324D42 Samsung FE12MB RAM: 1.00 Gb
3. eMMC DDR3 ID: 150100463832324D42 Samsung F822MB RAM: 1.00 Gb
4. eMMC DDR3 ID: 150100513858534142 Samsung Q8XSAB RAM: 1.00 Gb
5. eMMC DDR3 ID: 150100513832534D42 Samsung Q82SMB RAM: 1.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_hct6582_wt_l.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_hct6582_wt_l.bin [5574b873]...
Exist
Done: 00:00:30
Reconnect Power/Cable now
 
P

pradyumna

Active Member
Mar 18, 2019
40
6
pradyumna said:
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [remember Vol+ | Vol-]
Waiting for device connection...

PTFN: MediaTek PreLoader USB VCOM_V1632 (Android) (COM88)
MODE [0]: PRELOADER PORT; PORT: 88
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6582 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x6582
TYPE: LEGACY [MTK]
BROM: Sec Level: 0x00000000 Mode: PLAIN
VER: 0xFF BL: 0x01 [PRELOADER PORT]
AGENT: AUTO: 0_base: base_v2216
[3365c4d2] C:\InfinityBox\CM2MT2\boot\0_base\base_v2216\MTK_AllInOne_DA.bin
Looking for suitable BootChain in DA...
Switch to v1844
Found MT6582
AGENT: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
DA: Sync...
DA: AGENT started
NAND: DEVICE NOT FOUND
EMMC: OK
CID: 510001154153583809DC0642634251FC
DA v4.2.135
DA: DRAM ready
Boot to 2nd DA... Ok
Load HW info...
EMMC CID: 15010051385853414206DC09FC514263
Ven: Samsung OEM: 256 ID: 513858534142 [Q8XSAB] PRV: 0x06
SNN: 3691641937 [0xDC09FC51]
MM/YY: 4/2015
BOOT1: 0x00400000 [ 4.00 Mb ]
BOOT2: 0x00400000 [ 4.00 Mb ]
RPMB: 0x00400000 [ 4.00 Mb ]
USER: 0x3A3E00000 [ 14.56 Gb ]

RAM: SRAM: 0x00020000 [ 128.00 Kb ]
RAM: DRAM: 0x40000000 [ 1.00 Gb ]

CHIP: MT6582 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0001 EVOL: 0x0000 HWC: 0x6582
TYPE: LEGACY [MTK]
RNID: 412FA6F655252468940844B3E6575962

DA: Status: BLANK FLASH; Boot Style: EMMC FLASH BOOT

USB: HIGH-SPEED
Boot done LEGACY [MTK]

Analyze PMT... Ok
PMT: LPMT [0x5A] Records: 19
Select info source... Ok
Patch Level: LRX21M
Display ID: LRX21M test-keys
SW Version: 1683283126
Ver. CodeName: REL
Ver. Release: 5.0
Build Time: 05-05-2023 10:39:59
Product Model: 14 Pro Max
Product Brand: alps
Product Name: 14ProMax
Product Device: 14ProMax
CPU: armeabi-v7a,armeabi
Product Manfct: alps
Board Platform: mt6582
Product Info: 14ProMax
SW: full_hct6582_wt_l-user 5.0 LRX21M 1683283126 test-keys

Strategy: [none|generic]
Firmware ID: MT6582_alps_14_Pro_Max_OSv5.0_LRX21M_14ProMax
Verify firmware [MT6582_alps_14_Pro_Max_OSv5.0_LRX21M_14ProMax]...
Exist

Analyze userdata...
userData: encryptable

Analyze modem... Nothing
Analyze nvram...
NVRAM: Items: 0x74 Size: 0x028AFC State: Ok
WiFi MAC: 000000000000
BlTh MAC: 000046658201
IMEI[1]: 355838326081985
IMEI[2]: 355838326081993
Verify device config...
Ok
Loaders Ok
Backup to C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962\
Items to check: 20
Read [4] NVRAM
Read [3] PRO_INFO
Read [0] PRELOADER
Done 3 files
Compress: C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962\
Cleanup...
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6582__412FA6F655252468940844B3E6575962.7z
Finished

Analyze preloader...
EMI: MT6582 preloader_hct6582_wt_l.bin with 5 memory type(s)
1. eMMC DDR3 ID: 90014A484147326505 Hynix HAG2e RAM: 1.00 Gb
2. eMMC DDR3 ID: 150100464531324D42 Samsung FE12MB RAM: 1.00 Gb
3. eMMC DDR3 ID: 150100463832324D42 Samsung F822MB RAM: 1.00 Gb
4. eMMC DDR3 ID: 150100513858534142 Samsung Q8XSAB RAM: 1.00 Gb
5. eMMC DDR3 ID: 150100513832534D42 Samsung Q82SMB RAM: 1.00 Gb
Preloader saved: C:\InfinityBox\CM2MT2\backup\preloader\preloader_hct6582_wt_l.bin
Verify C:\InfinityBox\CM2MT2\backup\preloader\preloader_hct6582_wt_l.bin [5574b873]...
Exist
Done: 00:00:30
Reconnect Power/Cable now
Click to expand...

14ProMax
share file link plz............
 
You must log in or register to reply here.
Top