Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFCA65740, 0xAB984511, 0x021E52BD, 0x7B2333CE
Get Chip ID... [MT6739]
Get SOC ID... [B9CCB2E818E5174C621733A9A4F2C1331770CB59C03E74C3B61A078BFD2CE45F]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xDF011853434136344710F3FA7E051CC9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SCA64G
EMMC_ID : 0xDF011853434136344710F3FA7E051CC9
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F000000 (58.23Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : SEGO
Product Manufacturer : SEGO
Product Model : Neo 20
Product Name : Neo_20
Product Device : Neo_20
Product Board : k39tv1_bsp_1g_k419
Board Platform : mt6739
Build ID : SP1A.210812.016
Build Date : Mon Aug 25 02:20:58 UTC 2025
Firmware Version : 1756086193
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6739/FRP_BACKUP_(2026-2-15_13-58-38)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 9.19
Work ID: 110095161
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0699
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6739]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xFCA65740, 0xAB984511, 0x021E52BD, 0x7B2333CE
Get Chip ID... [MT6739]
Get SOC ID... [B9CCB2E818E5174C621733A9A4F2C1331770CB59C03E74C3B61A078BFD2CE45F]
Get sec config... OK [00000000]
Load DownloadAgent... OK
Search DA... OK [1]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xDF011853434136344710F3FA7E051CC9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: SCA64G
EMMC_ID : 0xDF011853434136344710F3FA7E051CC9
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0E8F000000 (58.23Gb)
RAM INFO:
INT_SRAM: 0x0000020000 (128.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : SEGO
Product Manufacturer : SEGO
Product Model : Neo 20
Product Name : Neo_20
Product Device : Neo_20
Product Board : k39tv1_bsp_1g_k419
Board Platform : mt6739
Build ID : SP1A.210812.016
Build Date : Mon Aug 25 02:20:58 UTC 2025
Firmware Version : 1756086193
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6739/FRP_BACKUP_(2026-2-15_13-58-38)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!
Selected model: Mediatek Mediatek
Operation: Erase FRP
Software version: 9.19
Work ID: 110095161