Huawei P40 Lite 5G CDY-NX9B CDY-NX9A Huawei Nova 7 Se Kirin820 Write Cert Repair IMEI Done

Abdullah Ali

Moderator
Mar 30, 2020
3,417
10,424
Pakistan Gujrat
Sonork ID
0

Huawei P40 Lite 5G CDY-NX9B CDY-NX9A Huawei Nova 7 Se Kirin820 Write Cert Repair IMEI Done With Chimera Tool


Chimera Mobile Phone Utility version: 29.90.1720 @ 2021-10-12

Printing phone history


Write Cert
10/12/2021
9:15
AM


Gathering information...

Device Model: CDY-NX9A
Current software version: CDY-N09 10.1.1.256(C316E7R1P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 3744mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: vodacom/za
Base version: CDY-LGRP2-OVS 10.1.1.256
Cust version: CDY-N09-CUST 10.1.1.7(C316)
Preload version: CDY-N09-PRELOAD 10.1.1.1(C316R1)
Finished at local time: [10.12.21 11:28:09]
WorkID: 153987465



Huawei P40 Lite 5G CDY-NX9B CDY-NX9A Huawei Nova 7 Se Kirin820 Write Cert​

Chimera Mobile Phone Utility version: 29.90.1720 @ 2021-10-12​

Writing certificate...​

Validating certificate files​

Validating E:/EFT/Chimera Read Cert 86818804XXXX​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files
Flashing ERECOVERY files
Failed to flash the eRecovery file, falling back to manual reboot.

Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data​

Servicing the phone​

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Uploading certificate file from E:/EFT/Chimera Read Cert 86818804XXXX
Finished at local time: [10.12.21 11:25:13]
WorkID: 153986068
 
Last edited:

ChimeraTool

Product Manager
Apr 6, 2021
1,317
669
Slovakia

Huawei P40 Lite 5G CDY-NX9B CDY-NX9A Huawei Nova 7 Se Kirin820 Write Cert Repair IMEI Done With Chimera Tool​


Chimera Mobile Phone Utility version: 29.90.1720 @ 2021-10-12

Printing phone history


Write Cert
10/12/2021
9:15
AM


Gathering information...

Device Model: CDY-NX9A
Current software version: CDY-N09 10.1.1.256(C316E7R1P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 3744mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: vodacom/za
Base version: CDY-LGRP2-OVS 10.1.1.256
Cust version: CDY-N09-CUST 10.1.1.7(C316)
Preload version: CDY-N09-PRELOAD 10.1.1.1(C316R1)
Finished at local time: [10.12.21 11:28:09]
WorkID: 153987465



Huawei P40 Lite 5G CDY-NX9B CDY-NX9A Huawei Nova 7 Se Kirin820 Write Cert​

Chimera Mobile Phone Utility version: 29.90.1720 @ 2021-10-12​

Writing certificate...​

Validating certificate files​

Validating E:/EFT/Chimera Read Cert 86818804XXXX​

Rebooting phone to factory mode​

Changing to factory mode​

Rebooting phone to USB update mode​

Downloading ERECOVERY files
Flashing ERECOVERY files
Failed to flash the eRecovery file, falling back to manual reboot.

Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data​

Servicing the phone​

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.
Uploading certificate file from E:/EFT/Chimera Read Cert 86818804XXXX
Finished at local time: [10.12.21 11:25:13]
WorkID: 153986068
Dear User,

Thank you for the positive feedback once again!

Best regards
Sab
Chimera Team
 
  • Like
Reactions: Abdullah Ali

Abdullah Ali

Moderator
Mar 30, 2020
3,417
10,424
Pakistan Gujrat
Sonork ID
0

Huawei P40 Lite 5G CDY-NX9A Kirin820 Write Cert Repair IMEI Done

Chimera Mobile Phone Utility version: 29.96.0955 @ 2021-10-15

Gathering information...

Device Model: CDY-NX9A
Current software version: CDY-N09 10.1.1.256(C316E7R1P1)

Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 4134mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: vodacom/za
Base version: CDY-LGRP2-OVS 10.1.1.256
Cust version: CDY-N09-CUST 10.1.1.7(C316)
Preload version: CDY-N09-PRELOAD 10.1.1.1(C316R1)
Finished at local time: [10.15.21 10:33:36]
WorkID: 154386473

Huawei P40 Lite 5G Kirin820 Write Cert Repair IMEI Done

Chimera Mobile Phone Utility version: 29.96.0955 @ 2021-10-15

Printing phone history


Get Info
10/15/2021
8:31
AM

Writing certificate...

Validating certificate files

Validating E:/EFT/Chimera Read Cert/CDY-NX9A_Group_1_Slot_1_868188046XXXXX.imei.

Rebooting phone to factory mode

Changing to factory mode

Rebooting phone to USB update mode

Downloading ERECOVERY files

Flashing ERECOVERY files

Failed to flash the eRecovery file, falling back to manual reboot.
Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data

Servicing the phone

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.

Uploading certificate file from E:/EFT/Chimera Read Cert/CDY-NX9A_Group_1_Slot_1_868188046XXXXX.imei.
Finished at local time: [10.15.21 10:45:36]
WorkID: 154386511
 

ChimeraTool

Product Manager
Apr 6, 2021
1,317
669
Slovakia


Huawei P40 Lite 5G CDY-NX9A Kirin820 Write Cert Repair IMEI Done

Chimera Mobile Phone Utility version: 29.96.0955 @ 2021-10-15

Gathering information...

Device Model: CDY-NX9A
Current software version: CDY-N09 10.1.1.256(C316E7R1P1)

Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 4134mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: vodacom/za
Base version: CDY-LGRP2-OVS 10.1.1.256
Cust version: CDY-N09-CUST 10.1.1.7(C316)
Preload version: CDY-N09-PRELOAD 10.1.1.1(C316R1)
Finished at local time: [10.15.21 10:33:36]
WorkID: 154386473


Huawei P40 Lite 5G Kirin820 Write Cert Repair IMEI Done

Chimera Mobile Phone Utility version: 29.96.0955 @ 2021-10-15

Printing phone history


Get Info
10/15/2021
8:31
AM

Writing certificate...

Validating certificate files

Validating E:/EFT/Chimera Read Cert/CDY-NX9A_Group_1_Slot_1_868188046XXXXX.imei.

Rebooting phone to factory mode

Changing to factory mode

Rebooting phone to USB update mode

Downloading ERECOVERY files

Flashing ERECOVERY files

Failed to flash the eRecovery file, falling back to manual reboot.
Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.

Uploading data

Servicing the phone

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The OEMINFO PSID seems to be invalid.

Uploading certificate file from E:/EFT/Chimera Read Cert/CDY-NX9A_Group_1_Slot_1_868188046XXXXX.imei.
Finished at local time: [10.15.21 10:45:36]
WorkID: 154386511
Dear User,

Excellent! Just excellent, thank you for the report!

Best regards
Sab
Chimera Team
 
  • Like
Reactions: Abdullah Ali

Dinislam12

Active Member
Jan 28, 2021
26
8
South africa
FB unlocked: YES
Battery voltage: -
Phone model: ANA-NX9
Build number: ANA-N29 11.0.0.195(C185E7R4P4)
Vendor/Country: hw/meafnaf
System version: Skipped
Android version: 10
Base version: ANA-LGRP4-OVS 11.0.0.195
Custom version: ANA-N29-CUST 11.0.0.7(C185)


Thank you for feedback I can write certificate file
I can do it also certificate file
But Huawei id is not opening ...? Please I need solution????
 

ChimeraTool

Product Manager
Apr 6, 2021
1,317
669
Slovakia
FB unlocked: YES
Battery voltage: -
Phone model: ANA-NX9
Build number: ANA-N29 11.0.0.195(C185E7R4P4)
Vendor/Country: hw/meafnaf
System version: Skipped
Android version: 10
Base version: ANA-LGRP4-OVS 11.0.0.195
Custom version: ANA-N29-CUST 11.0.0.7(C185)


Thank you for feedback I can write certificate file
I can do it also certificate file
But Huawei id is not opening ...? Please I need solution????
Dear User,

After the ID remove process, please do a Factory reset on the device. Then check the ID lock. The factory reset is vital for the Id remove.

Best regards
Sab
Chimera team
 
  • Like
Reactions: Abdullah Ali

ChimeraTool

Product Manager
Apr 6, 2021
1,317
669
Slovakia
Dear User,

The service can be reached in the Software, so you have to run the tool on the PC and connect the device to it.
However, we do not collect/store cert files on our server, so we cannot provide that, but you can download various cert files from the Easy-Firmware website or from the Halabtech.

Best regards
Sab
Chimera team
 

ChimeraTool

Product Manager
Apr 6, 2021
1,317
669
Slovakia
CDY-NX9A certificate plzzzz
Dear User,

We do not have Cert files on our server at the moment, but we do support the READ CERT service for that phone. So if you have another device with a good network, you can read out the CERT from it and then place it on the damaged device with the WRITE CERT.

Best regards
Sab
Chimera team
 
Top