UMT ★★★ Post All Successfully Repaired Phones Ultimate Multi Tool ★★★

[GsmToto]

Model : All Exynos 2026
Operation : Reset FRP (Exynos)
Searching for Device...Found
Brand : samsung
Model : SM-A135F
Product : a13
Device : a13
Andriod Ver. : 14
Patch Level : 2026-02-05
PDA : A135FXXSEEZB2
Bootloader : A135FXXSEEZB2
Build ID : UP1A.231005.007.A135FXXSEEZB2
Preparing Environment...Done
Removing FRP Lock...Done
Rebooting to recovery mode...Done
Operation Finished.
Elapsed Time 00:17
[UltimateSams v1.0]
Saved to Logs\266041_145921.log

 

[GsmToto]

oppo A16k frp done by umt v2
Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:PL][OPPO V1]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM5)
Device Path : \\?\usb#vid_22d9&pid_0006#5&21e739f&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1504.0 [usb2ser.sys]
Mode : PRELOADER
Hw ID : MT6765 [0766] Helio P35/G35
Details : 8A00,CA00,0000
Sec. Config : [SBA:ON] [SLA:OFF] [DAA:ON]
MEID : 76DD38BA9B39449ED3861507C0440C65
SoC ID[0] : 4A9767E61D276AFA3E53844B2A269169
SoC ID[1] : 150D62E0D189B261BB27EF5E7BCD4BBC
Sending 1st DA..OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : preloader
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Running PL_EXPLOIT [1]...Done
Sending 2nd DA...OK
Local SLA V1...Blob Error!
HRID : 4A17E81D6B8F439CCE2521A09E897C97
RID : 4A17E81D6B8F439CCE2521A09E897C97
Int. RAM : 0x0000000000038000 [224.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : hC8aP>
CID : 90014A68433861503E0310184D8C9811
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000001000000 [16.00 MB]
USERAREA : 0x0000000E8F800000 [58.24 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 10%-20% LIFE TIME USED
Reading Partition Table...OK
boot.sec_patch : 2024-02-05
dtbo.fprint :
alps/vnd_oppo6765/oppo6765:11/RP1A.200720.011/1716286
433999
prd.fprint : alps/sys_oplus_mssi_64_cn/oplus_mssi_64
_cn:11/RP1A.200720.011/1716286433999
prd.os_ver : 11
prd.sec_patch : 2024-02-05
sys.fprint : alps/sys_oplus_mssi_64_cn/oplus_mssi_64
_cn:11/RP1A.200720.011/1716286433999
sys.os_ver : 11
sys.sec_patch : 2024-02-05
vendor.sec_patch : 2024-02-05
Bootloader : LOCKED
Resetting FRP...OK
Executing Safe Format...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v3.4]

 

[GsmToto]

Device : Samsung Galaxy S21 Ultra 5G (SM-G998U) BIT-A
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1501300 [SM8350] 00002000
OPK_DATA : 07A9DD9638DAB4DEF8D9C2C7B875AA37F0C6106739DF55B69CDA916BADE9D43
Initializing Protocol...OK
Using Pre-Defined Loader [SM-G998U_BIT-A.ufl]
Preparing Loader...Done
Sending Loader [SM-G998U_BIT-A]...Done
Executing Loader...OK
Hardware : SM8350, KLUDG4UHDC-B0E1 (UFS), 128 GB
LU Count : 6 [0x01DA8C00] [0x00000800] [0x00000800] [0x00000400] [0x00020000] [0x00000800]
Payload Info : [IN: 262144] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [80]
Reading Device Information...OK
Software : UP1A.231005.007.G998USQSAFXD1, G998USQSAFXD1 [Mon Apr 1 19:44:29 KST 2024]
Android Ver. : 14
Patch Level : 2024-04-01
boot.os_ver : 11
boot.sec_patch : 2024-04-01
sys.os_ver : 14
sys.sec_patch : 2024-04-01
vendor.os_ver : 11
vendor.sec_patch : 2024-04-01
Resetting FRP Lock...Done
Using Patch Method... Done
Operation Finished.
QcFire Ver. 13.9

 

[GsmToto]

SELECTED: SC9863A_64
ACTION: Erase FRP
Start Detect phone.
Phone must be off(you can service this phone without battery also).
Long press "VOL -"+ "VOL +" key while inserting usb cable.
Keep key untill boot complete.
Detected: SPRD U2S Diag (COM5)
Sending payload, keep boot key untill loader start.
Exploiting phone.....
Sending preloader 1
Sending preloader 2
Sending FDL 1.....
Sending FDL 2.....
New flash metod detected.
[5f] C1CD09B [5e] 744582
UID: M4F263_19_33_27
Bootable A/B Slot: _b

Disk Size: 58.24 GB
Storage: EMMC

Read partition info is supported by loader.
Reading: miscdata
Reading: misc
Saving bootloader control block
Reading: l_fixnv1_b
Reading: l_fixnv2_b
Reading: splloader
Found [persist] [persist] Size to download: 2 MB
Reading: persist
Removing frp, wait...
[1]FRP: persist
Done.
[can take 0-10 sec]Wait untill phone restart.
Exe version: UMT Unisoc Module 1.9

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Safe Format+FRP (Oppo)
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek PreLoader USB VCOM_V2023 (Android) (COM7)
Device Path : \\?\usb#vid_22d9&pid_0006#6&380b6f11&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : PRELOADER
Force Enter BROM...OK
Hw ID : MT6771 [0788] Helio P60/P70/G80
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : C457BB2632305A80956C2380FA60E0A9
SoC ID[0] : 4F65D4332107329B8B87E7100AD0329A
SoC ID[1] : B7AA5600D0D6B1A3CC3B5D3D489FEC58
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_oppo6771_18161.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 90014A6844456150330354B12DA346E5 [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
RID
Int. RAM : 0x0000000000038000 [224,00 KB]
Ext. RAM : 0x0000000180000000 [6,00 GB]
Flash ID : hDEaP3
CID : 90014A6844456150330354B12DA346E5
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000400000 [4,00 MB]
RPMB : 0x0000000001000000 [16,00 MB]
USERAREA : 0x0000001D1F000000 [116,48 GB]
PRE EOL : NORMAL
Life. Est.A : UNDEFINED
Life. Est.B : 50%-60% LIFE TIME USED
Reading Partition Table...OK
Manuf. : OPPO
And. Ver. : 9
Locale : en-US
Patch : 2020-06-05
Bootloader : UNLOCKED
Resetting FRP...OK
Executing Safe Format (Oppo)...Done
If phone stuck on recovery, try [Fix Recovery].
Operation Finished.
[UltimateMTK2 v3.5]

 

[GsmToto]

Device : Vivo Y85A (PD1730)
Operation : Format FS
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM6)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Opening Port...OK
Device in Firehose Mode Detected!
Hardware : 8953, HCG8a4 (eMMC), 64 GB
LU Count : 3 [0x0747C000] [0x00002000] [0x00002000]
Payload Info : [IN: 524288] [ OUT: 1048576] [SafeMode:ON]
Reading Partition Table...OK [55]
Reading Device Information...OK
Device : vivo vivo PD1730 [msm8953_64]
Brand : vivo
Prod.Name : msm8953_64
Software : OPM1.171019.011 release-keys, eng.compil.20210429.175101 [2021年 04月 29日 星期四 17:51:01 CST]
Android Ver. : 8.1.0
Patch Level : 2021-03-01
Preparing Data...Done
Formatting Userdata...Done
Resetting FRP Lock.......Done
Operation Finished.
QcFire Ver. 13.9

 

[kholio]

Realme 8​

frp done

 

[mobilemehdi]

Model : All Exynos 2026
Operation : Reset FRP (Exynos)
Searching for Device...Found
Brand : samsung
Model : SM-A145F
Product : a14
Device : a14
Andriod Ver. : 15
Patch Level : 2025-10-01
PDA : A145FXXUBDYJ5
Bootloader : A145FXXUBDYJ5
Build ID : AP3A.240905.015.A2.A145FXXUBDYJ5
Build Date : Tue Oct 21 17:02:04 KST 2025
Preparing Environment...Done
Removing FRP Lock...Done
Rebooting to recovery mode...Done
Operation Finished.
Elapsed Time 00:15
[UltimateSams v1.0]
Saved to Logs\260716_174750.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Erase Data
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port_V2023 (COM5)
Device Path : \\?\usb#vid_0e8d&pid_0003#6&380b6f11&0&2
#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser_mtk.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:False] [SLA:False] [DAA:False]
MEID : 375D14940217B7A5D1F0A77176AB265A
SoC ID[0] : BAB8303DEE4D20F590B0E9C200070643
SoC ID[1] : C22D16B9DD407359EC0145637ADA5308
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_gale.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100434A4E42345207E809E213437F [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 0F60E4C6EE59A1C5BD49745AA3ECCEE1
RID : 0F60E4C6EE59A1C5BD74745AA3ECCEE1
Int. RAM : 0x0000000000070000 [448,00 KB]
Ext. RAM : 0x0000000500000000 [4,00 GB]
Flash ID : CJNB4R
CID : 150100434A4E42345207E809E213437F
BOOT1 : 0x0000000000400000 [4,00 MB]
BOOT2 : 0x0000000000600000 [4,00 MB]
RPMB : 0x0000000000700000 [4,00 MB]
USERAREA : 0x0000000E2F800000 [58,24 GB]
PRE EOL : NORMAL
Life. Est.A : 0%-10% LIFE TIME USED
Life. Est.B : 0%-10% LIFE TIME USED
Reading Partition Table...OK
mi_ext.fprint :
Xiaomi/gale_global/missi:13/TP1A.220624.014/V14.0.6.0
.TGPMIXM
mi_ext.os_ver : 13
mi_ext.sec_patch : 2023-10-01
prd.fprint :
Xiaomi/gale_global/missi:13/TP1A.220624.014/V14.0.6.0
.TGPMIXM
prd.os_ver : 13
prd.sec_patch : 2023-10-01
sys.fprint :
Xiaomi/missi/missi:13/TP1A.220624.014/V14.0.6.0.TGPMI
XM
sys.os_ver : 13
sys.sec_patch : 2023-10-01
sys_ext.fprint :
Xiaomi/missi/missi:13/TP1A.220624.014/V14.0.6.0.TGPMI
XM
sys_ext.os_ver : 13
sys_ext.sec_patch : 2023-10-01
Bootloader : LOCKED
Erasing Userdata...OK
IMPORTANT : If phone reboots to recovery, simply Format from
there.
Operation Finished.
[UltimateMTK2 v3.5]

 

[kholio]

Redmi 9C
frp done

 

[GsmToto]

Model : All Exynos 2026
Operation : Reset FRP (Exynos)
Searching for Device...Found
Brand : samsung
Model : SM-A145MB
Product : a14
Device : a14
Andriod Ver. : 14
Patch Level : 2025-02-01
PDA : A145MBUBS9CYB7
Bootloader : A145MBUBS9CYB7
Build ID : UP1A.231005.007.A145MBUBS9CYB7
Build Date : Tue Feb 18 06:18:18 KST 2025
Preparing Environment...Done
Removing FRP Lock...Done
Rebooting to recovery mode...Done
Operation Finished.
Elapsed Time 00:14
[UltimateSams v1.1]
Saved to Logs\267521_164288.log

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : META Functions (Reset FRP (Infinix))
Checking for exisitng device in META mode...No Device!
Waiting for Device...Found
Mode : PRELOADER
Port : MediaTek PreLoader USB VCOM_V1632 (Android) (COM3)
Connecting Device...OK [SLA] 1 Auth OK
Waiting for Device [META]...OK
Port : MediaTek USB VCOM (Android) (COM4)
Brand : TECNO
Model : TECNO KL5
Market Name : unknown
Market Name : unknown
Manufac. : TECNO
Build Date : Wed Sep 10 12:17:37 CST 2025
Android : 14
Ven. Date : Wed Sep 10 11:06:34 CST 2025
Platform : MT6768
OEM : unknown
OEM Device : unknown
Disp. ID : KL5-XK678ABCDEFGHIJKLMNAc-U-OP-250910V2422
Inc. Ver. : 250910V2250
Patch Level : 2025-10-01
OTA Ver. : unknown
Serial : unknown
BRAND : TECNO
MODEL : TECNO KL5
BUILD : KL5-XK678ABCDEFGHIJKLMNAc-U-OP-250910V2422
BUILD DATE : Wed Sep 10 12:17:37 CST 2025
Reading Partition Data...Done
Total 55 Partitions Found.
Resetting FRP Lock...Done
Operation Finished.
[UltimateMTK2 v3.5]

 

[GsmToto]

Brand/Model : *Auto* / *Auto Detect*
Operation : Reset FRP
LOCAL SLA : ON
BOOT CFG : [EXPLOIT:BROM]
Waiting for Device...Found
Port : MediaTek USB Port (COM8)
Device Path : \\?\usb#vid_0e8d&pid_0003#5&30244b90&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver : MediaTek Inc., 3.0.1512.0 [usb2ser.sys]
Mode : BROM
Hw ID : MT6768 [0707] Helio P65/G85 k68v1
Details : 8A00,CA00,0000
Sec. Config : [SBA:True] [SLA:False] [DAA:True]
MEID : E9849AE1B5F6E27BA8F9E0259CA6F610
SoC ID[0] : 88657DFD9C1D48BDC3873DDB07F68AB3
SoC ID[1] : 5232D1338FA7E78818471CF213F2FA39
Running Exploit...Done
Downloading Preloader...OK
PRELOADER : preloader_oppo6769.bin
Sec. Config : [SBA:OFF] [SLA:OFF] [DAA:OFF]
[INTERNAL] DA Selected!
DA Security Patched
Sending 1st DA...OK
Jump DA Address...OK
Syncing...OK
Checksum Level is Storage
Connection : brom
Speed : HIGH-SPEED
Reading RAM Configuration...OK
Reading EMI Configuration...OK
CID : 150100444436384D42085BB7DCE3474B [EMMC]
Initializing Storage...OK
Sending 2nd DA...OK
Initialize DA Extension...OK
HRID : 38B3B2BC23A42AD02B18E65432D70698
RID : 38B3B2BC23A42AD02B10E65432D70698
Int. RAM : 0x0000000000070000 [448.00 KB]
Ext. RAM : 0x0000000100000000 [4.00 GB]
Flash ID : DD68MB
CID : 150100444436384D42025BB7DCE3474B
BOOT1 : 0x0000000000400000 [4.00 MB]
BOOT2 : 0x0000000000400000 [4.00 MB]
RPMB : 0x0000000000400000 [4.00 MB]
USERAREA : 0x0000000747C00000 [29.12 GB]
PRE EOL : NORMAL
Life. Est.A : LIFE TIME USAGE EXCEED
Life. Est.B : LIFE TIME USAGE EXCEED
Connected to High-Speed DA Port
Reading Partition Table...OK
And. Ver. : 11
Build Dt. : Wed May 11 10:46:21 CST 2022
Display ID : RP1A.200720.011 release-keys
Ver. Inc. : 1607914664672
Locale : en-US
Patch : 2022-05-05
boot.sec_patch : 2022-05-05
dtbo.fprint : alps/vnd_oppo6769/oppo6769:11/RP1A.200720.011/1607978664672
prd.fprint : alps/sys_oplus_mssi_64_cn/oplus_mssi_64_cn:11/RP1A.200720.011/1607914664672
prd.os_ver : 11
prd.sec_patch : 2022-05-05
sys.fprint : alps/sys_oplus_mssi_64_cn/oplus_mssi_64_cn:11/RP1A.200720.011/1607914664672
sys.os_ver : 11
sys.sec_patch : 2022-05-05
vendor.sec_patch : 2022-05-05
Bootloader : LOCKED
Resetting FRP...OK
Operation Finished.
[UltimateMTK2 v3.5]

 

[GsmToto]

Device : Samsung Galaxy A70 (SM-A705FN) BIT-5
Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
SAMSUNG (NEW) : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL UP + DOWN on phone more than 3 times rapidly and then leave EDL Cable Button.
OPPO/REALME : Use Vol Down + Power to Enter Recovery > Select Language > Connect Cable
then tap 3 times on Version shown at bottom center > Click Yes.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.5.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Protocol Ver. : 2
Hardware ID : E1500900 [SM6150] 00002000
OPK_DATA : E6C467292D5EE31FC2928B69166625C7E8C02016F4830F274D39A8AC38B05A4E
Initializing Protocol...OK
Using Pre-Defined Loader [SM-A705FN_BIT5.ufl]
Preparing Loader...Done
Sending Loader [SM-A705FN_BIT5]...Done
Executing Loader...OK
Hardware : SM6150, KM2V7001CM-B706 (UFS), 128 GB
LU Count : 4 [0x01DC5C00] [0x00000800] [0x00000800] [0x00003C00]
Payload Info : [IN: 262144] [ OUT: 16384] [SafeMode:ON]
Reading Partition Table...OK [61]
Reading Device Information...OK
Software : RP1A.200720.012.A705FNXXS5DVK6, A705FNXXS5DVK6 [Tue Nov 15 17:23:36 KST 2022]
Android Ver. : 11
Patch Level : 2022-12-01
boot.os_ver : 11
boot.sec_patch : 2022-12-01
sys.os_ver : 11
sys.sec_patch : 2022-12-01
vendor.os_ver : 11
vendor.sec_patch : 2022-12-01
Resetting FRP Lock...Done
Using Patch Method... Done
Operation Finished.
QcFire Ver. 14.0