Z3X Post here successfully Unlocked / Repaired / Flashed Phones with Pandora Tool

[saharsoft]

Realme C25Y RMX3265 FRP BYPASS ONE CLICK BY PANDORA TOOL​

Selected model: Realme RMX3265 (Realme C25Y)
Operation: Erase FRP
Software version: 8.9
Work ID: 73102188

Connect phone in BROM mode. Use volume key buttons or testpoint.
Waiting for device... OK
Device found at COM72
Port: USB\VID_1782&PID_4D00\6&25A71A4&0&4
Driver: [UNISOC Communications Inc.,sprdvcom,SPRD U2S Diag,sprdvcom.sys,4.19.38.134]
Port type: BROM
Connecting to device... OK
Selected processor: Tiger_T610_64
Load files... (universal) OK
Connect preloader 1... OK
Connect preloader 2... OK
Connect loader 1... OK
Connect loader 2... OK
Serial Number: 00216F611C01293310NA07PP
Read partitions info... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : realme
Product Manufacturer : realme
Product Model : RMX3265
Product Name : RMX3265
Product Device : RE54D1
Product Board : ums512
Board Platform : ums512
Build ID : RP1A.201005.001
Build Date : Tue Oct 10 16:15:39 CST 2023
Display ID : RMX3265_11_A.54
Security Patch : 2023-10-05
Version SDK : 30
Version Release : 11
Version Codename : REL
Firmware Version : 1696925887000
Userdata FS Type : F2FS
Backup partitions... OK
Formatting "persist" partition... OK
Done!

 

[saharsoft]

Redmi note 11 spes frp bypass done with test point



Selected model: Xiaomi Redmi Note 11 (Spes)
Operation: Erase FRP
Software version: 9.0
Work ID: 74452428

Waiting for device... OK
Device found at COM18
Port: Qualcomm HS-USB QDLoader 9008
Open port... OK
Reading device info... OK
Serial Number: 3419777851
Sahara ver: 2
OEM PK HASH: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
CPU: SM6225 (Snapdragon 680 4G)
Vendor: Xiaomi
MSM HW ID: 001B80E100720000
SBL SW Ver: 00000000
Prepare loader file... downloading... OK
Loader hash: FAAA26A045EA467A0DBC89CD533C49C1484F9057
Loader PK hash: 1BEBE3863A6781DB4B01086063007334DE9E5CA14971C7C4F4358EC9D79CDA4692CE5E948C6FD409408F4C919FCADFE3
Loader version: 6.5
Sending loader... OK
FireHose initialization... OK
Bypass EDL auth... OK
Detecting memory type... OK [UFS]
Storage info:
Type: UFS
Name:
Page size: 1000
Block size: 1000
Partition count: 6
LU0 size: 0x1C45800000 (113.09Gb)
LU1 size: 0x0000800000 (8.00Mb)
LU2 size: 0x0000800000 (8.00Mb)
LU3 size: 0x0002000000 (32.00Mb)
LU4 size: 0x0180000000 (6.00Gb)
LU5 size: 0x0002000000 (32.00Mb)
Read partitions info from phone... OK
Checking A/B state... OK [A]
Read product info... [EXT4] ... OK
Product Brand : qti
Product Manufacturer : QUALCOMM
Product Model : missi system image for arm64
Product Name : missi
Product Device : missi
Product Board : spes
Board Platform : bengal
Build ID : TKQ1.221114.001
Build Date : Sun Sep 29 03:23:13 UTC 2024
Security Patch : 2024-10-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : V816.0.8.0.TGCMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Enabled
Erase FRP... OK
Done!

 

[saharsoft]

Vivo PD2103CF (Vivo Y53s) complete flash with DM verify error fix with Pandora Tool​

Selected model: Vivo PD2103CF (Vivo Y53s)
Operation: Flash (Format all + download)
Software version: 9.0
Work ID: 75648558

Parse scatter file... OK
Load Rom Images... OK
Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM135 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0707
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6768]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xB75E9DDE, 0x9EC9042E, 0xC1DF8EAB, 0xF62E4830
Get Chip ID... [MT6768]
Get SOC ID... [DB124F3C0F39C64D8CF5FEEFB1B9042F696103993E33EAB4219A33FE7262BF3C]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [8]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x13014E47314331324C1011A63AE738C5
Load EMI config from preloader... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: G1C12L
EMMC_ID : 0x13014E47314331324C1011A63AE738C5
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 10% - 20% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Get scatter info... OK
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : vivo
Product Manufacturer : vivo
Product Model : V2058
Product Name : 2058N
Product Device : 2058
Product Board : k69v1_64
Board Platform : mt6768
Build ID : SP1A.210812.003
Build Date : Thu May 12 16:09:14 CST 2022
Display ID : SP1A.210812.003 release-keys
Security Patch : 2022-05-01
Version SDK : 31
Version Release : 12
Version Codename : REL
Firmware Version : compiler05121614
Userdata FS Type : F2FS
Creating autoformat settings... OK
Format "EMMC_BOOT_1" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_BOOT_2" partition( 0x00000000..0x003FFFFF )... OK
Format "EMMC_USER" partition( 0x00000000..0x1D1EFFFFFF )... OK
Get scatter info... OK
Verify scatter file... OK
Do NAND BMT remark... OK
Setup download info... OK
Get partition table catagory... OK [GPT]
Read mirror partition table... OK
Generate mirror partition table... OK
Downloading mirror partition table... OK
Read major partition table... OK
Generate major partition table... OK
Downloading major partition table... OK
Download "preloader"... OK "preloder_backup"... OK
Download "recovery"... OK
Download "vbmeta"... OK
Download "vbmeta_system"... OK
Download "vbmeta_vendor"... OK
Download "reserved"... OK
Download "vbmeta_oem"... OK
Download "vbmeta_vgc"... OK
Download "efuse"... OK
Download "logo"... OK
Download "md1img"... OK
Download "md1img_1"... OK
Download "spmfw"... OK
Download "scp1"... OK
Download "scp2"... OK
Download "sspm_1"... OK
Download "sspm_2"... OK
Download "gz1"... OK
Download "gz2"... OK
Download "lk"... OK
Download "lk2"... OK
Download "boot"... OK
Download "dtbo"... OK
Download "tee1"... OK
Download "tee2"... OK
Download "super"... OK
Download "cache"... OK
Download "userdata"... OK
Flashing done!

 

[saharsoft]

Oppo A9 2020 CPH1937 frp bypass one click​

 

[saharsoft]

Samsung A03 Core A032f Frp Bypass one click | test point

 

[saharsoft]

Selected model: Huawei MRD-LX1F (Huawei Y6 Pime)
Operation: Erase FRP
Software version: 9.3
Work ID: 88094882

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM22 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM22 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0717
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA01, SW VER: 0200, HW SUB CODE: 8A00
Detect chip [MT6761]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0xF0F9FD99, 0xCE821FE6, 0x85CF6BBF, 0xAA2575EE
Get Chip ID... [MT6761]
Get SOC ID... [BBD8BD9E74EC26D211DC482E3D9B74E01B111E1A682E4423E06A34AA36BDE69E]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [5]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x90014A68423861503E01C265CA9AC6ED
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: hB8aP>
EMMC_ID : 0x90014A68423861503E01C265CA9AC6ED
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x0747C00000 (29.12Gb)
RAM INFO:
INT_SRAM: 0x000003A500 (233.25Kb)
EXT_RAM : 0x0080000000 (2.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: info not available
DeviceLifeTimeEstB: 10% - 20% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... error(3)
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Huawei_MRD-LX1F%20(Huawei%20Y6%20Pime)/FRP_BACKUP_(2025-9-3_13-17-37)/
Format FRP... [P1] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Samsung SM-E426S (Samsung Galaxy F42 5G)
Operation: Erase FRP
Software version: 9.4
Work ID: 88631344

Connect phone in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [00000005]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Read Efuse error
Force switch to BROM... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM35 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port_V1632,usb2ser.sys,3.0.1504.0]
Device found at COM35 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0989
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6833]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x89D53BCF, 0x3D40CA0C, 0xFF4A9660, 0xC6096258
Get Chip ID... [MT6833]
Get SOC ID... [2BD9148D313FAE75D39FB6C3480754DEF5E1A13C8814EDA7DD15AB8F61E14BE5]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [14]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0x150100335636434D4200B00A6A4268C9
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: 3V6CMB
EMMC_ID : 0x150100335636434D4200B00A6A4268C9
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1D1F000000 (116.48Gb)
RAM INFO:
INT_SRAM: 0x0000070000 (448.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
HEALTH:
Pre EOL Info: normal
DeviceLifeTimeEstA: 0% - 10% device life time used
DeviceLifeTimeEstB: 0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EXT4] ... OK
Product Brand : samsung
Product Manufacturer : samsung
Product Model : SM-E426S
Product Name : f42xskt
Product Device : f42x
Product Board : f42x
Board Platform : mt6833
Build ID : SP1A.210812.016
Build Date : Mon Aug 11 10:31:02 KST 2025
Display ID : TP1A.220624.014.E426SKSS9DYG2
Security Patch : 2025-06-01
Version SDK : 33
Version Release : 13
Version Codename : REL
Firmware Version : E426SKSS9DYG2
Userdata FS Type : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-E426S%20(Samsung%20Galaxy%20F42%205G)/FRP_BACKUP_(2025-9-7_10-10-21)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Erase FRP done!

 

[saharsoft]

Selected model: Xiaomi Redmi A3 (Blue)
Operation: Erase FRP
Software version: 9.4
Work ID: 88661123

Connect phone in PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek PreLoader USB VCOM_V1632 (Android),usb2ser.sys,3.0.1504.0]
Device found at COM30 [PRELOADER]
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [00000007]
Active sec flags: [SBC SLA DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Preloader exist. Skip connection verification.
Get ME ID... OK
ME_ID = 0x5EF5D9DD, 0x11A29730, 0xE14CC4E7, 0x8301BE0C
Load DownloadAgent... OK
Search DA... OK [0]
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [PRELOADER]
Preloader alive. Skip initializing external RAM
Send 2nd DA... OK
DA2 auth: enabled
Get device info... OK
EMMC INFO:
EMMC_CNAME: C09F00
EMMC_ID : 0xD62D0043303946303051266557E02BDD
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0000400000 (4.00Mb)
EMMC_USER : 0x1D25D80000 (116.59Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
[EFUSE INFO]: BROM disabled !!!
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand : Redmi
Product Manufacturer : Xiaomi
Product Model : blue
Product Name : blue_global
Product Device : blue
Product Board : blue
Board Platform : mt6765
Build ID : AP3A.240905.015.A2
Build Date : Fri Jun 27 17:11:17 CST 2025
Display ID : 15 V816.0.7.0.VGRMIXM
Security Patch : 2025-06-01
Version SDK : 35
Version Release : 15
Version Codename : REL
Firmware Version : V816.0.7.0.VGRMIXM
Userdata FS Type : F2FS
MiAcc Find Device : Disabled
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Xiaomi_Redmi%20A3%20(Blue)/FRP_BACKUP_(2025-9-7_15-25-48)/
Format FRP... [P1] OK
Erase FRP done!