Vivo PD2140BF (Vivo Y15s) PATTERN UNLOCK DONE JUST CONECT PHONE IN PRELODER MODE 
Selected model: Vivo PD2140BF (Vivo Y15s)
Operation: Erase FRP And Wipe
Software version: 9.4
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM56 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x9D9D42E7, 0xCEDBD731, 0x358A8035, 0x41A0C974
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: 4X6KMB
EMMC_ID : 0x1501003458364B4D42095D2CD0722857
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2120
Product Name : 2020
Product Device : 2120
Product Board : k65v1_32_bsp_2g_ago
Board Platform : mt6765
Build ID : SP1A.210812.003
Build Date : Thu Jul 10 16:58:16 CST 2025
Display ID : PD2140F_EX_A_6.45.4
Security Patch : 2024-10-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler07101701
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2140BF%20(Vivo%20Y15s)/FRP_BACKUP_(2025-9-13_14-11-37)/
Format FRP... [P3] OK
Formatting "userdata" partition... [P3] OK
Formatting "cache" partition... [P3] OK
Formatting "metadata" partition... [P3] OK
Formatting "md_udc" partition... [P3] OK
Wipe data done!
Selected model: Vivo PD2140BF (Vivo Y15s)
Operation: Erase FRP And Wipe
Software version: 9.4
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM56 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x9D9D42E7, 0xCEDBD731, 0x358A8035, 0x41A0C974
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: disabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: 4X6KMB
EMMC_ID : 0x1501003458364B4D42095D2CD0722857
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2120
Product Name : 2020
Product Device : 2120
Product Board : k65v1_32_bsp_2g_ago
Board Platform : mt6765
Build ID : SP1A.210812.003
Build Date : Thu Jul 10 16:58:16 CST 2025
Display ID : PD2140F_EX_A_6.45.4
Security Patch : 2024-10-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler07101701
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD2140BF%20(Vivo%20Y15s)/FRP_BACKUP_(2025-9-13_14-11-37)/
Format FRP... [P3] OK
Formatting "userdata" partition... [P3] OK
Formatting "cache" partition... [P3] OK
Formatting "metadata" partition... [P3] OK
Formatting "md_udc" partition... [P3] OK
Wipe data done!
