DTPro more samsung direct frp done

DTPro Tool
Status
Not open for further replies.

j3soft

Active Member
Sep 5, 2019
33
6
  • A022m direct frp done by DTPRO

1638905567789.png

Operation : Samsung Direct Frp erase
MTK Flash/AMAT Client

Preloader - Status: Waiting for PreLoader VCOM, please connect mobile

Port - Device detected :)
Preloader - CPU: MT6739/MT6731()
Preloader - HW version: 0x0
Preloader - WDT: 0x10007000
Preloader - Uart: 0x11002000
Preloader - Brom payload addr: 0x100a00
Preloader - DA payload addr: 0x201000
Preloader - CQ_DMA addr: 0x10212000
Preloader - Var1: 0xb4
Preloader - Disabling Watchdog...
Preloader - HW code: 0x699
Preloader - Target config: 0xe5
Preloader - SBC enabled: True
Preloader - SLA enabled: False
Preloader - DAA enabled: True
Preloader - SWJTAG enabled: True
Preloader - EPP_PARAM at 0x600 after EMMC_BOOT/SDMMC_BOOT: False
Preloader - Root cert required: False
Preloader - Mem read auth: True
Preloader - Mem write auth: True
Preloader - Cmd 0xC8 blocked: True

Preloader - HW subcode: 0x8a00
Preloader - HW Ver: 0xca00
Preloader - SW Ver: 0x0
Preloader - ME_ID: 2D1B8642D1941D5216F764568F4600F4
Preloader - SOC_ID: BAAFDDC8AD4C5773A62899B7E2F77FF71794C769AFCCA7B2C343BBC9ABD31EC2

DTpro - Loading payload from mt6739_payload.bin, 0x264 bytes
DTpro - Authorization / Service
Kamakiri - Writing Keys...
Kamakiri - Authorizing the device Ok...
DTpro - Successfully sent payload: C:\A0_box\DT PRO TOOLS\on line update\MEDIATEK_v3.0.0.9099New\File\mtkclient\payloads\mt6739_payload.bin
Port - Device detected :)
Main - Device is protected.
Main - Device is in BROM mode. Trying to dump preloader.
Successfully extracted preloader for this device to: C:\A0_box\DT PRO TOOLS\on line update\MEDIATEK_v3.0.0.9099New\File\mtkclient\Loader\Preloader\preloader_k39tv1_bsp_titan_hamster.bin
DAXFlash - Uploading stage 1 from MTK_AllInOne_DA_5.1420.bin
DAXFlash - Successfully uploaded stage 1, jumping ..
Preloader - Jumping to 0x200000
Preloader - Jumping to 0x200000: ok.

DAXFlash - Successfully received DA sync
DAXFlash - Sending emi data ...

DAXFlash - Sending emi data succeeded.
DAXFlash - Uploading stage 2...

DAXFlash - Successfully uploaded stage 2
DAXFlash - EMMC FWVer: 0x0
DAXFlash - EMMC ID: GX6BAB
DAXFlash - EMMC CID: 150100475836424142003307e4fc3861
DAXFlash - EMMC Boot1 Size: 0x400000
DAXFlash - EMMC Boot2 Size: 0x400000
DAXFlash - EMMC GP1 Size: 0x0
DAXFlash - EMMC GP2 Size: 0x0
DAXFlash - EMMC GP3 Size: 0x0
DAXFlash - EMMC GP4 Size: 0x0
DAXFlash - EMMC RPMB Size: 0x1000000
DAXFlash - EMMC USER Size: 0x747c00000
DAXFlash - DA-CODE : 0x999F0

DAXFlash - DA Extensions successfully added

DAXFlash - Wiping addr 0x1159a000 with length 0x80000, please wait....
DAXFlash - Successsfully Wiped addr 0x1159a000 with length 524288.
Wiped sector 568528 with sector count 1024.

Mediatek Conection | done!
 

DTPRO Tool

Product Manager
Sep 3, 2018
4,501
3,953
Skype
nico_2202
how to conect the phone?brom mode dont work by this method,i done with PM method...

No work what?

#please check Videos and Steps!
Lately we have the forum full of spam but nobody posts the errors (Screenshot + log) please if you are going to post! post tests and we will see where the error is.

phone must be connected in Brom! some need testpoint! you must have usb lib installed ...


Please this is easy, you just have to check the Sticky post, many users have reported satisfactory processes, we recommend not moving the SOC's Mode OPTION ....
 

carlos_zyk

Active Member
Jun 27, 2019
50
2
No work what?

#please check Videos and Steps!
Lately we have the forum full of spam but nobody posts the errors (Screenshot + log) please if you are going to post! post tests and we will see where the error is.

phone must be connected in Brom! some need testpoint! you must have usb lib installed ...


Please this is easy, you just have to check the Sticky post, many users have reported satisfactory processes, we recommend not moving the SOC's Mode OPTION ....
one click not work
i know what i am doing
i done frp with PM method by TP,and one click frp even detec the phone
SM-A022F
 

carlos_zyk

Active Member
Jun 27, 2019
50
2
No work what?

#please check Videos and Steps!
Lately we have the forum full of spam but nobody posts the errors (Screenshot + log) please if you are going to post! post tests and we will see where the error is.

phone must be connected in Brom! some need testpoint! you must have usb lib installed ...


Please this is easy, you just have to check the Sticky post, many users have reported satisfactory processes, we recommend not moving the SOC's Mode OPTION ....
and RSA frp erase dont work,log says frp done but phone still lock (i didn't copy the log),then i use PM method to solved frp
 
Status
Not open for further replies.
Top