UNLOCK INSTRUCTIONS:
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server' or press 'Unlock SPR via Server NEW' button,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 44.11
Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQU9FUE1
CSC version: G960UOYN9FUE1
Phone version: G960USQU9FUE1
Product code: SM2G960UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: R58N42D2R9P
IMEI: 359943092513892
HW version: REV1.1
RF cal date: 2020.04.28
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM13
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM21 detected
Reading data from phone... OK
Calculating...
Exception: Access violation at address 00483EAF in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.44.11 [SM-G960U,Read Codes via Server]
Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking TMB using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock TMB via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Unlocking SPR using sever:
1. Insert not SPR card to the phone and power it on.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone'-'Software information'
to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock...' button, select 'Unlock SPR via Server' or press 'Unlock SPR via Server NEW' button,
write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server
Selected model: SM-G960U
Software version: 44.11
Checking Login and Password... OK
Balance: 5 crd.
You have 5 credit(s) left. This operation takes 5 credits. Continue? Yes
Waiting for device to become ready... OK
Reading phone info...
Model: SM-G960U
Android version: 10
PDA version: G960USQU9FUE1
CSC version: G960UOYN9FUE1
Phone version: G960USQU9FUE1
Product code: SM2G960UZKAATT
CSC country code: USA
CSC sales code: ATT
Carrier ID: ATT
Phone SN: R58N42D2R9P
IMEI: 359943092513892
HW version: REV1.1
RF cal date: 2020.04.28
Chip name: SDM845
Modem board: SDM845
Security patch: 2021-05-01
Boot Warranty bit: 0
SIM State: ABSENT
Searching Samsung diag port... detected COM13
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM21 detected
Reading data from phone... OK
Calculating...
Exception: Access violation at address 00483EAF in module 'SamsungToolPRO.exe'. Read of address 00000000
Done with Samsung Tool PRO v.44.11 [SM-G960U,Read Codes via Server]