UFI Factory Reset Fail

[DocToRGSM]

BROM version[1]: 7.1625.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: f290181f3f1f47f1e74fbccd9de739a6cd83e4ef, size: 6.11 MiB
version: 3.3001.00.00, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Scanning BootROM or Preloader port... Done.
Detected [DA] MediaTek PreLoader USB VCOM (Android) (COM7)
Connection status: EHCI:HUB:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1437.1, date: 9-11-2014



Factory reset...
Creating filesystem with parameters:
Size: 132120576
Block size: 4096
Blocks per group: 32768
Inodes per group: 8064
Inode size: 256
Journal blocks: 1024
Label:
Blocks: 32256
Block groups: 1
Reserved block group size: 7
Created filesystem with 13/8064 inodes and 1544/32256 blocks
Writing cache... failed
Creating filesystem with parameters:
Size: 2092957696
Block size: 4096
Blocks per group: 32768
Inodes per group: 7984
Inode size: 256
Journal blocks: 7984
Label:
Blocks: 510976
Block groups: 16
Reserved block group size: 127
Created filesystem with 11/127744 inodes and 16777/510976 blocks
Writing userdata... failed


and so on any phone model on the MTK platform

 

[Thanos_92]

solder only D0,CMD,CLK and GND.connect good data cable from device to PC.then do factory reset.tested

 

[DocToRGSM]

I meant android tool box

 

[Thanos_92]

I meant android tool box

ohh sorry,then try unintall driver and install latest driver,try on another port and use good usb cable

 

[palashtelecom2]

Connection status: XHCI:HUB3[#1]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8839-8436
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 8 bit (HS SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: GX6BAB (0x475836424142), rev: 0x03, serial number: 0x74EFCC88
Manufacturing date: Sep 2020
CID: 15010047 58364241 420374EF CC889784
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x03
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 29.12 GiB(31,268,536,320 bytes)

Factory Reset...
failed
failed
failed