Oppo A5 CPH1809 after factery reset phone dead

sharrymz

Active Member
May 23, 2017
48
7
UAE
oppo A5 factory reset and frp done but mobile didnot power on connect usb cable to pc no port show. power supply current press power 7 to 12 volts again 0


Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-xxxx-xxxx
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0xD5F4CEC3
Manufacturing date: May 2018
CID: 15010052 4436344D 4201D5F4 CEC3554C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: PBBM00
brand: OPPO, model: PBBM00(R11s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (PBBM00EX_11_A.18)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20181119.203539 release-keys

Internal storage: 23.69 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMRD60004M-BXXX/32G
 

winaung786

Friend's Martview
Jul 19, 2017
187
125
GSM MARKET
Skype
mgwinaung123
Oppo A5 no need ISP pinout u can remove by MRT with test point brother.

Sent from my MI 6 using Tapatalk
 

cellbhai

Friend's Martview
Sep 26, 2018
345
113
Short clk and switch on mobile
oppo A5 factory reset and frp done but mobile didnot power on connect usb cable to pc no port show. power supply current press power 7 to 12 volts again 0


Connection status: EHCI:HUB:HUB:USB 2.0 High-Speed
Interface: UFI High-Speed
Serial number: 0011-xxxx-xxxx
Boot version: 1.04, FW version: 1.12 (Jun 7 2018 00:06:47)
Insertion test... Done.
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: RD64MB (0x524436344d42), rev: 0x01, serial number: 0xD5F4CEC3
Manufacturing date: May 2018
CID: 15010052 4436344D 4201D5F4 CEC3554C
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 29.12 GiB(31,268,536,320 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked

ANDROID System Info:
platform: msm8953, cpu abi: arm64-v8a
manufacturer: OPPO
board: msm8953, name: PBBM00
brand: OPPO, model: PBBM00(R11s)
build id: OPM1.171019.026, version: 8.1.0 Oreo (PBBM00EX_11_A.18)
build description: S88051AA1-user 8.1.0 OPM1.171019.026 eng.root.20181119.203539 release-keys

Internal storage: 23.69 GiB
crypto state: unencrypted
Custom moviNAND command is not supported for this device(MMC51).
Detected: SAMSUNG moviNAND KMRD60004M-BXXX/32G

Sent From vivo 1907 Using Martview Forum App
 

Thanos_92

Friend's Martview
Oct 25, 2018
131
136
Oppo A5 no need ISP pinout u can remove by MRT with test point brother.

Sent from my MI 6 using Tapatalk

no you cant bcoz Oppo A5 have Snapdragon cpu not mtk.and other model oppo A5s is MTk which can be done by metamode format by MRT/UMT etc.
 
  • Like
Reactions: winaung786

Hrahman

Junior Member
Sep 5, 2019
2
1
oppo a5 (1809) ufi box factory reset phone dead. then i write Ext Csd ,& short clk jummper phone not on.what can i do now ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
 

bhuvanele

Member
Apr 5, 2017
14
6
india
oppo a5 (1809) ufi box factory reset phone dead. then i write Ext Csd ,& short clk jummper phone not on.what can i do now ??????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
bro post ufi identify log, then only somebody can help with software issue
 
Top