UAT samsung s24 ultra (sm-s928b) frp lock

[professorlinux]

Edl Process

1. Power off device
2. Press and hold volume up + volume down insert usb cable
3. In some case requires special edl cable or test points
4. Install Qualcomm drivers if needed
====================================
Waiting for QDLoader port... COM6
Connecting to device... OK
Port : COM6 : Qualcomm HS-USB QDLoader 9008
USB : USB\ROOT_HUB30\4&2C14DF5A&0&0
Drivers Info. : Qualcomm Incorporated, qcusbser.sys
Drivers : Qualcomm Technologies, Inc.
Driver Date : 11/20/2019
Driver Version : 2.1.3.8
Waiting for response... OK
Identifying device Mode... OK
Sahara Mode detected
Handshaking... OK
Init Handshake Sequence... OK
Initializing Protocol... OK
Configuring boot... OK
Version [19] Code Size [4297015] Signature Size [140509295] Header Type [NEW]
Connecting to flash programmer...OK
Chipset Type... 64 bit
Initializing connection... OK
Configuring device... OK
Firehose config : UFS [Sector:4096] [Target:0] [Host:1048576]
Reading partition map... OK - LUN Count : 6
Reading partition table.. OK [84]
Resetting FRP... OK

UAT PRO : 186.01 | 30 - April - 2025 [ 10:51:30 am ] VANUATU

Elapsed Time : 17 seconds