UFi samsung J200h Device is already partitioned how to problem solve

UFi Box & Dongle

omtbsl

Active Member
Sep 6, 2020
16
0
bangladesh
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
eMMC 5.x Health report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
eMMC selected: [HYNIX] H9TQ64AAETACUR/8GB (BGA221)

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 7.28 GiB(7,818,182,656 bytes)

Writing eMMC partition settings...
Device is already partitioned

how to way tow time partition the device
 

Altamashsodha

Active Member
Jun 19, 2020
93
28
India
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
eMMC 5.x Health report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
eMMC selected: [HYNIX] H9TQ64AAETACUR/8GB (BGA221)

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 7.28 GiB(7,818,182,656 bytes)

Writing eMMC partition settings...
Device is already partitioned

how to way tow time partition the device
try to reprogram emmc update emmc fimware
 

aftab_ansari5287

Super Moderator
Aug 16, 2019
2,415
3,204
INDIA
Skype
aftab_ansari5287
PayPal:

Donate money to this user
Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Authentication Key not yet programmed]
User area: 7.28 GiB(7,818,182,656 bytes)
Cache size: 1 MiB
Partition configuration: 0x78
Boot acknowledge is sent during the boot operation
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
eMMC 5.x Health report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): 0% - 10% device life time used
eMMC selected: [HYNIX] H9TQ64AAETACUR/8GB (BGA221)

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-5573
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 24MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: H8G4t (0x483847347421), rev: 0x01, serial number: 0x0236752E
Manufacturing date: Sep 2016
CID: 90014A48 38473474 21010236 752E9330
CSD: D07F0132 0F5903FF FFFFFFEF 8A400012
EXT_CSD revision: 1.7 (MMC v5.0, v5.01)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB
User area: 7.28 GiB(7,818,182,656 bytes)

Writing eMMC partition settings...
Device is already partitioned

how to way tow time partition the device
If the emmc is from samsung then try updating the emmc firmware.
Note-Emmc Repartation can be done only once.you can change emmc
 
Top