UFI ISP ADAPTER VCC, VCCQ, Voltage Problem Solved

[Abdullah]

UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.


There are 2 version of UFI ISP Adapter available in the market


if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.

Please login to view image

I hope it will work fine after these modifications.

Please login to view image

Best Regards
Only Press Thanks Button

 

[Tanveerm506]

hello team i buy new ufi box and i face the problem with isp adapter i try to connect with 15 phones even 2 phones on but not success please team can u guide me what is the problem and i also remove diod and capcitor and make jumper but not success

 

[GSM KING MAKER]

hello team i buy new ufi box and i face the problem with isp adapter i try to connect with 15 phones even 2 phones on but not success please team can u guide me what is the problem and i also remove diod and capcitor and make jumper but not success

New Box Come With UFI ISP Adapter V2 So No Need Any Modifications !
Maybe You Face Any Problem Post With Adapter & UFI Logs Screenshot For We Better Help You

 

[zameer3021]

same problem with adapter isp v2

UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.

View attachment 2901

There are 2 version of UFI ISP Adapter available in the market

View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.

View attachment 2899

I hope it will work fine after these modifications.

View attachment 2902

Best Regards
Only Press Thanks Button

 

[waqas_ali6012003]

Zameer bro csn u post screen short of ufi software .

Sent From SM-N950F Using Martview Forum App

 

[iunlock]

i got my ufi box today on my isp adapter its written V2 but from backside of this its same as V1 shows in the picture

 

[ibrahimalrahi]

UFI ISP PIN ADAPTER VCC, VCCQ, Voltage Problem Return Code 17, 20, Solved
Failed to initialize eMMC (return code: 20, CMD Error: Invalid responce) !!!!
CMD1 error, cmd response: 0x0, card state:255 (Card is in unknown stat
SEND_OP_COND Command failed.

View attachment 2901

There are 2 version of UFI ISP Adapter available in the market

View attachment 2897

if you have UFI ISP Adapter V2 I hope its working fine.
But if you have UFI ISP Adapter V1 you need some modifications for it to work fine.

View attachment 2899

I hope it will work fine after these modifications.

View attachment 2902

Best Regards
Only Press Thanks Button

Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!! CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state) SEND_OP_COND command failed


how to solve it? please

 

[nour2017]

i got my ufi box today on my isp adapter its written V2 but from backside of this its same as V1 shows in the picture

did u solve ur problem bro?

 

[saifulinbox]

I have v2 ISP Adapter but

Redmi note 5 pro

Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 20, CMD Error: Invalid response) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---


PLZ give best solution

 

[anantkhg]

Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed

 

[vicky927]

Failed to initialize eMMC (return code: 6, CMD Error: Invalid Voltage Range) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed

SAME ISSUE I TO GET
I TOO DID'NT FOUND SOLUTION

 

[gsm joy]

Connection status: EHCI:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Boot version: 1.04, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---


help me solution

 

[siddiquealexander]

Bro i have v2 adapter but same error
Not connect any phone

 

[foneworld07]

hi i m also facing same problem, ordered new box 2day . but not connecting on working phone

 

[foneworld07]

Connection status: EHCI:HUB:HUB:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-3924
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x40FF8080, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Card might be DEAD, for OLD moviNAND(Samsung) eMMC you may update the firmware with TestPoint ! ---

 

[Jeremmi]

Do not suffer, buy a separate adapter with the extra power...and be happy

 

[Jane1]

Use a charging cable when using ISP. It helped me

 

[All TECH 4 You]

Do not suffer, buy a separate adapter with the extra power...and be happy

But This Adapter Not Available In INDIA If Any Have Please Tell Me Here I AM Ready For Buy This Adapter

Thanks & Regards By:All TECH 4 You

 

[Jeremmi]

But This Adapter Not Available In INDIA If Any Have Please Tell Me Here I AM Ready For Buy This Adapter

Thanks & Regards By:All TECH 4 You

For Russia, it is also not available, produced and sold in Indonesia...I negotiated with seller and bought with transshipment on a map you can watch site (not want write worded, and he can be banned...not advertised, just the thing is really good)

 

[chitranshgi]

same problem after modify isp pinout adaptor