EasyJtag Suite Classic ver.: 3.8.0.15 / wxWidgets 3.3.2-W-U started.
OS ver.: Windows 10 (build 19045), 64-bit edition. Admin rights OK
CrashSender library ver:1.4.0.3
Curl binary ver:7.56.1.0
EasyJTAG binary ver:3.8.0.15
EasyJTAG SPI Plugin ver:1.1.1.13
LibUSB Library ver:1.2.6.0
WinFSP SDK ver:1.12.22301.0
Hardware Version 2 presets initialized
Setting box Pinout ...
Box Drivers version: 10.0.19041.3636
Z3X Card Serial : AAFA-E280 , ver: 22
Z3X Card Activation [JTAGPLUS] : ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
For more information press F1 to open local help or visit our wiki
Found 2 serial devices
COM1 ACPI\VEN_PNP&DEV_0501 Communications Port (COM1)
COM5 USB\VID_1781&PID_AAAC&REV_0100&MI_00 USB Serial Device (COM5)
Failed to find resource: IDR_DSA_PEM
Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Setting box Pinout ...
Selected pinout: GEN2 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2036 mV
CMD Active Level:2175 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1734.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
Done.
Checking security...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2033 mV
CMD Active Level:2231 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x0280800000 (48.167GB)
Read EXT file system info
Formatting EXT fs... (may take a while...)
mmc_write_blocks(0x35093F000 , 1000 ), Failed: Error: CARD Ready Timeout Error (URL_READY_TIMEOUT_ERR)
mmc_write_blocks(0x280800400 , 400 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
mmc_write_blocks(0x350945000 , 1000 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
Returned 5...
Blocks Reading Error (0x280800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Read EXT file system info
NEW Created filesystem with parameters:
Size: 51720978432
Block size: 51539611648
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Inodes: 3162112
Label:
Trying to mount file system...
Blocks Reading Error (0x280800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Shutting down EXT4...
Done.
Detected (Android Cache)) CACHE : 0x0270800000 (256.0MB)
Read EXT file system info
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Formatting EXT fs... (may take a while...)
mmc_write_blocks(0x278800000 , 400 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
mmc_write_blocks(0x278801000 , 1000 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
Returned 5...
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Read EXT file system info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Inodes: 16384
Label:
Trying to mount file system...
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Shutting down EXT4...
Done.
---------------------------------------------
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2049 mV
CMD Active Level:2232 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Short EXT fs info:
Size: 48.167GB
Block size: 4.0KB
Inode size: 256
Inodes: 3162112
Short userdata info:
Unable to read gesture.key, code 2
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2049 mV
CMD Active Level:2231 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Short EXT fs info:
Size: 48.167GB
Block size: 4.0KB
Inode size: 256
Inodes: 3162112
Short userdata info:
Unable to read gesture.key, code 2
Done.
Checking security...
Running: Format FRP Partition...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2053 mV
CMD Active Level:2232 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x0007508000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x0270800000 (256.0MB), formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0280800000 (48.167GB), formatting...
Done.
Done.
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2055 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
Done.
Checking security...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2056 mV
CMD Active Level:2183 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x0280800000 (48.167GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x0270800000 (256.0MB)
Erasing...
Done.
---------------------------------------------
Done.
Checking security...
Running: Format FRP Partition...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2053 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x0270800000 (256.0MB), formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0280800000 (48.167GB), formatting...
Done.
Done.
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2054 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1737.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
Done.
OS ver.: Windows 10 (build 19045), 64-bit edition. Admin rights OK
CrashSender library ver:1.4.0.3
Curl binary ver:7.56.1.0
EasyJTAG binary ver:3.8.0.15
EasyJTAG SPI Plugin ver:1.1.1.13
LibUSB Library ver:1.2.6.0
WinFSP SDK ver:1.12.22301.0
Hardware Version 2 presets initialized
Setting box Pinout ...
Box Drivers version: 10.0.19041.3636
Z3X Card Serial : AAFA-E280 , ver: 22
Z3X Card Activation [JTAGPLUS] : ACTIVATED
Z3X Card Activation [LG] : NOT ACTIVATED
Z3X Card Activation [SAMS] : NOT ACTIVATED
Z3X Card Activation [JTAG] : ACTIVATED
For more information press F1 to open local help or visit our wiki
Found 2 serial devices
COM1 ACPI\VEN_PNP&DEV_0501 Communications Port (COM1)
COM5 USB\VID_1781&PID_AAAC&REV_0100&MI_00 USB Serial Device (COM5)
Failed to find resource: IDR_DSA_PEM
Selected pinout: GEN2 High Speed Pinout
Change EasyJTAG Pinout OK
Setting box Pinout ...
Selected pinout: GEN2 ISP Pinout
Change EasyJTAG Pinout OK
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2036 mV
CMD Active Level:2175 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1734.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
Done.
Checking security...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2033 mV
CMD Active Level:2231 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x0280800000 (48.167GB)
Read EXT file system info
Formatting EXT fs... (may take a while...)
mmc_write_blocks(0x35093F000 , 1000 ), Failed: Error: CARD Ready Timeout Error (URL_READY_TIMEOUT_ERR)
mmc_write_blocks(0x280800400 , 400 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
mmc_write_blocks(0x350945000 , 1000 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
Returned 5...
Blocks Reading Error (0x280800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Read EXT file system info
NEW Created filesystem with parameters:
Size: 51720978432
Block size: 51539611648
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Inodes: 3162112
Label:
Trying to mount file system...
Blocks Reading Error (0x280800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Shutting down EXT4...
Done.
Detected (Android Cache)) CACHE : 0x0270800000 (256.0MB)
Read EXT file system info
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Formatting EXT fs... (may take a while...)
mmc_write_blocks(0x278800000 , 400 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
mmc_write_blocks(0x278801000 , 1000 ), Failed: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC)
Returned 5...
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Read EXT file system info
NEW Created filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Inodes: 16384
Label:
Trying to mount file system...
Blocks Reading Error (0x270800400 , 2 , Reason: Error: DATA RCV CRC Error (URL_DATA_RCV_CRC) )
Shutting down EXT4...
Done.
---------------------------------------------
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2049 mV
CMD Active Level:2232 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Short EXT fs info:
Size: 48.167GB
Block size: 4.0KB
Inode size: 256
Inodes: 3162112
Short userdata info:
Unable to read gesture.key, code 2
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2049 mV
CMD Active Level:2231 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Short EXT fs info:
Size: 48.167GB
Block size: 4.0KB
Inode size: 256
Inodes: 3162112
Short userdata info:
Unable to read gesture.key, code 2
Done.
Checking security...
Running: Format FRP Partition...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2053 mV
CMD Active Level:2232 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) FRP : 0x0007508000 (1.0MB) formatting...
Done.
Detected LINUX(Android) CACHE : 0x0270800000 (256.0MB), formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0280800000 (48.167GB), formatting...
Done.
Done.
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2055 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1736.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
Done.
Checking security...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2056 mV
CMD Active Level:2183 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected (Android Userdata) USERDATA : 0x0280800000 (48.167GB)
Erasing...
Done.
Detected (Android Cache)) CACHE : 0x0270800000 (256.0MB)
Erasing...
Done.
---------------------------------------------
Done.
Checking security...
Running: Format FRP Partition...
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2053 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB , 0x7480000 pages , 0xE90000000 bytes
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
Formatting FRP...
Detected LINUX(Android) CACHE : 0x0270800000 (256.0MB), formatting...
Done.
Detected LINUX(Android) USERDATA : 0x0280800000 (48.167GB), formatting...
Done.
Done.
Done.
Z3X EasyJtag Software ver. 3.8.0.15
Loading eMMC GEN2 Firmware... IO: 2400 mV
Box S/N: C9F5D8B7900EF73D, FW Ver.: 02.53
CMD Pullup Level: 2054 mV
CMD Active Level:2185 mV
Box I/O Level: 2400 mV
CLK Rate:24000 kHz
Bus Width:1bit,SDR
HiPower mode is off!
---------- eMMC Device Information ----------
eMMC CID: 9B01005930533036340088FA4A515BAD
eMMC CSD: D02701320F5903FFFFFFFFFF8A4040B3
eMMC Manufacturer ID: 009B, OEM ID: 0100
eMMC Date: 05/0360 Rev.0x0
eMMC Name: Y0S064, Serial No.: 2298104401
eMMC NAME (HEX): 593053303634
EMMC ROM1 (Main User Data) Capacity: 59648 MB
EMMC ROM2 (Boot Partition 1) Capacity: 4096 kB
EMMC ROM3 (Boot Partition 2) Capacity: 4096 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 16384 kB
EMMC RPMB is programmed and written 378 times
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
EMMC Password Locked: No
Extended CSD rev 1.8 (MMC 5.1)
Boot configuration \[PARTITION_CONFIG: 0x48\] Boot from:ROM2 (Boot Partition 1).
Boot bus config [177]: 0x02, width 8 bits, Partition config [179]: 0x48.
H/W reset function [RST_N_FUNCTION]: 0x01
High-capacity write protect group size [HC_WP_GRP_SIZE: 0x00008000]
Partitioning Support \[PARTITIONING_SUPPORT\]: 0x07
Device support partitioning feature
Device can have enhanced tech.
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00
---------------------------------------------
Backup saved: Y0S064_2298104401_20260618_1737.extcsd
Found valid GPT with protective MBR; using GPT.
Real (Hardware) Disk/Image size: 7480000 sectors 58.3 GiB
Soft (Partitioned) Disk/Image size: 747FFBC sectors 58.2 GiB
Disk identifier (GUID): 00000000-0000-0000-0000-000000000000
Logical sector size: 0x200 bytes ,First/Last usable sector: 34,122159070
Partition info successfully found
------ Android information ------
Detected LINUX(Android) system : 0x0050803400 (3.257GB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
------ Android information ------
Detected LINUX(Android) system_ext : 0x01ACB2D400 (327.382MB)
Unable to mount SYSTEM, code: 95
---------------------------------------------
Detected USERDATA USERDATA : 0x0280800000 (48.167GB)
Unable to mount USERDATA, code: 95
Userdata Superblock contents::
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ................................;
Done.