We are pleased to announce
UMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v3.8
The Ultimate MediaTek Tool
What's New:
Infinix/iTel/Tecno Direct Bootloader Unlock in META Mode
- Unlock supported device directly from META Mode
- No need to run flashing unlock command in Fastboot
- Automatic compatibility check to avoid bricked device
- Automatic Backup of LK in case you need to restore
- If firmware supports partition table read, it should be supported
- Restoring LK or flashing stock LK in fastboot will relock bootloader
- Do not relock bootloader if you have modified anything in firmware
Compatibility Check Information:
- We have added this check to make sure that your device will not be bricked.
- If compatibility check is failed, you still have option to proceed to unlock.
- This check is a security measure and does not guarantee that this method will not work on that device.
- Please be advised that this method does not carry any kind of warranty.
- Please use this method on your own risk.
Restore LK
- You can use this option to restore Backup LK to restore device to original state.
- Restore LK will cause bootloader relock. Never attempt it if device firmware is modified.
Unlock Bootloader 2
- Use this method if first method failed to unlock bootloader
- You can also use this option if slot b is active (fastboot getvar current-slot)
All these functions are available in Service > META Functions
Tested Devices:
- Infinix X6531 (2026-03-05)
- Infinix X6532 (2026-01-01)
- Infinix X6532C (2025-07-05)
- TECNO BG7 (2025-03-05)
- TECNO KJ5 (2025-10-01)
- TECNO KJ8 (2026-05-01)
- TECNO KL4h (2025-08-05)
VIDEO TUTORIAL
Special thanks to:
- Shensohau
and all our users who helped us with their test reports.
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.
It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...
SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 11 YEARS
WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE PROHIBIT USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors
PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED
Telegram
Br,
UMT
UMTv2 / UMT Pro
Innovative and Intelligent
UltimateMTK2 v3.8
The Ultimate MediaTek Tool
What's New:
Infinix/iTel/Tecno Direct Bootloader Unlock in META Mode
- Unlock supported device directly from META Mode
- No need to run flashing unlock command in Fastboot
- Automatic compatibility check to avoid bricked device
- Automatic Backup of LK in case you need to restore
- If firmware supports partition table read, it should be supported
- Restoring LK or flashing stock LK in fastboot will relock bootloader
- Do not relock bootloader if you have modified anything in firmware
Compatibility Check Information:
- We have added this check to make sure that your device will not be bricked.
- If compatibility check is failed, you still have option to proceed to unlock.
- This check is a security measure and does not guarantee that this method will not work on that device.
- Please be advised that this method does not carry any kind of warranty.
- Please use this method on your own risk.
Restore LK
- You can use this option to restore Backup LK to restore device to original state.
- Restore LK will cause bootloader relock. Never attempt it if device firmware is modified.
Unlock Bootloader 2
- Use this method if first method failed to unlock bootloader
- You can also use this option if slot b is active (fastboot getvar current-slot)
All these functions are available in Service > META Functions
Tested Devices:
- Infinix X6531 (2026-03-05)
- Infinix X6532 (2026-01-01)
- Infinix X6532C (2025-07-05)
- TECNO BG7 (2025-03-05)
- TECNO KJ5 (2025-10-01)
- TECNO KJ8 (2026-05-01)
- TECNO KL4h (2025-08-05)
VIDEO TUTORIAL
Special thanks to:
- Shensohau
and all our users who helped us with their test reports.
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode, you must select PRELOADER in connection settings, otherwise software will try to Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
Please use UMT Card Manager to Update Card Counter / Firmware / Activate Add-on, available via Support Access.
It Has Begun...
Keep Following Us...
Some Nice Updates Are On The Way...
SPECIAL THANKS TO OUR VALUABLE USERS FOR THEIR LOVE AND SUPPORT FOR MORE THAN 11 YEARS
WARNING :
ESN / MEID / IMEI REPAIR IS INTENDED TO REPAIR ESN / MEID / IMEI TO ORIGINAL ONE WRITTEN ON PHONE BACK LABEL / BOX. WE DO NOT ENDORSE OR ENCOURAGE ESN / MEID / IMEI CHANGING. ITS ILLEGAL. USER IS SOLE RESPONSIBLE FOR ANY ILLEGAL ACTIVITY DONE WITH USE OF FEATURES PROVIDED IN OUR SOFTWARE, NOT LIMITED TO ESN / MEID / IMEI.
ANY USER USING OUR SOFTWARE FOR ILLEGAL PURPOSE WILL BE SOLE RESPONSIBLE FOR HIS ACTS.
WE PROHIBIT USE OF OUR SOFTWARE FOR ANY ILLEGAL PURPOSE.
How to Download:
- Download UMT Support Access.
- Connect UMT Box/Dongle to PC and Run UMT Support Access.
- Download required Executable from Installer folder.
- Enjoy!
- Download Mirrors
PLEASE DO NOT POST OFF TOPIC HERE. ONLY POST REGARDING THIS UPDATE AND SUPPORTED MODELS. ANY OFF TOPIC POST WILL BE DELETED
Telegram
Br,
UMT
