- Dec 9, 2019
- 9
- 7
Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2496
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0xCA15995A
Manufacturing date: Dec 2018
CID: 15010044 48364441 4202CA15 995AC5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 195]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x10
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
ANDROID System Info:
platform: , cpu abi: arm64-v8a
board: , name:
brand: , model: build id: RP1A.200720.012, version: 5.1.1 [Lollipop] (RP1A.200720.012.A127FXXU4AUK1)
build description: a12snsxx-user 11 RP1A.200720.012 A127FXXU4AUK1 release-keys
crypto state: encrypted?
Internal storage: 19.99 MiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KMDH6001DA-B422/64GB (BGA254)
READ DUMP..........................................................................................................................................................................
Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2496
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0xCA15995A
Manufacturing date: Dec 2018
CID: 15010044 48364441 4202CA15 995AC5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 195]
User area: 58.24 GiB(62,537,072,640 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\ext_csd.bin" (CRC32: 0x64E846E5)
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 1.586 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\boot1.bin" (CRC32: 0x7B56C39C)
Blank checking: NOT blank
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 1.587 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\boot2.bin" (CRC32: 0xBC3753D6)
Blank checking: NOT blank
Current partition access:
Access to user area
Reading userarea, size: 1 GiB... Done in 8 mins 7.458 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\userarea_1GiB.bin" (CRC32: 0x29F5EB7C)
this is full dump from working phone bIT4 WITHOUT pasword
337.93 MB file on MEGA
WE NEED HELP AND SOLUTION FOR SOLVE PROBLEM NOT ONLY SEND LOG FROM YOUR WORK !!!!!!
Interface: UFI High-Speed
Serial number: 0011-8842-2496
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0xCA15995A
Manufacturing date: Dec 2018
CID: 15010044 48364441 4202CA15 995AC5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 195]
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 64 MiB
Hardware reset function: 1
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x01
Bus width: x4 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x10
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
ANDROID System Info:
platform: , cpu abi: arm64-v8a
board: , name:
brand: , model: build id: RP1A.200720.012, version: 5.1.1 [Lollipop] (RP1A.200720.012.A127FXXU4AUK1)
build description: a12snsxx-user 11 RP1A.200720.012 A127FXXU4AUK1 release-keys
crypto state: encrypted?
Internal storage: 19.99 MiB
crypto state: unencrypted
eMMC selected: [SAMSUNG] KMDH6001DA-B422/64GB (BGA254)
READ DUMP..........................................................................................................................................................................
Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2496
Boot version: 1.05, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 3.0 V
Bus: 1 bit (SDR 52MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x15 (Samsung)
Product name: DH6DAB (0x444836444142), rev: 0x02, serial number: 0xCA15995A
Manufacturing date: Dec 2018
CID: 15010044 48364441 4202CA15 995AC5CA
CSD: D0270132 0F5903FF F6DBFFEF 8E40400C
Firmware version: 0x02
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB [Provisioned, counter: 195]
User area: 58.24 GiB(62,537,072,640 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\ext_csd.bin" (CRC32: 0x64E846E5)
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Done in 1.586 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\boot1.bin" (CRC32: 0x7B56C39C)
Blank checking: NOT blank
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Done in 1.587 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\boot2.bin" (CRC32: 0xBC3753D6)
Blank checking: NOT blank
Current partition access:
Access to user area
Reading userarea, size: 1 GiB... Done in 8 mins 7.458 s
File saved to "\Other\(RP1A.200720.012.A127FXXU4AUK1-5.1.1-RP1A.200720.012)[KMDH6001DA-B422_CA15995A]\userarea_1GiB.bin" (CRC32: 0x29F5EB7C)
this is full dump from working phone bIT4 WITHOUT pasword
337.93 MB file on MEGA
WE NEED HELP AND SOLUTION FOR SOLVE PROBLEM NOT ONLY SEND LOG FROM YOUR WORK !!!!!!