real me c2 hang on logo after formet same by ae tool and show recover mode on realme logo whats solution
i have ufi box
i have ufi box
If You Have Any Problem Using UFI Box Or Any Problem Recover Set Post Here
- Thread starter Deepesh Sharma
- Start date
bootloader took credit for unlock but still locked
04-01-2020 16:04 XF05951063203 XIAOMI_FL beryllium 4f193e34 4 1 1 159.146.41.186
04-01-2020 16:04 XF05951063203 XIAOMI_FL beryllium 4f193e34 4 1 1 159.146.41.186
solimanbadsha
Member
- Dec 16, 2019
- 5
- 0
Hi UFI Team Im New User of Ufi Service tool , I faced A problem, I have 2 sony c5 ultra E5533. 1 set complete Running. 1 set hang logo and flash failed , then i check emmc ic, i looked is not better. then i changed emmc ic, and partitioned many time many way, and writed full file half file but set Not run and flash failed Sony flash tool, I have full and complete (dump and full partition data) backup file, A same model sony c5 ultra E5533 good running set,s**
Please Help Any expert.. How can I do how to following Rules,,,, thanks all forum members I Attached Tex log Some Pic,,
Please Help Any expert.. How can I do how to following Rules,,,, thanks all forum members I Attached Tex log Some Pic,,
Attachments
Redmi note 8 pro remove mi account error please help ufi team
Attachments
-
Capture.PNGnote 8 pro.PNG
Hello brother is there any help just face it UFI - eMMC ToolBox Don't open
The rest of the programs run normally
The rest of the programs run normally
Attachments
-
Screenshot_40.png -
Screenshot_41.png
I've been trying to authenticate for days and it always gives me the same error. What I can do?
AUTH info: MTK, version: 1
Firmware package: Redmi 6A MTK FRP+Mi BY+KaaL_RuDRA
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12020/01/14 10:58:05, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM12)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Sorry, We have run out of all available slots, please try again in -20 seconds.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SLA error. code 0x7046
(boot_rom.cpp, line:1279)
How can i fix this error??
I also have this problem and i want it to be fixed badly!
just bought ufi dongle and credit for this and now this happened for me.... please fix it !!
Firmware package: Redmi 6A MTK FRP+Mi BY+KaaL_RuDRA
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12020/01/14 10:58:05, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM12)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Sorry, We have run out of all available slots, please try again in -20 seconds.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SLA error. code 0x7046
(boot_rom.cpp, line:1279)
How can i fix this error??
I also have this problem and i want it to be fixed badly!
just bought ufi dongle and credit for this and now this happened for me.... please fix it !!
AUTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12020/01/16 10:28:26, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM11)
Connection status: EHCI:HUB:HUB:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Sorry, We have run out of all available slots, please try again in -635 seconds.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SLA error. code 0x7046
(boot_rom.cpp, line:1279)
So it 's been a week, how long will it last? So I lose clients.
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA[0].bin
hash: c8fa00811a246c975e865b14121d0f527fe674a2, size: 542.12 KiB
version: 3.3001.2018/04/12020/01/16 10:28:26, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM11)
Connection status: EHCI:HUB:HUB:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
[SERVER] Sorry, We have run out of all available slots, please try again in -635 seconds.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
Error: -1073348603 (STATUS_BROM_CMD_FAIL)
BROM_SCMD_SLA error. code 0x7046
(boot_rom.cpp, line:1279)
So it 's been a week, how long will it last? So I lose clients.
162 -FBGA all time problem
UFi Box || Failed to initialize eMMC (return code: 226, Over current detected) !!!
solution plz...................
its isp driect. i driect ufi box bga 162 adapter this error my error same.
solution plz
UFi Box || Failed to initialize eMMC (return code: 226, Over current detected) !!!
solution plz...................
its isp driect. i driect ufi box bga 162 adapter this error my error same.
solution plz
Firmware package: grus_global_images_V11.0.4.0.PFBMIXM_20191023.0000.00_9.0_global
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: HS-USB Diagnostics 9008 (COM12)
Connection status: IUSB3HUB:USB 2.00 High-Speed
USB Driver: [Mobile] qcusbser, version: 2.1.2.2, date: 1-20-2017
Initializing...
MSM Serial number: 0x366ef164
MSM HW ID: 0x001080e1
OEM Public Key Hash: 0xc924a35f39ce1cdd1b8d5a9f3b8e3c51317930431d7a9dd5a55028cf6965fe65
SBL SW version: 1
Firehose: prog_emmc_firehose_sdm710_ddr[1].elf
hash: cf455ad5450e8d13c8931e6a4881a29c7428617d, size: 705.52 KiB
QC_IMAGE_VERSION: BOOT.XF.2.1-00089-SDM710LZB-1
IMAGE_VARIANT: SDM670LA
OEM_IMAGE_VERSION: c3-bsp-builder-job004.bj
Sending firehose loader... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Aug 24 2018 20:05:37
INFO: Chip serial num: 913240420 (0x366ef164)
Sending configurations...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] Sorry, We have run out of all available slots, please try again in -28 seconds.
please fix this every time i try flash but no result
Scanning for Qualcomm HS-USB QDLoader 9008 device...
Download Port: HS-USB Diagnostics 9008 (COM12)
Connection status: IUSB3HUB:USB 2.00 High-Speed
USB Driver: [Mobile] qcusbser, version: 2.1.2.2, date: 1-20-2017
Initializing...
MSM Serial number: 0x366ef164
MSM HW ID: 0x001080e1
OEM Public Key Hash: 0xc924a35f39ce1cdd1b8d5a9f3b8e3c51317930431d7a9dd5a55028cf6965fe65
SBL SW version: 1
Firehose: prog_emmc_firehose_sdm710_ddr[1].elf
hash: cf455ad5450e8d13c8931e6a4881a29c7428617d, size: 705.52 KiB
QC_IMAGE_VERSION: BOOT.XF.2.1-00089-SDM710LZB-1
IMAGE_VARIANT: SDM670LA
OEM_IMAGE_VERSION: c3-bsp-builder-job004.bj
Sending firehose loader... Done
Handshaking...
Sending ping... Done
INFO: Binary build date: Aug 24 2018 20:05:37
INFO: Chip serial num: 913240420 (0x366ef164)
Sending configurations...
ERROR: Only nop and sig tag can be recevied before authentication.
[SERVER] Sorry, We have run out of all available slots, please try again in -28 seconds.
please fix this every time i try flash but no result
Attachments
-
Untitled.png
my ufi box is not working isp pinout
Attachments
-
IMG20200119115619.jpg -
IMG20200119154044.jpg
Sir i am new in this section please help me i try to realme rmx1805 to reset its pattern lock with ufi accentdantly i fectory erase emmc not mobile dead in 9008 port please tell me what to do now
hi
i do flash Redmi 6a with Auth CRDT
flash error and lose CRDT
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus_ru,500c6cbb8882397c] cost: 0, retry: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 512 MiB
SOC ID: 500c6cbb8882397c89d3b027fcfdaf91fa386236b70f111611462eb94e272e90
ME ID: 0c5ca10bb53577ef11ad0fe6c8a700da
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x01, serial number: 0x6DB4E4DF
Manufacturing date: Oct 2018
CID: 15010051 4436334D 42016DB4 E4DFA521
Capacity: 29.14 GiB(31,293,702,144 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (key exist)
User area: 29.12 GiB(31,268,536,320 bytes)
USB speed: High-Speed
Verifying SoC: passed
Verifying CID: passed
Writing recovery, size: 64 MiB
Error: -1073414141 (STATUS_DOWNLOAD_EXCEPTION)
Error while flashing images at 0x00000000 !!!
i do flash Redmi 6a with Auth CRDT
flash error and lose CRDT
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus_ru,500c6cbb8882397c] cost: 0, retry: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure ver: 0x00, BL ver: 0x00
Secure config: 0x00
SRAM size: 256 KiB
DRAM size: 512 MiB
SOC ID: 500c6cbb8882397c89d3b027fcfdaf91fa386236b70f111611462eb94e272e90
ME ID: 0c5ca10bb53577ef11ad0fe6c8a700da
Storage type: eMMC
Card/BGA: BGA (Discrete embedded)
Manufacturer ID: 0x15 (Samsung)
Product name: QD63MB (0x514436334d42), rev: 0x01, serial number: 0x6DB4E4DF
Manufacturing date: Oct 2018
CID: 15010051 4436334D 42016DB4 E4DFA521
Capacity: 29.14 GiB(31,293,702,144 bytes)
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 16384 KiB (key exist)
User area: 29.12 GiB(31,268,536,320 bytes)
USB speed: High-Speed
Verifying SoC: passed
Verifying CID: passed
Writing recovery, size: 64 MiB
Error: -1073414141 (STATUS_DOWNLOAD_EXCEPTION)
Error while flashing images at 0x00000000 !!!
IMRAN BAGBAN
Friend's Martview
- Oct 4, 2018
- 110
- 116
- Skype
- 786
UTH info: MTK, version: 1
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: e3960c2be7627956e03c11dd24ee726da8ffb92b, size: 13.37 MiB
version: 3.3001.2019-04-22020/02/04 00:37:35, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM5)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,aeaa0805c9a0fec0] ref id: XF04597493563, cost: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure config: 0x00
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
send DA data error. code 0x7024
(boot_rom.cpp, line:328)
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.
BROM version[1]: 7.1917.3.0
DownloadAgent: MTK_AllInOne_DA.bin
hash: e3960c2be7627956e03c11dd24ee726da8ffb92b, size: 13.37 MiB
version: 3.3001.2019-04-22020/02/04 00:37:35, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port... Done
Detected [BootROM] MediaTek USB Port (COM5)
Connection status: XHCI:HUB3:USB 2.00 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2016
Connecting Bootrom...
[SERVER] XIAOMI_FL [cactus,aeaa0805c9a0fec0] ref id: XF04597493563, cost: 3, your balance: 4
Sending Download Agent...
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Secure config: 0x00
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
[H/W] Fail to download DA to baseband chip's internal SRAM!
There's a cable communication problem or target might be shutdown unexpectedly or target lost power supply
Error: -1073348605 (STATUS_BROM_CMD_SEND_DA_FAIL)
send DA data error. code 0x7024
(boot_rom.cpp, line:328)
You have used 1 available XIAOMI_FL slot for this phone, you have 2 FREE slot left to try again in case this task fails.
You may retry the task for more times without further authorization as long as you don't unplug the USB cable, change brand or model selection or close the application.