Selected model: Samsung SM-A107F (Galaxy A10s)
Operation: Read PTT
Software version: 4.3
Work ID: 110549
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM6 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x89C016FD, 0x394B684E, 0xE1A5EF90, 0xDD9A638A
Get Chip ID... [MT6765]
Get SOC ID... [CC76858DD10AEE6D90E81AC7770A9072D0395CF201BA3654944ACA590695D2F4]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100515836334142009F69CC6277AF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QX63AB
EMMC_ID : 0x150100515836334142009F69CC6277AF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A107F
Product Name : S96116AA1
Product Device : a10s
Product Board : S96116RA1
Board Platform : MT6765
Build ID : RP1A.200720.012
Build Date : Thu Jul 21 13:37:49 KST 2022
Display ID : RP1A.200720.012.A107FXXU8CVG2
Security Patch : 2022-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : A107FXXU8CVG2
Read partitions info from phone... OK
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "efuse"... OK
Read partition "nvram"... OK
Read partition "efs"... OK
Read partition "sec_efs"... OK
Read partition "bota"... OK
Read partition "param"... OK
Read partition "up_param"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "persist"... OK
Read partition "persistent"... OK
Read partition "misc"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "md1img"... OK
Read partition "spmfw"... OK
Read partition "scp1"... OK
Read partition "sspm_1"... OK
Read partition "lk"... OK
Read partition "steady"... OK
Read partition "boot"... OK
Read partition "recovery"... OK
Read partition "dtbo"... OK
Read partition "tee1"... OK
Read partition "vendor"... OK
Read partition "product"... OK
Read partition "system"... OK
Read partition "vbmeta"... OK
Read partition "cache"... OK
Read partition "omr"... OK
Read partition "sgpt"... OK
Saved to HYPERLINK C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A107F%20(Galaxy%20A10s)/DUMP_PARTITIONS_(2023-1-13_12-27-57)/
Dumping Partitions done!
Operation: Read PTT
Software version: 4.3
Work ID: 110549
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM6 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM5 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
LibUSB installed
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x89C016FD, 0x394B684E, 0xE1A5EF90, 0xDD9A638A
Get Chip ID... [MT6765]
Get SOC ID... [CC76858DD10AEE6D90E81AC7770A9072D0395CF201BA3654944ACA590695D2F4]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100515836334142009F69CC6277AF
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: QX63AB
EMMC_ID : 0x150100515836334142009F69CC6277AF
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A107F
Product Name : S96116AA1
Product Device : a10s
Product Board : S96116RA1
Board Platform : MT6765
Build ID : RP1A.200720.012
Build Date : Thu Jul 21 13:37:49 KST 2022
Display ID : RP1A.200720.012.A107FXXU8CVG2
Security Patch : 2022-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : A107FXXU8CVG2
Read partitions info from phone... OK
Read partition "preloader"... OK
Read partition "pgpt"... OK
Read partition "boot_para"... OK
Read partition "para"... OK
Read partition "efuse"... OK
Read partition "nvram"... OK
Read partition "efs"... OK
Read partition "sec_efs"... OK
Read partition "bota"... OK
Read partition "param"... OK
Read partition "up_param"... OK
Read partition "expdb"... OK
Read partition "frp"... OK
Read partition "nvcfg"... OK
Read partition "nvdata"... OK
Read partition "metadata"... OK
Read partition "protect1"... OK
Read partition "protect2"... OK
Read partition "seccfg"... OK
Read partition "persist"... OK
Read partition "persistent"... OK
Read partition "misc"... OK
Read partition "sec1"... OK
Read partition "proinfo"... OK
Read partition "md1img"... OK
Read partition "spmfw"... OK
Read partition "scp1"... OK
Read partition "sspm_1"... OK
Read partition "lk"... OK
Read partition "steady"... OK
Read partition "boot"... OK
Read partition "recovery"... OK
Read partition "dtbo"... OK
Read partition "tee1"... OK
Read partition "vendor"... OK
Read partition "product"... OK
Read partition "system"... OK
Read partition "vbmeta"... OK
Read partition "cache"... OK
Read partition "omr"... OK
Read partition "sgpt"... OK
Saved to HYPERLINK C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A107F%20(Galaxy%20A10s)/DUMP_PARTITIONS_(2023-1-13_12-27-57)/
Dumping Partitions done!
