vivo s1 frp unlock done android 12
Selected model: Vivo PD1913F (Vivo S1)
Operation: Erase FRP
Software version: 9.6
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM212 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xC054B18D, 0x939E7E44, 0x94F4A7A8, 0x320820FC
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DMB
EMMC_ID : 0x150100445636444D4202FF129021C699
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: 30% - 40% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1907
Product Name : 1907N
Product Device : 1907N
Product Board : k68v1_64
Board Platform : MTK6768
Build ID : SP1A.210812.003
Build Date : Mon Oct 21 15:02:57 CST 2024
Display ID : SP1A.210812.003 release-keys
Security Patch : 2022-08-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler10211509
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1913F%20(Vivo%20S1)/FRP_BACKUP_(2025-10-2_11-45-5)/
Format FRP... [P1] OK
Erase FRP done!
Selected model: Vivo PD1913F (Vivo S1)
Operation: Erase FRP
Software version: 9.6
Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM212 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xC054B18D, 0x939E7E44, 0x94F4A7A8, 0x320820FC
Load DownloadAgent... OK
Search DA... OK [3]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DV6DMB
EMMC_ID : 0x150100445636444D4202FF129021C699
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1EC00000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: 30% - 40% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1907
Product Name : 1907N
Product Device : 1907N
Product Board : k68v1_64
Board Platform : MTK6768
Build ID : SP1A.210812.003
Build Date : Mon Oct 21 15:02:57 CST 2024
Display ID : SP1A.210812.003 release-keys
Security Patch : 2022-08-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler10211509
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_PD1913F%20(Vivo%20S1)/FRP_BACKUP_(2025-10-2_11-45-5)/
Format FRP... [P1] OK
Erase FRP done!
