V071
Operation : Read FW [ v2.14 ]
V071
Operation : Read FW [ v2.14 ]
Operation : Read FW [ v2.14 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : 0x0002
FDL : Control transfered!
Boot Done!
Device info :
Patch Level : OPM2.171019.012
Display ID : W5001P-F3102-8.1-OP-V071-20210319
Ver. Incmt : OP-V071-20210319
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2021-03-05
Build Time : 19.03.2021
Product Model : itel W5001P
Product Brand : Itel
Product Name : F3102
Product Device : itel-W5001P
Product Manfct : itel
Product Info : F3102
Product Board : itel-W5001P
Board Platform : sp7731e
AndroidVer : 8
VlnrLevel : 0x00
SP7731E__itel__itel_W5001P__8.1.0__W5001P-F3102-8.1-OP-V071-20210319__OPM2.171019.012__F3102
Read : prodnv.img
ExtSparse : Compression ratio : 98%
Read : phase.cfg
Read : recovery.img
Read : tos.bin
Read : sml.bin
Read : u-boot.bin
Read : boot_logo.bmp
Read : fastboot_logo.bmp
Read : nvitem_w.bin
Make : persist.img
Read : gnssmodem.bin
Read : gnssbdmodem.bin
Read : modem_wcn.img
Read : modem_w.bin
Read : deltanv_w.bin
Read : gdsp_w.bin
Read : pm_sys.bin
Read : boot.img
Read : system.img
ExtSparse : Compression ratio : 86%
Make : cache.img
Read : vendor.img
ExtSparse : Compression ratio : 87%
Read : cover.bin
Read : vbmeta.img
Read : chargelogo.bin
Read : chargeremind.bin
Read : lkcharge.bin
Make : userdata.img
Read : u-boot-spl.bin
Firmware size : 0x77FC3C84 ( 1.87 GiB )
Android Info saved : _Android_info.txt
Reconnect Power/Cable!
Done!
Elapsed: 00:14:54