Post Here Successfully Flashed Unlock Or IMEI Repair By Advance Box

maanarman · Nov 21, 2018

Nokia 105 Write Flash Done

Code:

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

******************************************************
                  TIME STARTS HERE                     
******************************************************


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: D:\NOKIA\RM-908\rm908_02.700

 Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00EAFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00210000~0x0039A33E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1614656 bytes
Data Checksum: 6B15
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_nai02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:01:54

******************************************************
    You must Factory Reset the phone to enable the     
   ringtones and other  customized settings to work   
******************************************************


 Waiting For Phone to go Online...

 5,  4,  3,  2,  1...
MCU: V 02.70 22-02-13 RM-908 (c) Nokia
IMEI: 358146058017327
Product Serial Number: 2019A40BH
Product Code         : 059R449
Module Code          : 0205453
Basic Production Code: 059Q858
PPM SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia IJ
ADSP Version         : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nij
MCU SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia
HW Version           : 1001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BEIHAIv82 ILI9163C
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Nov 28, 2018

Nokia X1 Remove Phone Lock Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 07.50 29-11-11 RM-713 (c) Nokia
IMEI: 352862054726267
Product Code         : 059D8V0
Module Code          : 0204727
Basic Production Code: 059N2M2
ADSP Version         : p V 07.50\n29-11-11\nRM-713\n(c) NMP\nij
MCU SW Version       : V 07.50 29-11-11 RM-713 (c) Nokia
HW Version           : 3103
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv91 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM713_059G444_05.44_001.vpl
======================================================
Variant Details     : NDT MEA IJ PK URDU RED
Software Version : 05.44
Product Type       : RM-713
Product Code      : 059G444
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Nov 29, 2018

Nokia 105 Write Flash Done

Code:

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

******************************************************
                  TIME STARTS HERE                     
******************************************************


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: D:\NOKIA\RM-908\rm908_02.700

 Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00EAFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00210000~0x0039A33E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1614656 bytes
Data Checksum: 6B15
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_nai02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:01:54

******************************************************
    You must Factory Reset the phone to enable the     
   ringtones and other  customized settings to work   
******************************************************


 Waiting For Phone to go Online...

 5,  4,  3,  2,  1...
MCU: V 02.70 22-02-13 RM-908 (c) Nokia
IMEI: 358986059705333
Product Serial Number: 33D11B1BH
Product Code         : 059R4B8
Module Code          : 0205453
Basic Production Code: 059T865
PPM SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia IJ
ADSP Version         : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nij
MCU SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia
HW Version           : 1001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BEIHAIv82 ILI9163C
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 5, 2018

Nokia 1616 Remove Phone Lock Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.20 01-12-10 RH-125 (c) Nokia
IMEI: 357379040302546
Product Serial Number: 17E0690AH
Product Code         : 0588620
Module Code          : 0204373
Basic Production Code: 059F8R0
PPM SW Version       : V 06.20 01-12-10 RH-125 (c) Nokia IA
ADSP Version         : p V 06.20\n01-12-10\nRH-125\n(c) NMP\nia
MCU SW Version       : V 06.20 01-12-10 RH-125 (c) Nokia
HW Version           : 3007
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 107 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 02.90 22-10-13 RM-961 (c) Nokia
IMEI: 357151063844302
Product Serial Number: 4F9429BAU
Product Code         : 059T2B9
Module Code          : 0205726
Basic Production Code: 059S7H7
PPM SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia IA
ADSP Version         : p V 02.90\n22-10-13\nRM-961\n(c) NMP\nia
MCU SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia
HW Version           : 3001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : TINAMA:BARACOAv8E NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 103 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.51 13-05-11 RM-647 (c) Nokia
IMEI: 352404057360834
Product Serial Number: 81E14A0AH
Product Code         : 0592303
Module Code          : 0204496
Basic Production Code: 059J889
PPM SW Version       : V 06.51 13-05-11 RM-647 (c) Nokia IA
ADSP Version         : p V 06.51\n13-05-11\nRM-647\n(c) NMP\nia
MCU SW Version       : V 06.51 13-05-11 RM-647 (c) Nokia
HW Version           : 1004
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : INLX:SERIv81 NT7542
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM647_0592303_07.00_001.vpl
======================================================
Variant Details     : CTR MEA IA BLACK URDU MEA4
Software Version : 07.00
Product Type       : RM-647
Product Code      : 0592303
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 107 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 02.70 08-08-13 RM-961 (c) Nokia
IMEI: 358994058265887
Product Serial Number: 41F9BF1BH
Product Code         : 059T2C1
Module Code          : 0205709
Basic Production Code: 059S7H5
PPM SW Version       : V 02.70 08-08-13 RM-961 (c) Nokia IJ
ADSP Version         : p V 02.70\n08-08-13\nRM-961\n(c) NMP\nij
MCU SW Version       : V 02.70 08-08-13 RM-961 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 101 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.25 25-08-11 RM-769 (c) Nokia
IMEI: 359070041851965
Product Serial Number: 4888618AH
Product Code         : 059G7N6
Module Code          : 0204883
Basic Production Code: 059F6L6
PPM SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia IJ
ADSP Version         : p V 06.25\n25-08-11\nRM-769\n(c) NMP\nij
MCU SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM769_059G7N2_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IA P_BLACK ARABIC BH
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N2
Variant Version    : 001


======================================================
Selected VPL File:
RM769_059G7N6_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IJ P_BLACK URDU PK
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N6
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 105 Write Flash Done

Code:

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

******************************************************
                  TIME STARTS HERE                     
******************************************************


Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: D:\NOKIA\RM-908\rm908_02.700

 Data Block Found...
Number of Sections: 03
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 03
IMAGE Erase Block: 0x00800000~0x00A0FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2162688 bytes
Data Checksum: 0551
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 02 of 03
IMAGE Erase Block: 0x00C60000~0x00EAFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 2232896 bytes
Data Checksum: 89F6
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
 Processing Section 03 of 03
IMAGE Erase Block: 0x00FFC000~0x00FFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 64 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00210000~0x0039A33E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1614656 bytes
Data Checksum: 6B15
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Processing Image File: D:\NOKIA\RM-908\rm908_nai02.70ij

 Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
 Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...


Exit Flash Mode Done...
Time Elapse : 00:02:01

******************************************************
    You must Factory Reset the phone to enable the     
   ringtones and other  customized settings to work   
******************************************************


 Waiting For Phone to go Online...

 5,  4,  3,  2,  1...
MCU: V 02.70 22-02-13 RM-908 (c) Nokia
IMEI: 358134055041904
Product Serial Number: 17C6BEDBH
Product Code         : 059R449
Module Code          : 0205456
Basic Production Code: 059Q858
PPM SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia IJ
ADSP Version         : p V 02.70\n22-02-13\nRM-908\n(c) NMP\nij
MCU SW Version       : V 02.70 22-02-13 RM-908 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : CMI:BEIHAIv01 ILI9163C
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 101 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.25 25-08-11 RM-769 (c) Nokia
IMEI: 359299045119505
Product Serial Number: 5837B73AH
Product Code         : 059G7Q6
Module Code          : 0204883
Basic Production Code: 059F6L6
PPM SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia IJ
ADSP Version         : p V 06.25\n25-08-11\nRM-769\n(c) NMP\nij
MCU SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM769_059G7N2_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IA P_BLACK ARABIC BH
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N2
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 100 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 03.25 16-09-11 RH-130 (c) Nokia
IMEI: 357918040397129
Product Serial Number: 4D2293FAH
Product Code         : 059H2W5
Module Code          : 0204875
Basic Production Code: 059F6X3
PPM SW Version       : V 03.25 16-09-11 RH-130 (c) Nokia IL
ADSP Version         : p V 03.25\n16-09-11\nRH-130\n(c) NMP\nil
MCU SW Version       : V 03.25 16-09-11 RH-130 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RH130_059L4T4_04.40_001.vpl
======================================================
Variant Details     : NDT EURO ER F_PINK HEBREW IL
Software Version : 04.40
Product Type       : RH-130
Product Code      : 059L4T4
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 105 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 03.40 08-08-13 RM-908 (c) Nokia
IMEI: 359580057741512
Product Serial Number: 421543BBH
Product Code         : 059R449
Module Code          : 0205453
Basic Production Code: 059T865
PPM SW Version       : V 03.40 08-08-13 RM-908 (c) Nokia IJ
ADSP Version         : p V 03.40\n08-08-13\nRM-908\n(c) NMP\nij
MCU SW Version       : V 03.40 08-08-13 RM-908 (c) Nokia
HW Version           : 1001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : TIANMA:BEIHAIv88 ST7735R2
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM908_059R449_02.70_001.vpl
======================================================
Variant Details     : NDT MEA FARSI IR [ATF v10.50]
Software Version : 02.70
Product Type       : RM-908
Product Code      : 059R449
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 6, 2018

Nokia 101 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.25 25-08-11 RM-769 (c) Nokia
IMEI: 359754042919224
Product Serial Number: 6E97AFCAH
Product Code         : 059G7N6
Module Code          : 0204883
Basic Production Code: 059F6L6
PPM SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia IJ
ADSP Version         : p V 06.25\n25-08-11\nRM-769\n(c) NMP\nij
MCU SW Version       : V 06.25 25-08-11 RM-769 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM769_059G7N2_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IA P_BLACK ARABIC BH
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N2
Variant Version    : 001


======================================================
Selected VPL File:
RM769_059G7N6_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IJ P_BLACK URDU PK
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N6
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 7, 2018

Nokia 107 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 02.90 22-10-13 RM-961 (c) Nokia
IMEI: 353034065256481
Product Serial Number: FB99FD4BI
Product Code         : 059T2B9
Module Code          : 0205726
Basic Production Code: 059S7H7
PPM SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia IA
ADSP Version         : p V 02.90\n22-10-13\nRM-961\n(c) NMP\nia
MCU SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia
HW Version           : 2700
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 8, 2018

Nokia 107 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 02.90 22-10-13 RM-961 (c) Nokia
IMEI: 352359063054922
Product Serial Number: 54F5B63BH
Product Code         : 059T2C1
Module Code          : 0205726
Basic Production Code: 059S7H7
PPM SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia IJ
ADSP Version         : p V 02.90\n22-10-13\nRM-961\n(c) NMP\nij
MCU SW Version       : V 02.90 22-10-13 RM-961 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 9, 2018

Nokia 103 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 06.51 13-05-11 RM-647 (c) Nokia
IMEI: 359047040298174
Product Serial Number: 4377070AH
Product Code         : 0592303
Module Code          : 0204496
Basic Production Code: 059J889
PPM SW Version       : V 06.51 13-05-11 RM-647 (c) Nokia IA
ADSP Version         : p V 06.51\n13-05-11\nRM-647\n(c) NMP\nia
MCU SW Version       : V 06.51 13-05-11 RM-647 (c) Nokia
HW Version           : 1003
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : INLX:SERIv91 NT7542
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM647_0592303_07.00_001.vpl
======================================================
Variant Details     : CTR MEA IA BLACK URDU MEA4
Software Version : 07.00
Product Type       : RM-647
Product Code      : 0592303
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 11, 2018

Nokia 103 Phone lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 05.80 06-08-10 RM-647 (c) Nokia
IMEI: 355956048817146
Product Serial Number: DXY191292
Product Code         : 0592303
Module Code          : 0204496
Basic Production Code: 059C7H2
PPM SW Version       : V 05.80 06-08-10 RM-647 (c) Nokia IA
ADSP Version         : p V 05.80\n06-08-10\nRM-647\n(c) NMP\nia
MCU SW Version       : V 05.80 06-08-10 RM-647 (c) Nokia
HW Version           : 1001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : INLX:SERIv91 NT7542
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM647_0592303_07.00_001.vpl
======================================================
Variant Details     : CTR MEA IA BLACK URDU MEA4
Software Version : 07.00
Product Type       : RM-647
Product Code      : 0592303
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 19, 2018

Nokia 101 RM-769 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 07.70 18-10-12 RM-769 (c) Nokia
IMEI: 357917054949809
Product Serial Number: 1405FB6BH
Product Code         : 059P7L1
Module Code          : 0204883
Basic Production Code: 059S217
PPM SW Version       : V 07.70 18-10-12 RM-769 (c) Nokia IJ
ADSP Version         : p V 07.70\n18-10-12\nRM-769\n(c) NMP\nij
MCU SW Version       : V 07.70 18-10-12 RM-769 (c) Nokia
HW Version           : 1001
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RM769_059G7N2_06.65_001.vpl
======================================================
Variant Details     : NDT MEA IA P_BLACK ARABIC BH
Software Version : 06.65
Product Type       : RM-769
Product Code      : 059G7N2
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 27, 2018

Nokia 101 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 04.10 06-08-12 RH-130 (c) Nokia
IMEI: 355195050376580
Product Serial Number: CF0EDAEAH
Product Code         : 059H2J9
Module Code          : 0204875
Basic Production Code: 059Q6R2
PPM SW Version       : V 04.10 06-08-12 RH-130 (c) Nokia IJ
ADSP Version         : p V 04.10\n06-08-12\nRH-130\n(c) NMP\nij
MCU SW Version       : V 04.10 06-08-12 RH-130 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : SDI:BOHAIv94 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000040002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


======================================================
Selected VPL File:
RH130_059L4T4_04.40_001.vpl
======================================================
Variant Details     : NDT EURO ER F_PINK HEBREW IL
Software Version : 04.40
Product Type       : RH-130
Product Code      : 059L4T4
Variant Version    : 001


FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Dec 30, 2018

Nokia 1800 Phone Lock Remove Done

Code:

 Make sure that you plugged the cable to the
 RJ-45 Port Marked << EXTENSION >>

   =======================================
  ||  FLASHBUS                EXTENSION  ||
  ||   =======                 =======   ||
  ||  |       |               |\     /|  ||
  ||  |       |  (O) (O) (O)  | CABLE |  ||
  ||  |       |               |/     \|  ||
  ||   =======                 =======   ||
  ||                                     ||
   =======================================

                                ^ ^ ^
                                | | |
                                | | |
                               PLUG IN
                              CABLE HERE

MCU: V 04.10 24-04-10 RM-653 (c) Nokia
IMEI: 352709046830154
Product Serial Number: HAP308636
Product Code         : 0594924
Module Code          : 0204566
Basic Production Code: 0591994
PPM SW Version       : V 04.10 24-04-10 RM-653 (c) Nokia MF
ADSP Version         : p V 04.10\n24-04-10\nRM-653\n(c) NMP\nmf
MCU SW Version       : V 04.10 24-04-10 RM-653 (c) Nokia
HW Version           : 1000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv93 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

Post Here Successfully Flashed Unlock Or IMEI Repair By Advance Box

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster

No Life Poster