Telenor infinty e5 logo hang done

muzmil

Active Member
Oct 13, 2018
20
22
Skype
live:b108f1383f7ea8fb
  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
Waiting for device connection ...


Device not found!
>> Check cable, battery, connection and drivers!

Reconnect Power/Cable!


Operation : Write Flash [ v2.11 ]

Repartition : Enabled
Flash Verify : Disabled
Reg.Pre-Erase : Enabled
Verify HW/SW : Enabled
SData Backup : Disabled
Safe UserData : Disabled
Flash Format : Disabled

Files :19
[FL] : Set : preloader_ww860_39_p0_2g.bin
[FL] : Set : recovery.img
[FL] : Set : md1rom.img
[FL] : Set : md1dsp.img
[FL] : Set : spmfw.img
[FL] : Set : mcupmfw.img
[FL] : Set : lk.bin
[FL] : Set : lk.bin
[FL] : Set : loader_ext.img
[FL] : Set : loader_ext.img
[FL] : Set : boot.img
[FL] : Set : logo.bin
[FL] : Set : dtbo.img
[FL] : Set : tz.img
[FL] : Set : tz.img
[FL] : Set : vendor.img
[FL] : Set : system.img
[FL] : Set : cache.img
[FL] : Set : userdata.img

[FL] : Total size : 0x8B65A710 [ 2.18 GB ]

  1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
  2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM_V1632 (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0002
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0xFF|0x03
BROM : PRELOADER PORT
MODE : 0_base : BASE_v2012 | Manual : Disabled
BROM : SOCID : 3030064C71361C5BBF26A91F2304C430813E754EDFDFD004229A0474D2570CFC
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]

EMMC: 90014A4841473265507540031457685
EMMC: VEN : HYNIX | OEM : 4A01 | DEV : HAG2e
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x3AB800000 [ 14.68 GB ]

CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 2B1A71A212464938EC0D06232717A26

DA : USB : HIGH-SPEED

Boot done!

[FL] : HW verification passed!

SEC_DL : False (RAPHAEL)
SEC_ID : 0x494E46494E495459424F584245535432

[FL] : Pre-Erase
Erase : 0x0000000000000000 : 0x0000000002E88000
Erase : 0x0000000003688000 : 0x0000000004000000
Erase : 0x0000000008800000 : 0x0000000000800000
Erase : 0x000000000C000000 : 0x0000000000200000
Erase : 0x000000000C500000 : 0x0000000007200000
Erase : 0x0000000013C00000 : 0x0000000000200000
Erase : 0x0000000013E20000 : 0x000000019D9E0000

[FL] : RePartition
[FL] : RePartition Ok!


[FL] : Flashing now ...

Write : PRELOADER
Update bootloader backup copy ...
Update bootloader backup copy Ok!
Write : RECOVERY
Write : MD1IMG
Write : MD1DSP
Write : SPMFW
Write : MCUPMFW
Write : LK
Write : LK2
Write : LOADER_EXT1
Write : LOADER_EXT2
Write : BOOT
Write : LOGO
Write : DTBO
Write : TEE1
Write : TEE2
Write : VENDOR
Write : SYSTEM
Write : CACHE
Write : USERDATA

[FL] : RePartition
[FL] : RePartition Ok!

[FL] : Flashing finished!

Done!
Elapsed: 00:01:47

Reconnect Power/Cable!

MT6739__SPA_Condor_Electronics__Infinity_E5__9__Infinity_e5_V6.0_20190320__PPR1.180610.011__Infinity_E5

for file contact me on whatsapp
03421959546
 
  • Like
Reactions: thander.cat
Top