UMT [15-02-24] UMTv2/UMTPro QcFire v9.3 - Samsung Unbrick, KG Bypass and more...

[GsmToto]

Device : Samsung Galaxy A52 (SM-A525F) BIT6
Operation : Samsung Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1901400 [SM6250] 00002000
OPK_DATA : 36E60270BD33E72EA2DE1D42607BFE83C90B16C4236EC83747 F7AE14535FB63Z
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A525F BIT6.ufl]
Preparing Loader...Done
Sending Loader [SM-A525F BIT6]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6250, UFS, 128 GB
LU Count : 6 [0x01DA3400] [0x00000800] [0x00000800] [0x00000400] [0x00025800] [0x00000800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Software : TP1A.220624.014.A525FXXS6DWK2, A525FXXS6DWK2 [Wed Nov 29 15:59:32 KST 2023]
Android Ver. : 13
Patch Level : 2023-12-01
Reset FRP... Done
Operation Finished.
QcFire Ver. 9.3

 

[rudra9797]

We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent


QcFire v9.3
The Ultimate Qualcomm Tool



Supported Functions
- Read / Write Firmware
- Backup / Restore QCN
- IMEI Repair in FTM/Diag + Flash Mode
- Backup / Reset / Restore Security (EFS)
- Reset FRP (Google Factory Reset Protection)
- Format UserData
- Read Pattern Lock (Android < 6.0, Un-Encrypted Devices Only)
- Reset Locks (PIN, Password, Pattern w/o Data Loss, Un-Encrypted Devices Only)
- Enable Diag (Need OEM Unlock, May not work on BL Locked Devices)
- Reboot to EDL from Fastboot
- Reset Mi Account for Xiaomi Devices
- Disable Mi Account for Xiaomi Devices
- Factory Reset (sideload Mode) for Xiaomi Devices
- Disable / Restore Locks for Encrypted Userdata
- Motorola Boot Repair
- Xiaomi EDL Locked Device Service
- Bootloader Unlock in EDL Mode for some Xiaomi Devices
- One Click Root in EDL Mode for Generic Qualcomm Devices
- Forensic Functions (Read Contacts / Messages in EDL Mode)
- One Click Lock Reset for Vivo Phones (Encrypted Userdata)
- Factory Method for Format FS
- EDL Authentication using Xiaomi Auth App (Service Account Required)
- Xiaomi Wipe EFS in Sideload Mode
- Xiaomi IMEI Repair for RSA Protected Phones
- Xiaomi Boot Loader Unlock
- Unique Method for Vivo Reset Locks for Protected Devices
- Xiaomi EDL Auth Using UMT Server
- Xiaomi Flashing in Fastboot Mode
- Nokia Factory Firmware (nb0) Direct Flashing in EDL mode
- Oppo OFP Firmware Exctration Added
- Xiaomi Free Auth Service (bypass).
- Mi Account Reset without Relock
- Mi Account Patch on Flashing (EDL/Fastboot)
- Samsung MDM Unlock in EDL Mode
- Huawei ID Reset
- Vivo Functions in Fastboot Mode
- Universal Huawei ID Reset
- Xiaomi Sideload Reset FRP/Mi Account
- Xiaomi Sideload Firmware Update
- Xiaomi Temporary BL Unlock
- Xiaomi Enable Diag (NO ROOT)
- Samsung Lost Mode Reset in EDL Mode
- Samsung KG Bypass - NEW!!!
- Samsung Unbrick / Dead Boot Repair - NEW!!!
- Samsung TAR to Unbrick Firmware Creator - NEW!!!

Added:


ASUS
- Rog Phone 6 Pro (AI2201_D)

BQ
- Aquaris X2

Huawei
- Nova Y90 (CTR-L22)

Lenovo
- Tab 2 (TB2-X30L)
- Tab M10 (TB-X605M)
- Tab M10 5G (TB-X607Z)
- Legion Y700
- Legion Y70 (L71091)

LG
- Q92 5G
- Velvet 5G
- Wing 5G

Meizu
- E3 (M851Q)

Motorola
- One Fusion Plus

Samsung
- Galaxy A23 5G (SM-A236E) BIT4
- Galaxy A52 5G (SM-A526U) BIT7
- Galaxy A70 (SM-A705X)
- Galaxy S20 FE (SM-G780G) BIT8
- Galaxy S20 FE 5G (SM-G781B) BIT7

TCL
- 10 Plus (T782H)

Vestel
- Venus Z20

ZTE
- nubia Red Magic 7S Pro (NX709S)




Added Samsung KG Bypass
- You can flash or downgrade to lower version with same BIT
- It will allow you to flash your phone even if flashing blocked due to KG/MDM
- This function is available in Samsung Special group

Added Samsung TAR to Unbrick Firmware Converter
- No need to extract/rename file one by one
- It will extract all required files in selected folder
- You can use this extracted in QcFire Flash Tab > Samsung Unbrick group to repair dead boot devices
- Always use same or higher BIT firmware for successfull unbrick operation

Added Samsung Unbrick Function
- It can unbrick devices even with completely erased flash and erase partition table
- Just select PIT file from Unbrick_Fw folder created by TAR to Unbrick Converter
- Tick ReCreate Partition Table only if partiton table is destroyed or fully erased

Some Minor Cosmetic Changes in GUI






CONNECTION METHOD:
Method to connect some Samsung Devices is already in Log.
For newer devices, do the following:
- Hold VOL UP + DOWN on Device.
- Hold Button on EDL Cable.
- Insert Cable to Device while holding EDL Cable Button.
- Now rapidly click both VOL UP + DOWN at the same time.
- Once you have clicked VOL UP + DOWN more than 3 times, leave EDL Cable Button but keep rapidly clicking VOL UP + DOWN.
- Stop clicking VOLUME Buttons once device is connected in EDL Mode.






Special thanks to all our users who helped us with their test reports.



Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.



It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...


SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 8 YEARS



WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.


ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.

WE CONDEMN USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.

STATUTORY WARNING - READ CAREFULLY
Using International Edition of our software is prohibited by Indian Law.
We strictly advice you to use Indian Edition if you are in India.
If you use International Edition in India, it may cause legal action against you by local law enforcement agencies.
We will not be liable for any loss or damaged caused.



How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors



PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED

Telegram

U.M.T (c) Official Support Chat


Br,
UMT
fake update by umt team

 

[GsmToto]

Device : Xiaomi Poco M3
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM2)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1D01400 [SDM662] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD3
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM662]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM662, UFS, 128 GB
LU Count : 6 [0x01CB9800] [0x00000800] [0x00000800] [0x00008000] [0x00100000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : Android-Q-build-20230330215157, V14.0.2.0.SJFMIXM [Thu Mar 30 21:57:40 CST 2023]
Android Ver. : 12
Patch Level : 2023-03-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 6526594846
Display ID : 47BR-A3CO-2RX7-VOG
Writing Data...Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Device : Xiaomi Redmi Note 8
Operation : Reset Mi Account (New)
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1A01000 [SDM665] 00007200
OPK_DATA : 4B60244704D721E5B96DD5BB7233886E38F2198FBDE6433FCE 1D25A7B0472DD7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SDM665]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SDM665, EMMC, 128 GB
LU Count : 4 [0x0E8F8000] [0x00002000] [0x00002000] [0x00008000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Xiaomi
Software : , V12.0.6.0.QCOMIXM [Sat Jul 24 13:53:24 WIB 2021]
Android Ver. : 10
Patch Level : 2021-07-01
Reading Data[1]...Done
Patching Data...Done
Writing Data...Done
Reading Data[2]...Done
Patching Data...Done
Account : 63167622197
Display ID : 435B-F3CJ-HBQR-Q6H
Writing Data...Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1901A00 [SM6375] 0300A406
OPK_DATA : 489DD7DE2DB26F5DBD1CDF921F54B949A93388CEAEE92B0E80 5882C469B2SAZ7
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [SM6375_001]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : SM6375, UFS, 128 GB
LU Count : 6 [0x01D7B800] [0x00000800] [0x00000800] [0x00000800] [0x0004B000] [0x00002800]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build :
Int. Build :
Resetting FRP Lock...Failed
Using Patch Method... Done
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Device : Samsung Galaxy S23 Ultra 5G (SM-S918B) U3
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SMS918B_U3.ufl]
Preparing Loader...Done
Sending Loader [SMS918B_U3]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : , UFS, 512 GB
LU Count : 6 [0x076FA000] [0x00001400] [0x00001400] [0x00002000] [0x00028000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [65536], Out: 16384, Sector Size: 4096
Reading Partition Table...OK
Reading Device Information...OK [Sign]
Build : S918BXXU3BWJM
Int. Build : SM-S918B_EUR_XX_QKEY1
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 9.3

 

[AhsanGsmLab]

SM-S918U BIT2 LOST MODE NOT WORKING AUTO LOADER NOT SUPPORTED
PLEASE FIX

 

[AhsanGsmLab]

Device : Samsung Galaxy S23 Ultra (SM-S918U) BIT2
Operation : Samsung Lost Mode Reset
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM12)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...Done
Protocol v3 or higher detected. Auto Loader unsupported.
Initializing Protocol...OK
Using Pre-Defined Loader [SM-S918U BIT2.ufl]
Preparing Loader...Done
Sending Loader [SM-S918U BIT2]...Done
Executing Loader...Failed! Possibly Wrong Loader
Please select Loader manually, or use Factory Loader in Custom Option.
Please use correct loader and check USB port / cable.
Operation Finished.
QcFire Ver. 9.3

 

[GsmToto]

Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM3)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Init Handshake Sequence...OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD 9722438E73A37D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Schok Schok Volt SV55 [SV55216]
Brand : Schok
Prod.Name : SV55216
Software : SV55216_01.02.06.231015, 231015 [Thu Nov 2 12:03:47 CST 2023]
Android Ver. : 11
Patch Level : 2023-11-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.4