Dear members
post successful operation became one of the most popular threads for new products
BR
Toto
post successful operation became one of the most popular threads for new products
BR
Toto
Press LIKE Button
Infinity Successfully unlocked repaired by Infinity-Box posts
- Thread starter GsmToto
- Start date
Infinity Box & Dongle
rameshwar sharma
Friend's Martview
- Jul 20, 2019
- 171
- 139
REALME C3 RMX1825 HANG ON LOGO DONE BY CM2 FLASHING
Code:
Preloader [HW DEV] Info :
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6771.bin
EMI : CNT : 0009
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
Operation : Write Flash [ v2.20 ]
Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :24
[FL] : Set : preloader_oppo6771.bin
[FL] : Set : recovery.img
[FL] : Set : opporeserve2.img
[FL] : Set : md1img.img
[FL] : Set : spmfw.img
[FL] : Set : scp.img
[FL] : Set : scp.img
[FL] : Set : sspm.img
[FL] : Set : sspm.img
[FL] : Set : cam_vpu1.img
[FL] : Set : cam_vpu2.img
[FL] : Set : cam_vpu3.img
[FL] : Set : lk.img
[FL] : Set : lk.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tee.img
[FL] : Set : tee.img
[FL] : Set : odm.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x206A87368 [ 8.10 GB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM22)
MODE : BOOTROM
PORT : 22
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
CODE : Sylvia
TYPE : MODERN RAPHAEL
BROM : MEID : 1F9AA7A22C1363A7F5FBBF559B0FD444
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : A1K-A12-A31-A32 | Manual : Disabled
BROM : SOCID : 7EF7609D572E6F0D98E46C1690B1CFF0AA53D2074EE4B451022A6864F8C42D00
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6771
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6771.bin
EMI : CNT : 0009
EMI : [00] : eMMC : DDR3 : ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [01] : eMMC : DDR3 : ID : 90014A68423861503E : VEN : HYNIX | DEV : hB8aP> : RAM : [ 3.00 GB ]
EMI : [02] : eMMC : DDR3 : ID : 13014E53304A394638 : VEN : MICRON | DEV : S0J9F8 : RAM : [ 4.00 GB ]
EMI : [03] : eMMC : DDR3 : ID : 90014A484347386134 : VEN : HYNIX | DEV : HCG8a4 : RAM : [ 4.00 GB ]
EMI : [04] : eMMC : DDR3 : ID : 13014E53304A394E38 : VEN : MICRON | DEV : S0J9N8 : RAM : [ 4.00 GB ]
EMI : [05] : eMMC : DDR3 : ID : 150100475036424D42 : VEN : SAMSUNG | DEV : GP6BMB : RAM : [ 3.00 GB ]
EMI : [06] : eMMC : DDR3 : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 3.00 GB ]
EMI : [07] : eMMC : DDR3 : ID : 150100514436334D42 : VEN : SAMSUNG | DEV : QD63MB : RAM : [ 2.00 GB ]
EMI : [08] : eMMC : DDR3 : ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00039000 [ 228.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]
EMMC: 90014A484347386134A55089ED6016DF
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HCG8a4
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE8F800000 [ 58.24 GB ]
CHIP : MT6771 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : A6422ED849CADE82747BABB4EC18361
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000004188000
Erase : 0x0000000008A88000 : 0x0000000001500000
Erase : 0x000000000BF88000 : 0x0000000006000000
Erase : 0x0000000013000000 : 0x0000000000800000
Erase : 0x0000000016800000 : 0x0000000000200000
Erase : 0x0000000016D00000 : 0x000000000C000000
Erase : 0x000000002AD00000 : 0x00000003A6B00000
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing now ...
Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : OPPORESERVE2
Write : MD1IMG
Write : SPMFW
Write : SCP1
Write : SCP2
Write : SSPM_1
Write : SSPM_2
Write : CAM_VPU1
Write : CAM_VPU2
Write : CAM_VPU3
Write : LK
Write : LK2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : ODM
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : RePartition
[FL] : RePartition Ok!
[FL] : Flashing finished!
Varoxx
Active Member
- Nov 6, 2019
- 84
- 51
Tecno cc6 frp reset done with cm2mtk2
Operation : Reset Settings/Format FS [ v2.20 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM113)
MODE : BOOTROM
PORT : 113
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : MEID : 87E6AA86EF868963AD2284041F190989
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 19E809B3042E629DE21E2DCBF8DA6EE7D9B66AEC8FD18B7A941F44071859FFCD
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: 150100474436424D42016B489B52A6ED
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FB08B41284B93AFCDC7EE4FEE64543D5
DA : USB : HIGH-SPEED
Boot done!
SmartInfo : 0x815657
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
Operation : Reset Settings/Format FS [ v2.20 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM113)
MODE : BOOTROM
PORT : 113
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0200
CODE : Merlot
TYPE : MODERN RAPHAEL
BROM : MEID : 87E6AA86EF868963AD2284041F190989
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 19E809B3042E629DE21E2DCBF8DA6EE7D9B66AEC8FD18B7A941F44071859FFCD
BROM : SLA : Local Auth
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6761
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : PRELOADER_INFINITY_0
EMI : CNT : 0002
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x0003A000 [ 232.00 KB ]
DRAM: 0xC0000000 [ 3.00 GB ]
EMMC: 150100474436424D42016B489B52A6ED
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GD6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6761 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FB08B41284B93AFCDC7EE4FEE64543D5
DA : USB : HIGH-SPEED
Boot done!
SmartInfo : 0x815657
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
oppo reno 3 done with infinity box v2.21
Operation : HW Report [ v2.21 ]
HWreport : Mode : UFS
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 6C0A032B0442DF619448A0407A97EADF
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : MT6779_GEN | Manual : Disabled
BROM : SOCID : CB30E214B8FCD1F680CD77CDF113E3CD04FA955F01FDDFC9415B44B977415F9C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6779.bin
EMI : CNT : 000D
EMI : [00] : eUFS : LP_DDR4X : DEV : KM2V7001CM-B706 : RAM : [ 6.00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6.00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM5V7001DM-B621 : RAM : [ 4.00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM2B8001CM-BB01 : RAM : [ 6.00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : KM8V7001JM-B810 : RAM : [ 8.00 GB ]
EMI : [07] : eUFS : LP_DDR4X : DEV : KM8B8001JM-BC01 : RAM : [ 8.00 GB ]
EMI : [08] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8.00 GB ]
EMI : [09] : eUFS : LP_DDR4X : DEV : H9HQ16AFAMMDAR : RAM : [ 8.00 GB ]
EMI : [0A] : eUFS : LP_DDR4X : DEV : H9HQ22AECMMDAR : RAM : [ 6.00 GB ]
EMI : [0B] : eUFS : LP_DDR4X : DEV : KM2V8001CM-B707 : RAM : [ 6.00 GB ]
EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: CE014B4D3856383030314A4D2D423831
UFS:
VEN : 0x01CE
VID : KM8V8001JM-B81
IFW : 1000
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 00340031006100390066006100650063
REG : 0x101010000
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 588B9BF3A0EB69EC9C08DE064A0E8BBC
DA : USB : HIGH-SPEED
Boot done!
Memory Info :
CID : KM8V8001JM-B813
EXT_CSD Info :
[UFS] Device Desc:
[UFS] String Desc: Serial Number INDEX 2, LENGTH 24
[UFS] Serial Number: 003400310061003900660061006500630066006300310064
[UFS] life cycle check, pre_eol_info=1, life_time_est_a=1, life_time_est_b=1
[UFS] vendor id : 0x1ce
[UFS] ufs id : KM8V8001JM-B813
[UFS] ufs fwver: 1000
[UFS] dev_quirk = 0x0
[UFS] Custom force provison=0, TW size=-1GB, TW no red=1, HPB size=-1GB
[UFS] info: number of active LU: 3, check OK.
[UFS] info: number of Boot LU: 2, check OK.
[UFS] info: LU Configuration Check OK. Bootable UFS
[UFS] info: Boot LU Configuration Check OK. Active Boot LU: LU0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] info: HS-G3-2
Overall status :
MLC status : 0% - 10% used
SLC status : 0% - 10% used
EOL status : Normal ( Less than 80% reserved blocks used )
RPMB : RPMB KEY NOT set! [State : CLEAN : USABLE]
Done!
Elapsed: 00:00:18
Operation : Reset Settings/Format FS [ v2.21 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 6C0A032B0442DF619448A0407A97EADF
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : MT6779_GEN | Manual : Disabled
BROM : SOCID : CB30E214B8FCD1F680CD77CDF113E3CD04FA955F01FDDFC9415B44B977415F9C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6779.bin
EMI : CNT : 000D
EMI : [00] : eUFS : LP_DDR4X : DEV : KM2V7001CM-B706 : RAM : [ 6.00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6.00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM5V7001DM-B621 : RAM : [ 4.00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM2B8001CM-BB01 : RAM : [ 6.00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : KM8V7001JM-B810 : RAM : [ 8.00 GB ]
EMI : [07] : eUFS : LP_DDR4X : DEV : KM8B8001JM-BC01 : RAM : [ 8.00 GB ]
EMI : [08] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8.00 GB ]
EMI : [09] : eUFS : LP_DDR4X : DEV : H9HQ16AFAMMDAR : RAM : [ 8.00 GB ]
EMI : [0A] : eUFS : LP_DDR4X : DEV : H9HQ22AECMMDAR : RAM : [ 6.00 GB ]
EMI : [0B] : eUFS : LP_DDR4X : DEV : KM2V8001CM-B707 : RAM : [ 6.00 GB ]
EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: CE014B4D3856383030314A4D2D423831
UFS:
VEN : 0x01CE
VID : KM8V8001JM-B81
IFW : 1000
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 00340031006100390066006100650063
REG : 0x101010000
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 588B9BF3A0EB69EC9C08DE064A0E8BBC
DA : USB : HIGH-SPEED
Boot done!
SmartInfo : 0x825757
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:31
Reconnect Power/Cable!
Operation : HW Report [ v2.21 ]
HWreport : Mode : UFS
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 6C0A032B0442DF619448A0407A97EADF
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : MT6779_GEN | Manual : Disabled
BROM : SOCID : CB30E214B8FCD1F680CD77CDF113E3CD04FA955F01FDDFC9415B44B977415F9C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6779.bin
EMI : CNT : 000D
EMI : [00] : eUFS : LP_DDR4X : DEV : KM2V7001CM-B706 : RAM : [ 6.00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6.00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM5V7001DM-B621 : RAM : [ 4.00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM2B8001CM-BB01 : RAM : [ 6.00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : KM8V7001JM-B810 : RAM : [ 8.00 GB ]
EMI : [07] : eUFS : LP_DDR4X : DEV : KM8B8001JM-BC01 : RAM : [ 8.00 GB ]
EMI : [08] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8.00 GB ]
EMI : [09] : eUFS : LP_DDR4X : DEV : H9HQ16AFAMMDAR : RAM : [ 8.00 GB ]
EMI : [0A] : eUFS : LP_DDR4X : DEV : H9HQ22AECMMDAR : RAM : [ 6.00 GB ]
EMI : [0B] : eUFS : LP_DDR4X : DEV : KM2V8001CM-B707 : RAM : [ 6.00 GB ]
EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: CE014B4D3856383030314A4D2D423831
UFS:
VEN : 0x01CE
VID : KM8V8001JM-B81
IFW : 1000
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 00340031006100390066006100650063
REG : 0x101010000
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 588B9BF3A0EB69EC9C08DE064A0E8BBC
DA : USB : HIGH-SPEED
Boot done!
Memory Info :
CID : KM8V8001JM-B813
EXT_CSD Info :
[UFS] Device Desc:
[UFS] String Desc: Serial Number INDEX 2, LENGTH 24
[UFS] Serial Number: 003400310061003900660061006500630066006300310064
[UFS] life cycle check, pre_eol_info=1, life_time_est_a=1, life_time_est_b=1
[UFS] vendor id : 0x1ce
[UFS] ufs id : KM8V8001JM-B813
[UFS] ufs fwver: 1000
[UFS] dev_quirk = 0x0
[UFS] Custom force provison=0, TW size=-1GB, TW no red=1, HPB size=-1GB
[UFS] info: number of active LU: 3, check OK.
[UFS] info: number of Boot LU: 2, check OK.
[UFS] info: LU Configuration Check OK. Bootable UFS
[UFS] info: Boot LU Configuration Check OK. Active Boot LU: LU0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] warn: Power on, reset, or bus device reset occupied
[UFS] Sense Data: ASC=29, ASCQ=0
[UFS] info: HS-G3-2
Overall status :
MLC status : 0% - 10% used
SLC status : 0% - 10% used
EOL status : Normal ( Less than 80% reserved blocks used )
RPMB : RPMB KEY NOT set! [State : CLEAN : USABLE]
Done!
Elapsed: 00:00:18
Operation : Reset Settings/Format FS [ v2.21 ]
Mode : SMART RESET
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM13)
MODE : BOOTROM
PORT : 13
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000
CODE : Lafite
TYPE : MODERN RAPHAEL
BROM : MEID : 6C0A032B0442DF619448A0407A97EADF
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : Oppo : MT6779_GEN | Manual : Disabled
BROM : SOCID : CB30E214B8FCD1F680CD77CDF113E3CD04FA955F01FDDFC9415B44B977415F9C
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6779
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6752
EMI : SRC : preloader_oppo6779.bin
EMI : CNT : 000D
EMI : [00] : eUFS : LP_DDR4X : DEV : KM2V7001CM-B706 : RAM : [ 6.00 GB ]
EMI : [01] : eUFS : LP_DDR4X : DEV : KM8V7001JA-B813 : RAM : [ 8.00 GB ]
EMI : [02] : eMMC : LP_DDR4X : ID : 90014A68433861503E : VEN : HYNIX | DEV : hC8aP> : RAM : [ 4.00 GB ]
EMI : [03] : eUFS : LP_DDR4X : DEV : H9HQ16AECMMDAR : RAM : [ 6.00 GB ]
EMI : [04] : eUFS : LP_DDR4X : DEV : KM5V7001DM-B621 : RAM : [ 4.00 GB ]
EMI : [05] : eUFS : LP_DDR4X : DEV : KM2B8001CM-BB01 : RAM : [ 6.00 GB ]
EMI : [06] : eUFS : LP_DDR4X : DEV : KM8V7001JM-B810 : RAM : [ 8.00 GB ]
EMI : [07] : eUFS : LP_DDR4X : DEV : KM8B8001JM-BC01 : RAM : [ 8.00 GB ]
EMI : [08] : eUFS : LP_DDR4X : DEV : KM8V8001JM-B813 : RAM : [ 8.00 GB ]
EMI : [09] : eUFS : LP_DDR4X : DEV : H9HQ16AFAMMDAR : RAM : [ 8.00 GB ]
EMI : [0A] : eUFS : LP_DDR4X : DEV : H9HQ22AECMMDAR : RAM : [ 6.00 GB ]
EMI : [0B] : eUFS : LP_DDR4X : DEV : KM2V8001CM-B707 : RAM : [ 6.00 GB ]
EMI : [0C] : DRAM : LP_DDR4X : ID : NOT_DEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x200000000 [ 8.00 GB ]
UFS: CE014B4D3856383030314A4D2D423831
UFS:
VEN : 0x01CE
VID : KM8V8001JM-B81
IFW : 1000
LU0 : 0x00400000 [ 4.00 MB ]
LU1 : 0x00400000 [ 4.00 MB ]
LU2 : 0x1DCB000000 [ 119.17 GB ]
FSN : 00340031006100390066006100650063
REG : 0x101010000
CHIP : MT6779 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000
RNID : 588B9BF3A0EB69EC9C08DE064A0E8BBC
DA : USB : HIGH-SPEED
Boot done!
SmartInfo : 0x825757
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:31
Reconnect Power/Cable!
VIVO V1632 UNLOCK DONE BY CM2
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1632 (COM22)
MODE : BOOTROM
PORT : 22
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : MEID : 2B093989E085A5BFD8773A9EBF031412
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BOOTROM
BROM : SOCID : 9E35D4CDC9117AD6E8D3726C7A36486DBF93F90428ECC4C1E0AE3ACC9456EB4C
BROM : Configuring target for META
BROM : META configured!
INIT : META confirmed!
Boot done!
AP_CHIP : MT6765,S01
AP_SWVR : alps-mp-o1.mp6.tc19sp-V2_k62v1.64.bsp_P293
AP_HWVR : S01
Format Ok : UserData
- > Format in META will NOT reset FRP!
Done!
Elapsed: 00:00:50
Reconnect Power/Cable!
=-rebel-=
Moderator
=-rebel-=
Moderator
=-rebel-=
Moderator
yuslamunique
Friend's Martview
Operation : Check / Read Info [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 32AF4BAFF2F05DAAF2400334A5139954
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkR.fg
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
Done!
Elapsed: 00:00:13
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 32AF4BAFF2F05DAAF2400334A5139954
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkR.fg
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
RIV : ALTFormat
Format Done!
Done!
Elapsed: 00:03:46
Reconnect Power/Cable!
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 32AF4BAFF2F05DAAF2400334A5139954
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkR.fg
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
Done!
Elapsed: 00:00:13
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( '*' )
Wait for phone...
Phone found! [ 155 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0000
BB_CPU_SN : 32AF4BAFF2F05DAAF2400334A5139954
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_NkR.fg
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
RIV : ALTFormat
Format Done!
Done!
Elapsed: 00:03:46
Reconnect Power/Cable!
KARBONN TITANIUM S9 PLUS FORMAT & FRP UNLOCK SUCCESS,
Card found : E8683082 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.17
Load IDBase v729152 Ok!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000
Error : Failed erase block!
>>> Try select another format mode!
Reconnect Power/Cable!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000
Error : Failed erase block!
>>> Try select another format mode!
Reconnect Power/Cable!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
Card found : E8683082 , v0147
Infinity-Box [ Chinese Miracle ] MediaTek Service Module [ MTK ] v2.17
Load IDBase v729152 Ok!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2044 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000
Error : Failed erase block!
>>> Try select another format mode!
Reconnect Power/Cable!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( WIPE + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
ERR : 0xC002002A
ERR : SEC : IMG TYPE MISMATCH
ERR : 0x00001000|0x00001000
Error : Failed erase block!
>>> Try select another format mode!
Reconnect Power/Cable!
Operation : Reset Settings/Format FS [ v2.17 ]
Mode : FULL FACTORY ( FORCED + FRP )
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek PreLoader USB VCOM_V1633 (Android) (COM6)
MODE : PRELOADER PORT
PORT : 6
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2028 | Manual : Disabled
BROM : SOCID : 03EC8254C603DECDD97127B03D8E01F69794F15162D69D66F52EC47817F761CE
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 90014A484247346132A561003424B56D
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HBG4a2
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : FDA4945DE2B757F264C7A7C762AB091C
DA : USB : HIGH-SPEED
Boot done!
Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA
Done!
Elapsed: 00:00:20
Reconnect Power/Cable!
GSM *AR
Junior Member
Operation : Identify [ v2.27 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 9C805716B5DC848F7F92AEB2CDBD72C2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E1F430A27DDF336E356B5F453BF7C825738E4504056939262773CF04A8F36F51
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
EMMC: CID : 90014A4834473261110235C5C5336597
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 902153523 ( 0x35C5C533) , MF : 6/2018
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : D60785F144812D9EC5C6D55C6FEAC22
DA : USB : HIGH-SPEED
Boot done!
Patch Level : MRA58K
Display ID : Digit_M42456DG_B138_SW01_20210115_1458
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 15.01.2021
Product Model : Digit4G-Music
Product Brand : Digit
Product Name : Digit4G-Music
Product Device : Digit4G-Music
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G-Music
Product Model : mt6731
USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption ***)
STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : LOCKED PERMANENTLY!
PRELOADER : DEVICE :
DEV : MT6739
NME : preloader_fise6731_kaio_m.bin
CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN | DEV : Biwin : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512.00 MB ]
Done!
Elapsed: 00:00:13
Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt
Patch Level : MRA58K
Display ID : Digit_M42456DG_B138_SW01_20210115_1458
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 15.01.2021
Product Model : Digit4G-Music
Product Brand : Digit
Product Name : Digit4G-Music
Product Device : Digit4G-Music
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G-Music
Product Model : mt6731
Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN | DEV : Biwin : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512.00 MB ]
Operation : Write Flash [ v2.27 ]
Repartition : Disabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :3
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x1C394384 [ 451.58 MB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 9C805716B5DC848F7F92AEB2CDBD72C2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E1F430A27DDF336E356B5F453BF7C825738E4504056939262773CF04A8F36F51
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
EMMC: CID : 90014A4834473261110235C5C5336597
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 902153523 ( 0x35C5C533) , MF : 6/2018
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : D60785F144812D9EC5C6D55C6FEAC22
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000008000 : 0x0000000000100000
Erase : 0x0000000001908000 : 0x0000000001580000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x000000000E700000 : 0x0000000002000000
Erase : 0x0000000014000000 : 0x00000000CE9FBE00
[FL] : Flashing now ...
Write : SYSTEM
Write : CACHE
Write : USERDATA
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Flashing finished!
Done!
Elapsed: 00:01:06
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 9C805716B5DC848F7F92AEB2CDBD72C2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E1F430A27DDF336E356B5F453BF7C825738E4504056939262773CF04A8F36F51
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
EMMC: CID : 90014A4834473261110235C5C5336597
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 902153523 ( 0x35C5C533) , MF : 6/2018
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : D60785F144812D9EC5C6D55C6FEAC22
DA : USB : HIGH-SPEED
Boot done!
Patch Level : MRA58K
Display ID : Digit_M42456DG_B138_SW01_20210115_1458
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 15.01.2021
Product Model : Digit4G-Music
Product Brand : Digit
Product Name : Digit4G-Music
Product Device : Digit4G-Music
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G-Music
Product Model : mt6731
USERDATA : FILESYSTEM : EXT4 with FDE ( Full Disk Encryption ***)
STORAGE : Life Status : eMMC : OK!
STORAGE : OTP Status : LOCKED PERMANENTLY!
PRELOADER : DEVICE :
DEV : MT6739
NME : preloader_fise6731_kaio_m.bin
CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN | DEV : Biwin : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512.00 MB ]
Done!
Elapsed: 00:00:13
Created by Infinity-Box (c) 2021
Chinese Miracle II : MediaTek Service Module
Device Info file : _Android_info.txt
Patch Level : MRA58K
Display ID : Digit_M42456DG_B138_SW01_20210115_1458
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2015-10-01
Build Time : 15.01.2021
Product Model : Digit4G-Music
Product Brand : Digit
Product Name : Digit4G-Music
Product Device : Digit4G-Music
Product Manfct : alps
Board Platform : mt6739
Product Info : Digit4G-Music
Product Model : mt6731
Preloader [HW DEV] Info :
EMI : DEV : MT6739
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : [00] : eMMC : DDR3 : ID : 700100454534454434 : VEN : KINGSTON | DEV : EE4ED4 : RAM : [ 512.00 MB ]
EMI : [01] : eMMC : DDR3 : ID : F40122426977696E20 : VEN : BIWIN | DEV : Biwin : RAM : [ 512.00 MB ]
EMI : [02] : eMMC : DDR3 : ID : 150100463558354342 : VEN : SAMSUNG | DEV : F5X5CB : RAM : [ 512.00 MB ]
EMI : [03] : eMMC : DDR3 : ID : 150100464A32354142 : VEN : SAMSUNG | DEV : FJ25AB : RAM : [ 512.00 MB ]
EMI : [04] : eMMC : DDR3 : ID : FE014E50314A39344D : VEN : MICRON | DEV : P1J94M : RAM : [ 512.00 MB ]
EMI : [05] : eMMC : DDR3 : ID : 90014A483447326111 : VEN : HYNIX | DEV : H4G2a : RAM : [ 512.00 MB ]
Operation : Write Flash [ v2.27 ]
Repartition : Disabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled
Files :3
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img
[FL] : Total size : 0x1C394384 [ 451.58 MB ]
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port_V1633 (COM5)
MODE : BOOTROM
PORT : 5
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
CODE : Zion
TYPE : MODERN [RAPHAEL]
BROM : MEID : 9C805716B5DC848F7F92AEB2CDBD72C2
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+EXT
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
BROM : SOCID : E1F430A27DDF336E356B5F453BF7C825738E4504056939262773CF04A8F36F51
BROM : SLA : Local Auth
BROM : SLA : Auth Started!
BROM : SLA : Auth Passed!
BROM : SLA : 0x0000001F
AGENT : 0_base : BASE_v2112 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : FireFly
EMI : SRC : preloader_fise6731_kaio_m.bin
EMI : CNT : 0006
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
EMMC: CID : 90014A4834473261110235C5C5336597
EMMC: VEN : HYNIX : OEM : 74 : ID : 483447326111
EMMC: VEN : HYNIX : H4G2a
EMMC: SNN : 902153523 ( 0x35C5C533) , MF : 6/2018
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0xE9000000 [ 3.64 GB ]
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001 , EVOL : 0x0000
RNID : D60785F144812D9EC5C6D55C6FEAC22
DA : USB : HIGH-SPEED
Boot done!
[FL] : HW verification passed!
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Pre-Erase
Erase : 0x0000000000008000 : 0x0000000000100000
Erase : 0x0000000001908000 : 0x0000000001580000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000A00000
Erase : 0x000000000E700000 : 0x0000000002000000
Erase : 0x0000000014000000 : 0x00000000CE9FBE00
[FL] : Flashing now ...
Write : SYSTEM
Write : CACHE
Write : USERDATA
SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432
[FL] : Flashing finished!
Done!
Elapsed: 00:01:06
Infinity-Box
Product Manager
- Feb 10, 2019
- 3,550
- 939
Dear Sirs,
If you have good flash files and if you want to share it with other users please use IOS File Uploader Tool
Please upload only GOOD WORKING files without password