World First Samsung M11 SM-M115F frp reset done by UMT

[goluinfotech]

Original samsung m11 frp reset done by umt

Here is log
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E17907D02EBABFA07EC
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8953_ddr.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...Failed
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1


Here is edl point picture

 

[goluinfotech]

Need special loader get it from combination firmware

 

[katuwalprem]

yes 100% work for me also

 

[killme12]

Not work for me ...i got the loader from combination and tried not work

 

[satish02]

Original samsung m11 frp reset done by umt

Here is log
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E17907D02EBABFA07EC
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8953_ddr.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...Failed
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1


Here is edl point picture

View attachment 21370

file link

 

[Prabesh gurung]

Original samsung m11 frp reset done by umt

Here is log
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM9)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A00900 [8953] 00002000
OPK_DATA : 412796CDA9753F93CE68BCC07BCC2D2B4FCA4F7D17CC3E17907D02EBABFA07EC
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8953_ddr.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8953, eMMC, 32 GB
LU Count : 1 [0x03A3E000]
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...Failed
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 6.1


Here is edl point picture

View attachment 21370

can we factory reset samsug qcm device usig edl mode . is it safe or not