Logs
Code:
Welcome to Octoplus Box Samsung software version 2.6.8
-----------------------------------------------------------------------------------
To connect SM-G925T phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
Selected BOOT file: C:\Users\test\Desktop\J327TUVS2ARC1
_TMB2ARC1\BL_J327TUVS2ARC1_CL12570667_QB17150371_REV00
_user_low_ship.tar.md5
Selected AP file: C:\Users\test\Desktop\J327TUVS2ARC1_TMB2ARC1
\AP_J327TUVS2ARC1_CL12570667_QB17150371_REV00
_user_low_ship_meta.tar.md5
Selected CP file: C:\Users\test\Desktop\J327TUVS2ARC1_TMB2ARC1
\CP_J327TUVS2ARC1_CP9080743_CL12570667_QB17150371_REV00
_user_low_ship.tar.md5
Selected CSC file: C:\Users\test\Desktop\J327TUVS2ARC1_TMB2ARC1
\CSC_TMB_J327TTMB2ARC1_CL12570667_QB17150371_REV00
_user_low_ship.tar.md5
Please put the phone into Download Mode and connect USB cable.
To put SM-J327T into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Advanced mode!
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing CM section...
CM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.
Performed by 2.6.8 Software version.