Logs
Code:
To connect SM-N920P phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
To connect SM-N920W8 phone you have to perform the following steps:
1. Disconnect USB cable from phone.
2. Go to Menu->Settings->More->About Device.
3.Tap on "Build number" 7 times to enable developer options.
4. Go to Menu->Settings->More->Developer options.
5. Turn on "USB Debugging" option.
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM3
Selected model: SM-N920W8
Operation: Reset FRP - UART UFS
Please put the phone into Download Mode and connect USB cable.
Waiting for phone...
Reading PIT...
PIT was read successfully.
Searching for UART interface..
COM8
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP / Reactivation lock is successfully reseted!
Performed by 2.6.8 Software version.
Code: