Logs
Code:
Welcome to Medusa Pro Software version 1.6.7.
Started.
Reader #0: Alcor Micro USB Smart Card Reader 0
Reader #1: FT SCR2000 0
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932305A066D08CFDB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 3.0
Product serial number : (hex) 5A066D08
Manufacturing date : 12/2012
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Ok
Disk/Image size : ab400000 bytes
Device sector size : 512 bytes
Partition offset : 221184
Number of sectors : 3072000
Device Manufacturer :samsung
Device Platform :msm8960
Build ID :ORG.08
Display Build ID :ORG.I9300XXUGNH4
Release ID :4.4.2
Device Model :SAMSUNG-GT-I9300
Device Name :d2uc
Architecture ABI :armeabi-v7a
Architecture ABI2 :armeabi
Build Description :d2uc-user 4.4.2 KOT49H I9300XXUGNH4 release-keys
Backup EXT_CSD saved to file C:/Program Files (x86)/LaunchBarCommander/EXT_CSD Backups/016G92_08_12_2018_18_26_55.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: modem (00002000, 0001E000) 60 MB
P02: sbl1 (00020000, 00000100) 128 KB
P03: sbl2 (00020100, 00000200) 256 KB
P04: sbl3 (00020300, 00000400) 512 KB
P05: aboot (00020700, 00001000) 2048 KB
P06: rpm (00021700, 00000400) 512 KB
P07: boot (00021B00, 00005000) 10 MB
P08: tz (00026B00, 00000400) 512 KB
P09: pad (00026F00, 00000400) 512 KB
P10: param (00027300, 00005000) 10 MB
P11: efs (0002C300, 00006D00) 13.62 MB
P12: modemst1 (00033000, 00001800) 3072 KB
P13: modemst2 (00034800, 00001800) 3072 KB
P14: system (00036000, 002EE000) 1500 MB
P15: userdata (00324000, 0187A000) 12.24 GB
P16: persist (01B9E000, 00004000) 8 MB
P17: cache (01BA2000, 001A4000) 840 MB
P18: recovery (01D46000, 00005000) 10 MB
P19: fota (01D4B000, 00005000) 10 MB
P20: backup (01D50000, 00003000) 6 MB
P21: fsg (01D53000, 00001800) 3072 KB
P22: ssd (01D54800, 00000010) 8 KB
P23: grow (01D54810, 00002800) 5 MB
Erasing partition GPT... Done.
Erasing partition modem... Done.
Erasing partition sbl1... Done.
Erasing partition sbl2... Done.
Erasing partition sbl3... Done.
Erasing partition aboot... Done.
Erasing partition rpm... Done.
Erasing partition boot... Done.
Erasing partition tz... Done.
Erasing partition pad... Done.
Erasing partition param... Done.
Erasing partition efs... Done.
Erasing partition modemst1... Done.
Erasing partition modemst2... Done.
Erasing partition system... Done.
Erasing partition userdata... Done.
Erasing partition persist... Done.
Erasing partition cache... Done.
Erasing partition recovery... Done.
Erasing partition fota... Done.
Erasing partition backup... Done.
Erasing partition fsg... Done.
Erasing partition ssd... Done.
Erasing partition grow... Done.
Erasing is finished.
SW: 1.6.7; FW: 1.24.
Switched to boot area partition 1.
Opening C:/Users/test/Desktop/GT-I9300(Recovery)/boot1.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Switched to boot area partition 2.
Opening C:/Users/test/Desktop/GT-I9300(Recovery)/boot2.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Switched to user area.
Opening C:/Users/test/Desktop/GT-I9300(Recovery)/userarea_64MiB.bin file...
Write data verification is enabled.
Writing. Please wait... Done.
SW: 1.6.7; FW: 1.24.
Disconnected.
Please disconnect battery and USB cable.
Model Settings:
Interface : eMMC
Voltage : 1.8V
Bus Mode : 1 bit
Bus speed : Auto
Connecting...
Device : Toshiba eMMC 016G92
Page size : 512 B
Block size : 512 B
Block count : 30777344
Size : 14.68 GB (15028.00 MB)
---------------------------------------------------------------
CID Info
CID : 110100303136473932305A066D08CFDB
Manufacturer ID : 0X11
Device/BGA : BGA (Discrete embedded)
OEM/Application ID : 0X00
Product name : 016G92
Product revision : 3.0
Product serial number : (hex) 5A066D08
Manufacturing date : 12/2012
---------------------------------------------------------------
CSD Info
CSD : D00E00320F5903FFFFFFFFEF92400045
CSD structure : CSD version No. 1.2
SPEC version : 4.1, 4.2, 4.3, 4.4, 4.41, 4.5,
4.51, 5.0, 5.01, 5.1
Data read access time1: 1 ms
TRAN speed : 26 MHz
READ block length : 512 Bytes
WP group enable : YES
PERM_WRITE_PROTECT : NO
TMP_WRITE_PROTECT : NO
---------------------------------------------------------------
EXTCSD Info
Revision 1.5 (for MMC v4.41)
Erase block size : 4096 Kbytes
Boot1 size : 4096 Kbytes
Boot2 size : 4096 Kbytes
RPMB size : 512 Kbytes
Partition config : (0x00) 00000000
Boot partition enable : Device not boot enabled (default)
(Bus width = 1Bit)
Boot ACK : No boot acknowledge sent (default)
Boot bus conditions : (0x00) 00000000
Boot bus width : x1 (sdr) or x4 (ddr) bus width in boot operation mode (default)
Reset boot bus conditions : Reset bus width to x1, single data rate and backward compatible timings after boot operation (default)
Boot mode : Use single data rate + backward compatible timings in boot operation (default)
RST_n function : (0x00) RST_n signal is temporary disabled (default)
Partitioning support : Device supports partitioning features
Enhanced attribute : Device can have enhanced technological features in partitions and user data area.
Max enhanced data size: 7700480 Kbytes
Partitions attribute : 0x0
Part setting completed: 0x0
GP partition 1 size : 0 b
GP partition 2 size : 0 b
GP partition 3 size : 0 b
GP partition 4 size : 0 b
Enhanced area size : (0x0) 0 b
Enhanced area start : (0x0) 0 b
---------------------------------------------------------------Searching Android build info...
Not found
---------------------------------------------------------------
Backup EXT_CSD saved to file C:/Program Files (x86)/LaunchBarCommander/EXT_CSD Backups/016G92_08_12_2018_18_31_01.bin.
Connect successful.
---------------------------------------------------------------
SW: 1.6.7; FW: 1.24.
P00: GPT (00000000, 00002000) 4 MB
P01: BOTA0 (00002000, 00002000) 4 MB
P02: BOTA1 (00004000, 00002000) 4 MB
P03: EFS (00006000, 0000A000) 20 MB
P04: PARAM (00010000, 00004000) 8 MB
P05: BOOT (00014000, 00004000) 8 MB
P06: RECOVERY (00018000, 00004000) 8 MB
P07: RADIO (0001C000, 00010000) 32 MB
P08: CACHE (0002C000, 00200000) 1024 MB
P09: SYSTEM (0022C000, 00300000) 1536 MB
P10: HIDDEN (0052C000, 00118000) 560 MB
P11: OTA (00644000, 00004000) 8 MB
P12: USERDATA (00648000, 016D2000) 11.41 GB
Selected pit file: E:/SAMSUNG/i9300/i9300.pit
Open file "E:/SAMSUNG/i9300/4.3/BOOTLOADER_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5".
Open file "E:/SAMSUNG/i9300/4.3/CODE_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5".
Open file "E:/SAMSUNG/i9300/4.3/MODEM_I9300XXUGMJ9_1902166_REV00_user_low_ship.tar.md5".
Open file "E:/SAMSUNG/i9300/4.3/CSC_I9300OXAGMJ9_1902166_REV00_user_low_ship.tar.md5".
Writing MBR...Done.
Writing primary GPT...Done.
Writing secondary GPT...Done.
Writing PIT
Write data verification is enabled.
Writing. Please wait...
Switched to boot area partition 1.
Writing partition BOOTLOADER... Done.
Writing partition TZSW... Done.
Switched to user area.
Writing partition PARAM... Done.
Writing partition BOOT... Done.
Writing partition RECOVERY... Done.
Writing partition RADIO... Done.
Writing partition CACHE... Done.
Writing partition SYSTEM... Done.
Writing partition HIDDEN... Done.
Writing is finished.
SW: 1.6.7; FW: 1.24.