Z3X Post here successfully Unlocked / Repaired / Flashed Phones with Pandora Tool

[saharsoft]

Realme C25Y RMX3265 FRP BYPASS ONE CLICK BY PANDORA TOOL​

Selected model: Realme RMX3265 (Realme C25Y)
Operation: Erase FRP
Software version: 8.9
Work ID: 73102188

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM72
Port: USB\VID_1782&PID_4D00\6&25A71A4&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T610_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 00216F611C01293310NA07PP
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3265
Product Name : RMX3265
Product Device : RE54D1
Product Board : ums512
Board Platform : ums512
Build ID : RP1A.201005.001
Build Date : Tue Oct 10 16:15:39 CST 2023
Display ID : RMX3265_11_A.54
Security Patch : 2023-10-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1696925887000
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[saharsoft]

Redmi note 11 spes frp bypass done with test point



Selected model: Xiaomi Redmi Note 11 (Spes)
Operation: Erase FRP
Software version: 9.0
Work ID: 74452428

Waiting for device... OK
Device found at COM18
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3419777851
Sahara ver: 2
OEM PK HASH: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Xiaomi
MSM HW ID: 001B80E100720000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: FAAA26A045EA467A0DBC89CD533C49C1484F9057
Loader PK hash: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Bypass EDL auth... OK
Detecting memory type... OK [UFS]
Storage info:
Type: UFS
Name:
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x1C45800000 (113.09Gb)
LU1 size: 0x0000800000 (8.00Mb)
LU2 size: 0x0000800000 (8.00Mb)
LU3 size: 0x0002000000 (32.00Mb)
LU4 size: 0x0180000000 (6.00Gb)
LU5 size: 0x0002000000 (32.00Mb)
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : qti
Product Manufacturer : QUALCOMM
Product Model : missi system image for arm64
Product Name : missi
Product Device : missi
Product Board : spes
Board Platform : bengal
Build ID : TKQ1.221114.001
Build Date : Sun Sep 29 03:23:13 UTC 2024
Security Patch : 2024-10-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V816.0.8.0.TGCMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Enabled
Erase FRP... OK
Done!

 

[saharsoft]

Vivo PD2103CF (Vivo Y53s) complete flash with DM verify error fix with Pandora Tool​

Selected model: Vivo PD2103CF (Vivo Y53s)
Operation: Flash (Format all + download)
Software version: 9.0
Work ID: 75648558

Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xB75E9DDE, 0x9EC9042E, 0xC1DF8EAB, 0xF62E4830
Get Chip ID... [MT6768]
Get SOC ID... [DB124F3C0F39C64D8CF5FEEFB1B9042F696103993E33EAB4219A33FE7262BF3C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47314331324C1011A63AE738C5
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1C12L
EMMC_ID : 0x13014E47314331324C1011A63AE738C5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2058
Product Name : 2058N
Product Device : 2058
Product Board : k69v1_64
Board Platform : mt6768
Build ID : SP1A.210812.003
Build Date : Thu May 12 16:09:14 CST 2022
Display ID : SP1A.210812.003 release-keys
Security Patch : 2022-05-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler05121614
Userdata FS Type : F2FS
Creating autoformat settings... OK
Format "EMMC_BOOT_1" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_BOOT_2" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_USER" partition( 0x00000000..0x1D1EFFFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK "preloder_backup"... OK
Download "recovery"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "reserved"... OK
Download "vbmeta_oem"... OK
Download "vbmeta_vgc"... OK
Download "efuse"... OK
Download "logo"... OK
Download "md1img"... OK
Download "md1img_1"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "gz1"... OK
Download "gz2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "super"... OK
Download "cache"... OK
Download "userdata"... OK
Flashing done!

 

[saharsoft]

Oppo A9 2020 CPH1937 frp bypass one click​

 

[saharsoft]

Samsung A03 Core A032f Frp Bypass one click | test point

 

[saharsoft]

Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Erase FRP
Software version: 9.3
Work ID: 88094882

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM22 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM22 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF0F9FD99, 0xCE821FE6, 0x85CF6BBF, 0xAA2575EE
Get Chip ID... [MT6761]
Get SOC ID... [BBD8BD9E74EC26D211DC482E3D9B74E01B111E1A682E4423E06A34AA36BDE69E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68423861503E01C265CA9AC6ED
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x90014A68423861503E01C265CA9AC6ED
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... error(3)
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Huawei_MRD-LX1F%20(Huawei%20Y6%20Pime)/FRP_BACKUP_(2025-9-3_13-17-37)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Samsung SM-E426S (Samsung Galaxy F42 5G)
Operation: Erase FRP
Software version: 9.4
Work ID: 88631344

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM35 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM35 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x89D53BCF, 0x3D40CA0C, 0xFF4A9660, 0xC6096258
Get Chip ID... [MT6833]
Get SOC ID... [2BD9148D313FAE75D39FB6C3480754DEF5E1A13C8814EDA7DD15AB8F61E14BE5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100335636434D4200B00A6A4268C9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CMB
EMMC_ID : 0x150100335636434D4200B00A6A4268C9
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-E426S
Product Name : f42xskt
Product Device : f42x
Product Board : f42x
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Mon Aug 11 10:31:02 KST 2025
Display ID : TP1A.220624.014.E426SKSS9DYG2
Security Patch : 2025-06-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : E426SKSS9DYG2
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-E426S%20(Samsung%20Galaxy%20F42%205G)/FRP_BACKUP_(2025-9-7_10-10-21)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Xiaomi Redmi A3 (Blue)
Operation: Erase FRP
Software version: 9.4
Work ID: 88661123

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5EF5D9DD, 0x11A29730, 0xE14CC4E7, 0x8301BE0C
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: C09F00
EMMC_ID : 0xD62D0043303946303051266557E02BDD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D25D80000 (116.59Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : blue
Product Name : blue_global
Product Device : blue
Product Board : blue
Board Platform : mt6765
Build ID : AP3A.240905.015.A2
Build Date : Fri Jun 27 17:11:17 CST 2025
Display ID : 15 V816.0.7.0.VGRMIXM
Security Patch : 2025-06-01
Version SDK : 35
Version Release : 15
Version Codename : REL
Firmware Version : V816.0.7.0.VGRMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Disabled
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A3%20(Blue)/FRP_BACKUP_(2025-9-7_15-25-48)/
Format FRP... [P1] OK
Erase FRP done!

 

[saharsoft]

Honor JDY-LX1 (Honor X6b 4G) frp bypass one click

Selected model: Honor JDY-LX1 (Honor X6b 4G)
Operation: Erase FRP
Software version: 9.6
Work ID: 91537390

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000000]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5E521992, 0x21ADBD80, 0xDE8CD594, 0x4188D4FC
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: Y0S256
EMMC_ID : 0x9B0100593053323536005DD62DA29A55
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x3A3E000000 (232.97Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : HONOR
Product Manufacturer : alps
Product Model : k69v1_64_k419
Product Name : vnd_k69v1_64_k419
Product Device : HNJDY-M1
Product Board : JDYL
Board Platform : mt6768
Build ID : SKQ1.210908.001
Build Date : Fri Apr 12 18:36:05 CST 2024
Display ID : System 8.0.0(1OX9)
Security Patch : 2024-04-01
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : eng.root.20240412.172320
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Honor_JDY-LX1%20(Honor%20X6b%204G)/FRP_BACKUP_(2025-9-29_12-48-0)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Vivo V2026 (Vivo Y12S)
Operation: Erase FRP
Software version: 9.6
Work ID: 91553152

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM88 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x210498B8, 0x7B76C219, 0x6C49CB34, 0x6DFC52E7
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DH6DAB
EMMC_ID : 0x1501004448364441420296D6CC6E1897
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 40% - 50% device life time used
DeviceLifeTimeEstB: 40% - 50% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2026
Product Name : 2026
Product Device : 2026
Product Board : k65v1_64_bsp
Board Platform : mt6765
Build ID : RP1A.200720.012
Build Date : Mon Oct 21 18:12:11 CST 2024
Display ID : RP1A.200720.012 release-keys
Security Patch : 2023-05-01
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : eng.compil.20241021.181531
Userdata FS Type : EXT4
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Vivo_V2026%20(Vivo%20Y12S)/FRP_BACKUP_(2025-9-29_14-47-2)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Realme RMX3231 (Realme C11 2021)
Operation: Erase FRP
Software version: 9.7
Work ID: 92485156

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM177
Port: USB\VID_1782&PID_4D00\6&25963C02&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: SC9863A_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 0002716R51000CA6
Read partitions info... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3231
Product Name : RMX3231BA
Product Device : RMX3231
Product Board : RMX3231
Board Platform : sp9863a
Build ID : RP1A.201005.001
Build Date : Wed May 18 17:19:27 CST 2022
Display ID : RMX3231_11.A.75
Security Patch : 2022-04-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 327
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[saharsoft]

Samsung SM-A065F (Galaxy A06) android 15 frp bypass​

Selected model: Samsung SM-A065F (Galaxy A06)
Operation: Erase FRP
Software version: 9.7
Work ID: 92519889

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM88 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5FEE7EEC, 0x30E1D206, 0x70E52CF6, 0x837921FB
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [8]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DC6DMB
EMMC_ID : 0x150100444336444D4200F6B4F223AB99
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-A065F
Product Name : a06xx
Product Device : a06
Build ID : AP3A.240905.015.A2
Build Date : Mon Jul 21 11:29:20 KST 2025
Firmware Version : A065FXXS5BYG6
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A065F%20(Galaxy%20A06)/FRP_BACKUP_(2025-10-7_15-21-0)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: OPPO CPH1803 (Oppo A3s)
Operation: Factory Reset
Software version: 9.7
Work ID: 92613706

Waiting for device... OK
Device found at COM145
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 330946846
Sahara ver: 2
OEM PK HASH:
CPU: SDM450 (Snapdragon 450)
Vendor: Qualcomm
MSM HW ID: 0009A0E100000000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: DB8C779E32D25DE13A77A53A672F0F929BE15480
Loader PK hash: 2440693284962AE0DC5F8534D2E131C3252C1C42F8E89019B9F1B4188731CA6F
Loader version: 3.21
Sending loader... OK
FireHose initialization... OK
Detecting memory type... OK [EMMC]
Storage info:
Type: EMMC
Name:
Page size: 200
Block size: 20000
Partition count: 2
PART0 size: 0x0E8F800000 (58.24Gb)
PART1 size: 0x0000400000 (4.00Mb)
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : OPPO
Product Manufacturer : OPPO
Product Model : OPPO A5
Product Name : PBAM00
Product Device : PBAM00
Product Board : msm8953
Board Platform : msm8953
Build ID : OPM1.171019.026
Build Date : Wed Jul 22 22:30:35 CST 2020
Display ID : PBAM00_11_A.30
Security Patch : 2020-08-05
Version SDK : 27
Version Release : 8.1.0
Version Codename : REL
Firmware Version : 1595428235
Userdata FS Type : EXT4
Factory reset data... OK
Done!

 

[msjabar]

Selected model: TCL T509 (TCL 505)
Operation: Erase FRP
Software version: 9.6
Work ID: 91521032

Connect phone in BROM Mode
Waiting for device... canceled


Selected model: TCL T509 (TCL 505)
Operation: Erase FRP And Wipe
Software version: 9.6
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? NO

Selected model: TCL T509 (TCL 505)
Operation: Erase FRP
Software version: 9.6
Work ID: 91521189

Connect phone in BROM Mode
Waiting for device... timeout


Selected model: TCL T509 (TCL 505)
Operation: Wipe Data
Software version: 9.6
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? NO

Selected model: TCL T509 (TCL 505)
Operation: Erase FRP
Software version: 9.6
Work ID: 91522323

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Brom disabled by Efuse[0x10F]


Selected model: TCL T509 (TCL 505)
Operation: Erase FRP
Software version: 9.6
Work ID: 91522419

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM (Android),usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM10 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x33A5338A, 0xCE323035, 0x4B6978FA, 0xAC0ED963
Get hw mode... OK
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: DI4128
EMMC_ID : 0x45010044493431323811123B59773B11
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : TCL
Product Manufacturer : alps
Product Model : mssi_64_ww
Product Board : ant
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Fri Oct 25 21:00:49 CST 2024
Display ID : UP1A.231005.007
Security Patch : 2024-10-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : BLC4
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/TCL_T509%20(TCL%20505)/FRP_BACKUP_(2025-9-29_15-56-25)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Infinix X6531B (Infinix Hot 50i)
Operation: Erase FRP
Software version: 9.7
Work ID: 92626343

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM88 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xD47C32A1, 0x178EA202, 0x9A0C6CBE, 0x39D0CD25
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARJ41X
EMMC_ID : 0xF4012241524A34315811A6B2926FBBCB
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1CD0000000 (115.25Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EROFS] ... OK
Product Brand : Infinix
Product Manufacturer : INFINIX
Product Model : Infinix X6531
Product Name : X6531-OP-C2
Product Device : Infinix-X6531
Product Board : Infinix-X6531
Board Platform : mt6768
Build ID : SP1A.210812.016
Build Date : Sun Oct 13 02:29:21 CST 2024
Display ID : INFINIX-U-64-241012V355
Security Patch : 2024-09-05
Version SDK : 34
Version Release : 14
Version Codename : REL
Firmware Version : 241013V33
Userdata FS Type : F2FS
Switch to BROM
Read partition "preloader"... OK
Read partition "preloader_backup"... OK
Parse scatter file... OK
Load Rom Images... OK
Erasing preloaders:
Format "preloader" partition... OK
Format "preloader_backup" partition... OK
Connect phone in BROM Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xD47C32A1, 0x178EA202, 0x9A0C6CBE, 0x39D0CD25
Get Chip ID... [MT6768]
Get SOC ID... [4C918EF72925AE0319C9A6DE1481A8C954A9EB111B55C09A239DD26A4324C52A]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xF4012241524A34315811A6B2926FBBCB
Load EMI from file... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: ARJ41X
EMMC_ID : 0xF4012241524A34315811A6B2926FBBCB
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1CD0000000 (115.25Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Restore parts:
Write file "preloader_x6531_v631.bin"... OK
Write file "preloader_x6531_v631_backup.bin"... OK
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Infinix_X6531B%20(Infinix%20Hot%2050i)/FRP_BACKUP_(2025-10-8_12-0-18)/
Format FRP... [P1] OK
Writting FRP data... OK
Fix TOOL DL Image error... OK
Erase FRP done!

 

[saharsoft]

Selected model: Vivo PD1901B (Vivo Y12)
Operation: Wipe Data
Software version: 9.7
There is a risk of data loss.
This procedure will erase all User Data
Make sure that you have a backup created. Continue? YES
Work ID: 92657826

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0xC51C42C0, 0x3483BDB8, 0xFE10337A, 0xA314C387
Load DownloadAgent... OK
Search DA... OK [2]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send preloader... OK
Load DownloadAgent... OK
Search DA... OK [7]
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: GP6BMB
EMMC_ID : 0x150100475036424D4201F7CA68638695
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0E8F800000 (58.24Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x00C0000000 (3.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 30% - 40% device life time used
DeviceLifeTimeEstB: 30% - 40% device life time used
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM not disabled
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : vivo 1901
Product Name : PD1901BF_EX
Product Device : PD1901BF_EX
Product Board : k62v1_64_bsp
Board Platform : MTK6765
Build ID : PPR1.180610.011
Build Date : Fri Dec 11 18:11:20 CST 2020
Display ID : PPR1.180610.011 release-keys
Security Patch : 2020-11-01
Version SDK : 28
Version Release : 9
Version Codename : REL
Firmware Version : compiler12111801
Userdata FS Type : EXT4
Formatting "userdata" partition... [P1] OK
Formatting "cache" partition... [P1] OK
Formatting "metadata" partition... [P1] OK
Wipe data done!