★★ Post Here All Successful Stories By BB5 Easy Service Tool (BEST) Nokia Dongle ★★

maanarman · Dec 30, 2018

Nokia 103 Write Flash Done

Code:

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 2D5C23B74FD1A3AC64EBA9C339406DD1
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.13.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.13.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:01
Reboot phone Ok

Connect phone on selected interface...

maanarman · Dec 30, 2018

RM-1190 Write Flash Done

Code:

Registered to: MAANARMAN

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_ROM_eMP_10.02.11
VIVA : RM-1190_VIVA_eMP_10.02.11
LANG : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
JMPT : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 41 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 5194972C074C4A9B6E207F1CD3056B7E
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.11.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP   : 00100000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0112 ,
[0] : FLASH_DIE : 00C2 0020 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_ROM_eMP_10.02.11
SecureDecrypt : RM-1190_VIVA_eMP_10.02.11
SecureDecrypt : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
SecureDecrypt : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
SecureDecrypt : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
OVRLP : 000069B900000001
PHPID : DUBAI61D.11.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_ROM_eMP_10.02.11
Write : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
Write : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
Write : RM-1190_VIVA_eMP_10.02.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_ROM_eMP_10.02.11
[VERIFY] DONE : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_VIVA_eMP_10.02.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:00:56
Reboot phone Ok

Connect phone on selected interface...

maanarman · Dec 31, 2018

NOKIA 130 Write Flash Done

Code:

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : E98F27CFA30E46B0474964192BF49DD9
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:04
Reboot phone Ok

Connect phone on selected interface...

maanarman · Dec 31, 2018

Nokia 150 Write Flash Done

Code:

Registered to: MAANARMAN

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1190_ROM_eMP_10.02.11
VIVA : RM-1190_VIVA_eMP_10.02.11
LANG : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
CUST : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
JMPT : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 919247B9B0583450FAEC761A99395856
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : DUBAI61D.30.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Dubai.fg
DA_VERIFY : 00
DA_JUMP   : 00100000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 ,
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
SecureDecrypt : RM-1190_ROM_eMP_10.02.11
SecureDecrypt : RM-1190_VIVA_eMP_10.02.11
SecureDecrypt : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
SecureDecrypt : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
SecureDecrypt : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
OVRLP : 000069B900000001
PHPID : DUBAI61D.30.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1190_ROM_eMP_10.02.11
Write : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
Write : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
Write : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
Write : RM-1190_VIVA_eMP_10.02.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1190_ROM_eMP_10.02.11
[VERIFY] DONE : RM-1190_LANG_PACK_ROM_IJ_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_JUMP_TABLE_IJ_MEA_PK_eMP_10.02.11_001
[VERIFY] DONE : RM-1190_VIVA_eMP_10.02.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A0000-0x003F7FFF , LEN : 0x00058000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:00:55
Reboot phone Ok

Connect phone on selected interface...


Phone found!
MTKx Nokia Phone detected
Read info... Ok

maanarman · Jan 2, 2019

Nokia 1616 Phone Lock Remove Done

Code:

ERROR : PHONE READ INFO FAILED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

MCU: V 03.61 29-01-10 RH-125 (c) Nokia
IMEI: 358234034136427
Product Serial Number: DWK410177
Product Code         : 0588620
Module Code          : 0204373
Basic Production Code: 0583104
PPM SW Version       : V 03.61 29-01-10 RH-125 (c) Nokia IA
ADSP Version         : p V 03.61\n29-01-10\nRH-125\n(c) NMP\nia
MCU SW Version       : V 03.61 29-01-10 RH-125 (c) Nokia
HW Version           : 3000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : TPO:BOHAIv80 HX5081
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Jan 3, 2019

RM-1133 Write Flash Done

Code:

Registered to: MAANARMAN

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1133_ROM_eMP_10.01.11
VIVA : RM-1133_VIVA_eMP_10.01.11
LANG : RM-1133_LANG_PACK_ROM_IJ_eMP_10.01.11_004
CUST : RM-1133_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_004
JMPT : RM-1133_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_004
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 4CAD04789863AE8DA5B1BBB2DADD17A3
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL failed! (Bad ACK) BL INIT : DEAD
BootLoader Init Failed (HW/Connection Error)
Connect phone on selected interface...

Boot Error
Flashing failed!
Connect phone on selected interface...


Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1133_ROM_eMP_10.01.11
VIVA : RM-1133_VIVA_eMP_10.01.11
LANG : RM-1133_LANG_PACK_ROM_IJ_eMP_10.01.11_004
CUST : RM-1133_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_004
JMPT : RM-1133_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_004
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 4CAD04789863AE8DA5B1BBB2DADD17A3
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : LAGOS61D.13.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Lagos.fg
DA_VERIFY : 00
DA_JUMP   : 00100000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8E
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00EC , [GigaDevice] GD25LQ32
[0] : FLASH_DIE : 00C8 0060 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
SecureDecrypt : RM-1133_ROM_eMP_10.01.11
SecureDecrypt : RM-1133_VIVA_eMP_10.01.11
SecureDecrypt : RM-1133_LANG_PACK_ROM_IJ_eMP_10.01.11_004
SecureDecrypt : RM-1133_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_004
SecureDecrypt : RM-1133_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_004
OVRLP : 000069B900000001
PHPID : LAGOS61D.13.00.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1133_ROM_eMP_10.01.11
Write : RM-1133_LANG_PACK_ROM_IJ_eMP_10.01.11_004
Write : RM-1133_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_004
Write : RM-1133_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_004
Write : RM-1133_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1133_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1133_LANG_PACK_ROM_IJ_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_004
[VERIFY] DONE : RM-1133_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x00368000-0x003F7FFF , LEN : 0x00090000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:00:55
Reboot phone Ok

 - > Hint : If phone shows Battery charge icon -  press and hold PowerOn button 10 seconds

maanarman · Jan 3, 2019

1616 Phone Lock Remove Done

Code:

MCU: V 04.65 24-04-10 RH-125 (c) Nokia
IMEI: 353408044352894
Product Serial Number: DWM395908
Product Code         : 0588620
Module Code          : 0204373
Basic Production Code: 059B9S2
PPM SW Version       : V 04.65 24-04-10 RH-125 (c) Nokia IA
ADSP Version         : p V 04.65\n24-04-10\nRH-125\n(c) NMP\nia
MCU SW Version       : V 04.65 24-04-10 RH-125 (c) Nokia
HW Version           : 3000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv94 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

maanarman · Jan 3, 2019

1616 Phone Lock Remove Done

Code:

MCU: V 04.65 24-04-10 RH-125 (c) Nokia
IMEI: 353408044352894
Product Serial Number: DWM395908
Product Code         : 0588620
Module Code          : 0204373
Basic Production Code: 059B9S2
PPM SW Version       : V 04.65 24-04-10 RH-125 (c) Nokia IA
ADSP Version         : p V 04.65\n24-04-10\nRH-125\n(c) NMP\nia
MCU SW Version       : V 04.65 24-04-10 RH-125 (c) Nokia
HW Version           : 3000
UEM Version          : 1328
UPP Version          : 8850
LCD Version          : WIN:BOHAIv94 NT39121
  ********** SIMLOCK INFO  **********
CONFIG_DATA  : 0010100000000000
PROFILE_BITS : 0000000000030002
ASIC         : 11
PROVIDER     : Default Test Operator

   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
ST_LCD_TEST               : PASSED


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

FACTORY SET TO : Full Factory Set
 OK
FACTORY SET TO : User Data
 OK
FACTORY SET TO : Leave Factory
 OK
FACTORY SET TO : Service Center
 OK
FACTORY SET TO : Software Upgrade
 OK
FACTORY SET TO : Production Tune
 OK

gsmsarwer · Jan 8, 2019

nokia ta-1017 flash file 059z1wo plzzzzz fast reply

Deepesh Sharma · Jan 18, 2019

Nokia X2 DEad Recover Done

Faizan siddiqui · Jan 23, 2019

NOKIA TA 1034 USER CODE RESET WITH BEST

LOGS

Code:

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 16 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0001
BB_CPU_SN : 6C69568E38E33AF253214E9433664106
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
BROM/BL stage done
MT626x : Reset User Code
All done! Remove USB cable
All Security Settings deactivated!
Code set to default : 12345
Done!
Connect phone on selected interface...

maanarman · Jan 23, 2019

Nokia Lumia 520 Write Flash done

Code:

Connect phone on selected interface...

Core : v2.29 , WP10x FlashEngine : v3.2

FFU : RM914_3058.50000.1425.0001_RETAIL_im_mea3_380_01_446538_prd_signed.ffu
Checking FFU file, wait...
FFU Revision ID   : 2.0
FFU Model ID      : Nokia.MSM8227.P6036
FFU RootKeyHash   : F771E62AF89994064F77CD3BC16829503BDF9A3D
FFU Languages     : Albanian , Arabic , Azerbaijan(Latin) , Belorusian , Bulgarian , Catalan , Croatian , Czech , Danish (Denmark) , Dutch (Netherlands) , English (UK) , English , Estonian , Filipino (Philippines) , Finnish , French , German , Greek , Hwbre (Israel) , Hindi (India) , Hungarian , Indonesian , Italian , Japanese , Kazakh , Korean , Latvian , Lithuanian , Macedonian , Malay (Malaysia) , Norwegian (Bokmal , Norway) , Persian (Iran) , Polish , Portuguese(Brazil) , Portuguese(Portugal) , Romanian , Russian , sr-latn-rs , Chinese , Slovak , Slovenian , Spanish(Mexico) , Spanish , Swedish , Thai , Chinese(Taiwan) , Turkish , Ukrainian , Uzbekistan(Latin) , Vietnamese ,
FFU ChipSectors   : 15155200
FFU Header        : 0x000E0000
FFU Payload       : 0x60040000
FFU FastVerify    : Ok

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version        : 1.15
Protocol Implementation : 1.28
=== Phone Initial info :
Phone RMxxx ID : RM-914
Phone Model ID : Nokia.MSM8227.P6036.1.2
Phone Model PC : 059S4H0
Phone IMEI     : 353071066091897
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status   : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey    : F771E62AF89994064F77CD3BC16829503BDF9A3D
=== Other info :
SD present        : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 44%
RPMB Provision Status Code : 0x0101
Device RAM size : 512 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM914_3058.50000.1425.0001_RETAIL_im_mea3_380_01_446538_prd_signed.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted :)
Perform Data Partition Erase
Erase done
Sending FFU Payload Data...
Finishing flashing

Flashing done!
Green Light :)

Image Sent, processing PostFlash
FinalConfig : abnormal status, error code : 0xFF7F0000
Make Factory Set : Ok
Restore RAMBkp : Ok
Update NVI from Image
Ok , NVI will be updated on first boot!
PostFlash Finished

Total flash time : 00:02:31

Rebooting

Connect phone on selected interface...

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

Phone disconected!

Connect phone on selected interface...

maanarman · Jan 23, 2019

Nokia 108 Factory Format Done

Code:

Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : 7E316A46D2C329A8CB54FC0183B88199
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.21.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000

Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:00:27
Connect phone on selected interface...

maanarman · Jan 26, 2019

Nokia 130 Write Flash Done

Code:

Registered to: MAANARMAN

Connect phone on selected interface...

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-1035_ROM_eMP_10.01.11
VIVA : RM-1035_VIVA_eMP_10.01.11
LANG : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
CUST : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
JMPT : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 79 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : C278E00C8D51FAE5729BAE41295156ED
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
SecureDecrypt : RM-1035_ROM_eMP_10.01.11
SecureDecrypt : RM-1035_VIVA_eMP_10.01.11
SecureDecrypt : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
SecureDecrypt : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
SecureDecrypt : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
OVRLP : 000069B900000001
PHPID : CRYSTAL.10.01.11.p2
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-1035_ROM_eMP_10.01.11
Write : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
Write : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
Write : RM-1035_VIVA_eMP_10.01.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-1035_ROM_eMP_10.01.11
[VERIFY] DONE : RM-1035_LANG_PACK_ROM_IJ_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_CUSTPACK_ROM_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_JUMP_TABLE_IJ_MEA_PK_eMP_10.01.11_001
[VERIFY] DONE : RM-1035_VIVA_eMP_10.01.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:02
Reboot phone Ok

Connect phone on selected interface...

maanarman · Jan 27, 2019

RM-1035 Phone Lock Remove Done

Code:

Registered to: MAANARMAN

Connect phone on selected interface...


Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 214 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 43BC96DF7D414D64F38CF2E2F9B7FF1E
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : CRYSTAL.10.01.11.p2
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Crystal.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00DB , [MX] MX25U3235E
[0] : FLASH_DIE : 00C2 0025 0036 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000

Executing FFS FORMAT now...
FAT_RANGE : 0x003A4000-0x003F3FFF , LEN : 0x00050000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE

Elapsed: 00:00:20
Connect phone on selected interface...

maanarman · Feb 4, 2019

Nokia 108 Write Flash Done

Code:

Core : v2.29 , MTKx FlashEngine : v14.0

Verify files ...
MAUI : RM-944_ROM_eMP_12.06.11
VIVA : RM-944_VIVA_eMP_12.06.11
LANG : RM-944_LANG_PACK_ROM_IJ_eMP_12.06.11
CUST : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.06.11
JMPT : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_12.06.11
 - > MODE : FullFlash

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
 - > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 41 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 625A
BB_CPU_HW : CA01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6250_S0001
BB_CPU_SN : DD5EEBF89A69786E687289DDF4182067
BROM Protocol Version : 05
BROM Status : 1012
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : Bree.12.06.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Bree.fg
DA_VERIFY : 00
DA_JUMP   : 00040000
DA_AUTH   : Passed!
DA_INFO   : 0xC0 , Ver : 3.2 , BBID : 0x88
DA_CSTAT  : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00E2 , [WINBOND] W25Q32BV
[0] : FLASH_DIE : 00EF 0040 0016 0000
[0] : FLASH_LEN : 0x00400000
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
SecureDecrypt : RM-944_ROM_eMP_12.06.11
SecureDecrypt : RM-944_VIVA_eMP_12.06.11
SecureDecrypt : RM-944_LANG_PACK_ROM_IJ_eMP_12.06.11
SecureDecrypt : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.06.11
SecureDecrypt : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_12.06.11
OVRLP : 000069B900000001
PHPID : Bree.12.06.11.p1
OVRLP : 00004DF900000001
DA : FORMAT_BIN
Processing Flash Pre-format
FILES : 5
SAFE_BLOCK : 04
FORMAT_BIN : Ok
WRITE_STYLE : DEF : 0x01 (SEQ)
Write : RM-944_ROM_eMP_12.06.11
Write : RM-944_LANG_PACK_ROM_IJ_eMP_12.06.11
Write : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.06.11
Write : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_12.06.11
Write : RM-944_VIVA_eMP_12.06.11
CODE_DNLOAD : Ok
[VERIFY] DONE : RM-944_ROM_eMP_12.06.11
[VERIFY] DONE : RM-944_LANG_PACK_ROM_IJ_eMP_12.06.11
[VERIFY] DONE : RM-944_CUSTPACK_ROM_IJ_MEA_PK_eMP_12.06.11
[VERIFY] DONE : RM-944_JUMP_TABLE_IJ_MEA_PK_eMP_12.06.11
[VERIFY] DONE : RM-944_VIVA_eMP_12.06.11
CODE_VERIFY : Ok
Executing FFS FORMAT now...
FAT_RANGE : 0x003A6000-0x003F3FFF , LEN : 0x0004E000
DA_RET   : DA_IN_PROGRESS
DA_RET   : FORMAT_DONE
Rebooting phone now

Flashing done!
Total flash time : 00:01:02
Reboot phone Ok

Connect phone on selected interface...

Forum Supporter · May 10, 2019

Lumia 540 RM1141 Flashing Done

Please login to view image

Deepesh Sharma · May 20, 2019

Nokia Ta-1066 Sucessfully Recovered With Flashing

Please login to view image

Akhtar Ali Jatt · May 27, 2019

Nokia 230 Format /Reset Settings Done

Operation : Reset Settings [ v1.16 ]

Make sure device is powered off. Power off, if need. Wait 10 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM23)
MODE : NOKIA USB SERIAL
PORT : 23
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : ACFA02DE26017715DFEAA58130C789AC
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : DOHA.13.00.11.p1
BOOT : SWR : 13.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : DOHA.13.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

FFS Info exists in MAUI : 0x00DC0000 : 0x00234000
FFS Format ...
FFS Format Ok!

Done!
Elapsed: 00:00:45

Reconnect Power/Cable!

Akhtar Ali Jatt · May 31, 2019

Nokia 216

Open VPLfile : RM-1187_059X860_30.01.11.vpl
Description : RM-1187 059X860 IJ 30.01.11
DeviceType : RM-1187
ProductCode : 059X860
SoftwareVer : 30.01.11
PPM LangPack :
[1] : Urdu (Islamic Republic of Pakistan)
[2] : English (United Kingdom)
Load Ok!

Operation : Write FirmWare [ v1.16 ]
Setting : UserData erase : False
Setting : LangPack Only : False

Make sure device is powered off. Power off, if need. Wait 10 seconds after
Insert USB cable in phone

Waiting for device connection ...

PTFN : Nokia USB Serial Port (COM20)
MODE : NOKIA USB SERIAL
PORT : 20
BROM : Init BROM
BROM init passed!
CHIP : MT6260 , SBID : 0xCB00 , HWVR : 0x8000 , SWVR : 0x0000
BROM : SECCFG : 0x00000007
BROM : NOKIA USB SERIAL
BROM : 0x05 BL : 0x00
BROM : MEID : 45B108E0D17FCC8704F9272744464B01
BROM : Run BootLoader ...
BOOT : Run BL ver. 01
BOOT : 0x05 BL : 0x01
BOOT : WD : 0005
BOOT : RTC : Setup ...
BOOT : RTC : 000E
BOOT : PRJ : SUEZ.12.00.11.p1
BOOT : SWR : 12.00.11
AGENT : Look for suitable BootChain in DA ...
AGENT : DEFAULT AUTO
AGENT : Found MT6260
AGENT : SUEZ.12.00.11.p1
BOOT : Sending 1st DA ...
BOOT : DA sent
BOOT : Transfer control to DA ...
DA : Sync Passed!
DA : Authentification pass!
DA : Agent : v03.02 on BBID : 0x8B

NOR: 00EF : 0060 : 0018 : 0000
NOR: [WINBOND] W25Q128FW
NOR:
TSIZE : 0x01000000 [ 16.00 MB ]
PSIZE : 0x01000000 [ 16.00 MB ]
STYPE : 0x00000000
FLOTP : DA_NOR_OTP_EXIST

STATUS : OK
BSTYLE : SF_FLASH_BOOT

Boot done!

VPL SoftwareVersion : 30.01.11 [RM-1187]
DEV SoftwareVersion : 12.00.11
SWInfo compare result : DEVICE SW ( Major version ) is LOWER, than in VPL!

Load FlashSet :
MROM : RM-1187_SUEZ_ROM_eMP_30.01.11
LANG : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
CUST : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
JUMP : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
VIVA : RM-1187_SUEZ_VIVA_eMP_30.01.11

Prepare FlashSet :
DCR : RM-1187_SUEZ_ROM_eMP_30.01.11
DCR : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
DCR : RM-1187_SUEZ_VIVA_eMP_30.01.11

Prepare Target
SDS : OK : 0x00FF4000 : 0x0000C000

Erase Target Flash
Erase done!

Write Target Flash
Write : RM-1187_SUEZ_ROM_eMP_30.01.11
Write : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
Write : RM-1187_SUEZ_VIVA_eMP_30.01.11
Write done, waiting target response ...
Write flash done!

Verify Target FlashContent
Verify : RM-1187_SUEZ_ROM_eMP_30.01.11
Verify : RM-1187_SUEZ_LANG_PACK_ROM_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_CUSTPACK_ROM_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_JUMP_TABLE_IJ_eMP_30.01.11
Verify : RM-1187_SUEZ_VIVA_eMP_30.01.11

Done!
Elapsed: 00:02:41

★★ Post Here All Successful Stories By BB5 Easy Service Tool (BEST) Nokia Dongle ★★

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Member

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview

Friend's Martview