After Remove Huawei ID....your device won't work properly bescause the chip is damaged
Welcome to Octoplus Huawei Software v.1.2.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
Your balance: 150 credit(s)
2021-04-15 09:21:57 GMT -------------------------------------------------
Starting Connect
Selected phone model: WLZ-AN00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN990_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Writing BL2 partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Detected Android Sooner Single ADB Interface port
Device Model: WLZ-AN00
System: WLZ-AN00 11.0.0.165(C00E165R3P5)
FB Lock State: LOCKED
User Lock State: LOCKED
Connect done.
Performed by 1.2.5 Software version.
2021-04-15 09:23:25 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: WLZ-AN00
Username: cxYQKOIZma
Connecting to the credit server...
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: WLZ-AN00
System: WLZ-AN00 11.0.0.165(C00E165R3P5)
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.5 Software version.
Welcome to Octoplus Huawei Software v.1.2.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM1 Communications Port
Your balance: 150 credit(s)
2021-04-15 09:21:57 GMT -------------------------------------------------
Starting Connect
Selected phone model: WLZ-AN00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN990_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Writing BL2 partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found a fastboot device: 0123456789ABCDEF
Detected Android Sooner Single ADB Interface port
Device Model: WLZ-AN00
System: WLZ-AN00 11.0.0.165(C00E165R3P5)
FB Lock State: LOCKED
User Lock State: LOCKED
Connect done.
Performed by 1.2.5 Software version.
2021-04-15 09:23:25 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: WLZ-AN00
Username: cxYQKOIZma
Connecting to the credit server...
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: WLZ-AN00
System: WLZ-AN00 11.0.0.165(C00E165R3P5)
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.5 Software version.