ASKH-AL00 ID Lock Remove Octoplus Huawei Tool
Read Mores......... HERE
Welcome to Octoplus Huawei Software v.1.2.6
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 HUAWEI USB COM 1.0
Your balance: 150 credit(s)
Job ID: 0000000001B0438E
2021-10-19 03:46:28 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: STK-AL00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: GHN6R19921058089
Detected Android Sooner Single ADB Interface port
Connecting to the credit server...
Username: cxYQKOIZma
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ASK-AL00x
System: ASKH-AL00 9.1.1.212(C00E112R3P6)
MEID: A00000B1466464
IMEI A: 868187045338791
IMEI B: 868187045427743
S/N: GHN6R19921058089
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.6 Software version.
Read Mores......... HERE
Read Mores......... HERE
Welcome to Octoplus Huawei Software v.1.2.6
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM5 HUAWEI USB COM 1.0
Your balance: 150 credit(s)
Job ID: 0000000001B0438E
2021-10-19 03:46:28 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: STK-AL00
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: GHN6R19921058089
Detected Android Sooner Single ADB Interface port
Connecting to the credit server...
Username: cxYQKOIZma
Checking balance...
Your balance: 150 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: ASK-AL00x
System: ASKH-AL00 9.1.1.212(C00E112R3P6)
MEID: A00000B1466464
IMEI A: 868187045338791
IMEI B: 868187045427743
S/N: GHN6R19921058089
Resetting Huawei ID...
Formatting secure data...
Rebooting device...
Reset Huawei ID done.
Performed by 1.2.6 Software version.
Read Mores......... HERE