Samsung GT-I9060I Write Flash With Octopus

maanarman

Friend's Martview
Dec 1, 2016
2,907
399
karachi pakistan
Skype
maanarman
Sonork ID
100.1608345
Logs

Code:
Welcome to Octoplus Box Samsung software version 2.7.1
-----------------------------------------------------------------------------------
To connect SGH-I747 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
6. Go to dial window.
7. Enter "*#0808#" number.
8. Select "DM+Modem+ADB".
9. Press Home button.
10. Go to dial window.
11. Enter "*#7284#" number.
12. Set "UART" to "PDA" value.
13. Restart phone.
14. Press "Read Info" in software.
-----------------------------------------------------------------------------------
To connect GT-I9060I phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3. Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected firmware file: I9060IXXU0ANL6_I9060IODD0ANL6_NPL_Android_4.4.4.oct
Please put the phone into Download Mode and connect USB cable.
To put GT-I9060I into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOT section...
BOOT section has been written successfully.
Writing SBOOT section...
SBOOT section has been written successfully.
Writing SBOOT2 section...
SBOOT2 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing system section...
system section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing WDSP section...
WDSP section has been written successfully.
Writing CSC section...
CSC section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.
Performed by 2.7.1 Software version.
 
Top