tecno bf7n have pattern lock.when simply try to conect .Bf7n (Tecno spark go 2023) dead and show only mtk port.then I connected with cm2 through custom da .preloader .after bachup firmware.write preloader .but after flash preloader.now no port show.when connect with cable.only white light blinking on screen.
=== [2025-06-04_00-04-09 C:\InfinityBox\CM2MT2\CM2MT2.exe] ===
CM2 - MT2 Service Tool v2.84
Probe UAC...
Ok
Wait...
S/N: 004F013B9D v0166
Initalize log engine...
Ok
Build directories tree...
Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 1 dirs: 0
Load EMI database...
28 records
Load IDBase v915508 Ok
Build device list...
Ok
Load 173 profiles...
Ok
Init filesystem tools...
Ok
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
Do you want to read manual?
No
Ready
DA selected: Tecno | -soc-Dimensity-9000 | DA_BR.13372eec.bin | auth_sv5.auth
DA files missing
Select another Device from list or Click to [Get boot files]
Stop: [ v2.84 ] 42 sec
Get loader info...
update required
Get Tecno/2023-11 [luci]
Install...
Ok
DA selected: Tecno | 2023-11 [luci] | MTK_AllInOne_DA_TCN_V6.933c881f.bin | auth_sv5.auth
MT6983 HWc: 0x8A00
MT6789 HWc: 0x8A00
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth accepted
Challenge...
not used
Agent:
[8e9b0dbf] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\MTK_AllInOne_DA_TCN_V6.933c881f.bin
[f835e4ca] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\auth_sv5.auth
Looking for bootchain in DA...
Selected DA incompatible with MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717
Try with default DA?
Yes
Switch to v2404
[df6e006e] C:\InfinityBox\CM2MT2\boot\0_base\base_v2404\MTK_AllInOne_DA.1121d1c5.bin
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 255 generic
Sending DA1...
port reset(1)...
Fail
DA1 send error: [0x00007024] secure boot: SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE [1|1|-1|0]
Cert/Auth required. Try to boot device in PRELOADER mode and select PL/PL_CRYPTO/SWSEC DA
Loading data...
How to boot infinix/tecno/itel read here:
sec. patch 2023|2024 [MTK sec 2023/2024] - Infinity Box Dongle [CM2] [BEST] Support
sec. patch 2024|2025 #CM2MT2 tecno/infinix/itel 2024/2025 reset FRP and ADB On - Infinity Box Dongle [CM2] [BEST] Support
How to get new DA #CM2MT2 #CM2SP3 boot-pack - Infinity Box Dongle [CM2] [BEST] Support
Change USB cable and USB port, do not use USB-hub
Latest SoC drivers or PC REBOOT may helps
Stop: Identify [ v2.84 ] 54 sec
Preloader/EMI: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.bin
EMI MT6761 preloader_bf7n_h6127.bin with 4 memory types [aaf07751] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth accepted
Challenge...
not used
Agent:
[8e9b0dbf] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\MTK_AllInOne_DA_TCN_V6.933c881f.bin
[f835e4ca] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\auth_sv5.auth
[aaf07751] C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.aaf07751.aaf07751.bin
Looking for bootchain in DA...
Selected DA incompatible with MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717
Try with default DA?
No
You may try to select another model or DA
Another USB cable and USB port may helps
Stop: Identify [ v2.84 ] 11 sec
DA files missing
Select another Device from list or Click to [Get boot files]
Get loader info...
update required
Get Tecno/BF7
Install...
Ok
Get loader info...
Ok
DA selected: Tecno | BF7 | MTK_AllInOne_DA_v2401.dec5.39b336e8.bin | auth_sv5_24.auth | preloader_bf7_h6127.bin
MTK_AllInOne_DA_v2310.bf41
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
MTK_AllInOne_DA_v2312.bf41
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
MTK_AllInOne_DA_v2401.dec5
MT6739, MT6761, MT6763, MT6765, MT6768
DA_BR_MT6833.c8d9
MT6833
4 DA available, try it one-by-one
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth|Cert not accepted by device
Set [Connect] -> Local SLA [On]
Set [Connect] -> Auto-EMI [On]
Stop: Identify [ v2.84 ] 766 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
libusb() warn drivers|filters fault?
Run libusb installer and delete all filters or reinstall libusb
Stop: Identify [ v2.84 ] 1 sec
SoC supported: MT6580/6735/6737/6739/6752/6753/6761/6763/6765/6768/6771
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth|Cert not accepted by device
Set [Connect] -> Local SLA [On]
Set [Connect] -> Auto-EMI [On]
Stop: Identify [ v2.84 ] 703 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
libusb() warn drivers|filters fault?
Run libusb installer and delete all filters or reinstall libusb
Stop: Identify [ v2.84 ] 1 sec
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Fail
Change USB cable and USB port, do not use USB-hub
Latest SoC drivers or PC REBOOT may helps
Stop: Identify [ v2.84 ] 20 sec
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
v1.2.6.0
configure libusb...
Ok
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 12 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 984 us
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup 51 items to C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\
Read [seccfg]
Ok 375 us
Read [nvram]
Ok 2 sec
Read [nvdata]
Ok 2 sec
Read [proinfo]
Ok 156 us
Read [nvcfg]
Ok 1 sec
Read [protect1]
Ok 359 us
Read [pgpt]
Ok 31 us
Read [persist]
Ok 2 sec
Read [preloader]
Ok 203 us
Skip zeroes file: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\preloader.bin
Read [lk_a]
Ok 141 us
Read [lk_b]
Ok 125 us
probe files...
Done 10 files 13 sec
Compress: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Enough [tecno-bf7-bf7-gl]
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 58 sec
=> Keep connection
Start: [MemTool] Memory Read [ v2.84 ]
Read 1 partitions to C:\InfinityBox\CM2MT2\phdata\
Read [preloader]
Ok
File has only zeroes
Stop: [MemTool] Memory Read [ v2.84 ] 2 sec
=> Keep connection
Start: [MemTool] Memory Write [ v2.84 ]
Select at least one partition!
Stop: [MemTool] Memory Write [ v2.84 ] 672 us
=> Keep connection
Start: Reboot [ v2.84 ]
Reset port...
Trying to reboot...
Stop: Reboot [ v2.84 ] 31 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 8 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 1 sec
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 32 sec
=> Keep connection
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 13 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 1 sec
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 36 sec
=> Keep connection
Start: Read [ v2.84 ]
Destination: E:\fb7n\
Disk free space: 180.86 Gb
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Device support slots:
Scheme v2 w/super
Active slot: a
Total size to read: 6.73 Gb
Read [1/53]: preloader.bin 4.00 Mb
Ok
Read fail: preloader
Device may have damaged (useless) firmware.
Do you want to Ignore error and Continue?
Yes
Read [4/53]: proinfo.img 3.00 Mb
Ok
Ok 3.00 Mb
Read [15/53]: persist.img 48.00 Mb
Ok
Sparse...
blocks: 12288
compression ratio: 98% 704 us
Ok 1.30 Mb
Read [16/53]: sec.img 2.00 Mb
Ok
Read [17/53]: nvram.bin 70.00 Mb
Ok
Ok 69.88 Mb
Read [18/53]: md1rom_a.img 100.00 Mb
Ok
Ok 48.83 Mb
Read [19/53]: spmfw_a.img 1024.00 Kb
Ok
Ok 62.98 Kb
Read [20/53]: tinysys-scp_a.bin 1024.00 Kb
Ok
Ok 556.44 Kb
Estimated time to end 7 min 40 sec
Read [21/53]: sspm_a.img 1024.00 Kb
Ok
Ok 432.42 Kb
Read [22/53]: gz_a.img 16.00 Mb
Ok
Read [23/53]: lk_a.bin 2.00 Mb
Ok
Ok 986.38 Kb
Read [24/53]: logo_a.bin 8.00 Mb
Ok
Ok 1.50 Mb
Read [25/53]: boot_a.img 32.00 Mb
Ok
Ok 32.00 Mb
Read [26/53]: vendor_boot_a.img 64.00 Mb
Ok
Read [27/53]: dtbo_a.img 8.00 Mb
Ok
Ok 8.00 Mb
Read [28/53]: tz_a.img 5.00 Mb
Ok
Ok 863.34 Kb
Read [29/53]: tkv_a.img 2.00 Mb
Ok
Ok 64.00 Kb
Read [30/53]: vbmeta_a.img 8.00 Mb
Ok
Ok 3.80 Kb
Read [31/53]: vbmeta_system_a.img 8.00 Mb
Ok
Ok 2.16 Kb
Read [32/53]: vbmeta_vendor_a.img 8.00 Mb
Ok
Ok 1.63 Kb
Read [33/53]: md1rom_b.img 100.00 Mb
Ok
Ok 48.88 Mb
Read [34/53]: spmfw_b.img 1024.00 Kb
Ok
Read [35/53]: tinysys-scp_b.bin 1024.00 Kb
Ok
Read [36/53]: sspm_b.img 1024.00 Kb
Ok
Read [37/53]: gz_b.img 16.00 Mb
Ok
Read [38/53]: lk_b.bin 2.00 Mb
Ok
Ok 986.78 Kb
Read [39/53]: logo_b.bin 8.00 Mb
Ok
Ok 1.50 Mb
Read [40/53]: boot_b.img 32.00 Mb
Ok
Ok 32.00 Mb
Read [41/53]: vendor_boot_b.img 64.00 Mb
Ok
Read [42/53]: dtbo_b.img 8.00 Mb
Ok
Ok 8.00 Mb
Read [43/53]: tz_b.img 7.00 Mb
Ok
Read [44/53]: super.img 6.09 Gb
Ok
Ok
Read [45/53]: tkv_b.img 7.13 Mb
Ok
Read [46/53]: vbmeta_b.img 8.00 Mb
Ok
Read [47/53]: vbmeta_system_b.img 8.00 Mb
Ok
Read [48/53]: vbmeta_vendor_b.img 8.00 Mb
Ok
Build [49/53]: tranfs.img 304.00 Mb
Create partition image...
Make filesystem [ext4]...
Ok
Ok
Ok 0
Build [50/53]: userdata.img 50.33 Gb
Create partition image...
Make filesystem [f2fs]...
Ok
Ok
Ok 0
Compact...
Build scat...
Unknown preloader structure
Ok
Firmware size: 6.34 Gb
Scatter: MT6761_Android_scatter.txt
Saved: E:\fb7n\MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127\
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Upload file to server?
Yes
Stop: Read [ v2.84 ] 5 min 25 sec
=> Keep connection
Load: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\MT6761_Android_scatter.txt
EMI MT6761 preloader_bf7n_h6127.bin with 4 memory types [aaf07751] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Product Brand: TECNO-Mobile
Product Device: TECNO-Mobile-BF7n
Product Model: TECNO Mobile BF7n
Product Name: BF7n-EU
SW: TECNO-Mobile/BF7n-EU/TECNO-Mobile-BF7n:12/SP1A.210812.016/230324V652:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7n-H6127O-S-EU-200101V1
SW Version: 230324V652
Ver. CodeName: REL
Sec. Patch: 2023-03-05
Build Time: 3/23/2023 9:22:26 PM
Product Info: bf7n_h6127
SW: vnd_bf7n_h6127-user 12 SP1A.210812.016 282588 release-keys
Product Manfct: TECNO MOBILE
Product Board: TECNO-Mobile-BF7n
Board Platform: mt6761
Device ID: tecno-mobile-bf7n-bf7n-eu
Strategy: [tecno]
Firmware ID: MT6761_TECNO_MOBILE_TECNO_Mobile_BF7n_OSv12_BF7n-H6127O-S-EU-200101V1_SP1A.210812.016_bf7n_h6127_TECNO-Mobile
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Anti-crack feature: Off
[preloader] write Off
Verify firmware [MT6761_TECNO_MOBILE_TECNO_Mobile_BF7n_OSv12_BF7n-H6127O-S-EU-200101V1_SP1A.210812.016_bf7n_h6127_TECNO-Mobile]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Upload file to server?
No
=> Keep connection
Start: Write FW [ v2.84 ]
FLASH ERASE: Off; Pre-Erase: On; Checksum Verify: Off
Re-Partition: On; Check compatibility: On; Backup: On
Files: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\
1 files 239.25 Kb
HW verification...
Ok
Get 1st partition table...
Ok 16 us
GPT Ok
Partition table: PGPT 50 entries
Verify [DA] data...
Ok 1 sec
Verify PMT...
Scat|PMT: start address mismatch
Firmware may be incompatible with the device,
It may be for another Region or previous flash attempt fail
Partition Table should be updated, device security may be damaged
Continue?
Yes
In case of issues restore security backup after flash
Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Unknown [preloader] structure
Unknown [preloader_backup] structure
Verify SEC DL...
Pre-Erase...
9 areas
Erase: 0x0000000000000000 0x0000000000108000
Erase: 0x0000000000408000 0x0000000001580000
Erase: 0x0000000003988000 0x000000000769A000
Erase: 0x0000000010000000 0x0000000000200000
Erase: 0x000000001AF00000 0x0000000001000000
Erase: 0x000000001E900000 0x0000000004000000
Erase: 0x0000000025000000 0x0000000007900000
Erase: 0x000000002D100000 0x0000000006F00000
Erase: 0x00000001D8126000 0x0000000001EDA000
Update PMT...
Ok
Flash write, ultra-method(a): On
Write [preloader] C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.bin
Ok
RePartition...
Ok
Stop: Write FW [ v2.84 ] 31 sec
=> Keep connection
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
Break
Stop: Identify [ v2.84 ] 2 min 56 sec
=== [2025-06-04_00-04-09 C:\InfinityBox\CM2MT2\CM2MT2.exe] ===
CM2 - MT2 Service Tool v2.84
Probe UAC...
Ok
Wait...
S/N: 004F013B9D v0166
Initalize log engine...
Ok
Build directories tree...
Ok
Backup files: C:\InfinityBox\CM2MT2\backup\
Backup files: 1 dirs: 0
Load EMI database...
28 records
Load IDBase v915508 Ok
Build device list...
Ok
Load 173 profiles...
Ok
Init filesystem tools...
Ok
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
Do you want to read manual?
No
Ready
DA selected: Tecno | -soc-Dimensity-9000 | DA_BR.13372eec.bin | auth_sv5.auth
DA files missing
Select another Device from list or Click to [Get boot files]
Stop: [ v2.84 ] 42 sec
Get loader info...
update required
Get Tecno/2023-11 [luci]
Install...
Ok
DA selected: Tecno | 2023-11 [luci] | MTK_AllInOne_DA_TCN_V6.933c881f.bin | auth_sv5.auth
MT6983 HWc: 0x8A00
MT6789 HWc: 0x8A00
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: On
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth accepted
Challenge...
not used
Agent:
[8e9b0dbf] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\MTK_AllInOne_DA_TCN_V6.933c881f.bin
[f835e4ca] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\auth_sv5.auth
Looking for bootchain in DA...
Selected DA incompatible with MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717
Try with default DA?
Yes
Switch to v2404
[df6e006e] C:\InfinityBox\CM2MT2\boot\0_base\base_v2404\MTK_AllInOne_DA.1121d1c5.bin
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 255 generic
Sending DA1...
port reset(1)...
Fail
DA1 send error: [0x00007024] secure boot: SELECTED DA NOT SUPPORTED IN CURRENT DEVICE STATE [1|1|-1|0]
Cert/Auth required. Try to boot device in PRELOADER mode and select PL/PL_CRYPTO/SWSEC DA
Loading data...
How to boot infinix/tecno/itel read here:
sec. patch 2023|2024 [MTK sec 2023/2024] - Infinity Box Dongle [CM2] [BEST] Support
sec. patch 2024|2025 #CM2MT2 tecno/infinix/itel 2024/2025 reset FRP and ADB On - Infinity Box Dongle [CM2] [BEST] Support
How to get new DA #CM2MT2 #CM2SP3 boot-pack - Infinity Box Dongle [CM2] [BEST] Support
Change USB cable and USB port, do not use USB-hub
Latest SoC drivers or PC REBOOT may helps
Stop: Identify [ v2.84 ] 54 sec
Preloader/EMI: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.bin
EMI MT6761 preloader_bf7n_h6127.bin with 4 memory types [aaf07751] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth accepted
Challenge...
not used
Agent:
[8e9b0dbf] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\MTK_AllInOne_DA_TCN_V6.933c881f.bin
[f835e4ca] C:\InfinityBox\CM2MT2\boot\Tecno\2023-11 [luci]\auth_sv5.auth
[aaf07751] C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.aaf07751.aaf07751.bin
Looking for bootchain in DA...
Selected DA incompatible with MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717
Try with default DA?
No
You may try to select another model or DA
Another USB cable and USB port may helps
Stop: Identify [ v2.84 ] 11 sec
DA files missing
Select another Device from list or Click to [Get boot files]
Get loader info...
update required
Get Tecno/BF7
Install...
Ok
Get loader info...
Ok
DA selected: Tecno | BF7 | MTK_AllInOne_DA_v2401.dec5.39b336e8.bin | auth_sv5_24.auth | preloader_bf7_h6127.bin
MTK_AllInOne_DA_v2310.bf41
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
MTK_AllInOne_DA_v2312.bf41
MT6739, MT6761, MT6763, MT6765, MT6768, MT6781, MT6785, MT6833, MT6877, MT6893
MTK_AllInOne_DA_v2401.dec5
MT6739, MT6761, MT6763, MT6765, MT6768
DA_BR_MT6833.c8d9
MT6833
4 DA available, try it one-by-one
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth|Cert not accepted by device
Set [Connect] -> Local SLA [On]
Set [Connect] -> Auto-EMI [On]
Stop: Identify [ v2.84 ] 766 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
libusb() warn drivers|filters fault?
Run libusb installer and delete all filters or reinstall libusb
Stop: Identify [ v2.84 ] 1 sec
SoC supported: MT6580/6735/6737/6739/6752/6753/6761/6763/6765/6768/6771
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: Both [ B + P ]; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: Off; Auto-EMI: Off
Power device Off and connect cable now
Remember Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Sending Auth
Auth|Cert not accepted by device
Set [Connect] -> Local SLA [On]
Set [Connect] -> Auto-EMI [On]
Stop: Identify [ v2.84 ] 703 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
It looks like libusb0.dll is not installed or damaged
Reinstall libusb, read libusb - Infinity Box Dongle [CM2] [BEST] Support
libusb() warn drivers|filters fault?
Run libusb installer and delete all filters or reinstall libusb
Stop: Identify [ v2.84 ] 1 sec
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Fail
Change USB cable and USB port, do not use USB-hub
Latest SoC drivers or PC REBOOT may helps
Stop: Identify [ v2.84 ] 20 sec
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
init libusb...
v1.2.6.0
configure libusb...
Ok
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 12 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 984 us
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup 51 items to C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\
Read [seccfg]
Ok 375 us
Read [nvram]
Ok 2 sec
Read [nvdata]
Ok 2 sec
Read [proinfo]
Ok 156 us
Read [nvcfg]
Ok 1 sec
Read [protect1]
Ok 359 us
Read [pgpt]
Ok 31 us
Read [persist]
Ok 2 sec
Read [preloader]
Ok 203 us
Skip zeroes file: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\preloader.bin
Read [lk_a]
Ok 141 us
Read [lk_b]
Ok 125 us
probe files...
Done 10 files 13 sec
Compress: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl\
Ok
Verify C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Enough [tecno-bf7-bf7-gl]
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 58 sec
=> Keep connection
Start: [MemTool] Memory Read [ v2.84 ]
Read 1 partitions to C:\InfinityBox\CM2MT2\phdata\
Read [preloader]
Ok
File has only zeroes
Stop: [MemTool] Memory Read [ v2.84 ] 2 sec
=> Keep connection
Start: [MemTool] Memory Write [ v2.84 ]
Select at least one partition!
Stop: [MemTool] Memory Write [ v2.84 ] 672 us
=> Keep connection
Start: Reboot [ v2.84 ]
Reset port...
Trying to reboot...
Stop: Reboot [ v2.84 ] 31 us
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 8 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 1 sec
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 32 sec
=> Keep connection
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
[ BOOTROM #6 ] MediaTek USB Port_V1632 (COM6)
Waiting for boot Ack...
Boot Init...
Ok
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0200 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
Sec Level: 0x000000E5; Mode: SBC+SDA+EXT
BROM ver: 0x05; BL ver: 0xFE; [BOOTROM]
SoC support by Boot [FF] FireFly: Yes
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
SLA: Local Auth
Start Auth...
Ok
Continue Auth...
Ok
SLA: Start
0x15
Auth Passed; SEC: 0x000000E0
Agent:
[15946d6d] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\MTK_AllInOne_DA_v2401.dec5.39b336e8.bin
[bd322c2c] C:\InfinityBox\CM2MT2\boot\Tecno\2024-08\auth_sv5_24.auth
[90781b98] C:\InfinityBox\CM2MT2\boot\Tecno\BF7\preloader_bf7_h6127.bin
Looking for bootchain in DA...
Found: MT6761; DA: MTK_DOWNLOAD_AGENT
Vendor ID: 5 transsion
Sending DA1...
Ok [1|0|0|0]
Jump to DA...
Ok
Sync...
Ok
DA sync...
Ok
Set PowerKey...
Ok
Set PowerSource...
Ok
Set ChecksumLevel [both]...
Ok
DA Set Params...
Ok
Mode: BROM EXT_RAM NOT initialized
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
Init EMI via preloader_bf7_h6127.bin
EMI MT6761 preloader_bf7_h6127.bin with 6 memory types [90781b98] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
5. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 4.00 Gb
6. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Push EMI...
EXT_RAM CFG Passed
Boot DA2...
Ok [1|0|0|0]
DA Sync...
Ok
Get hardware info...
SRAM: 0x0003A600 233.50 Kb
DRAM: 0x100000000 4.00 Gb
EMMC CID: D6010341334135363112B85534D01A4B crc Ok
Vendor: Foresee OEM: 0x0103 ID: 413341353631 [A3A561] PRV: 0x12
Serial: 3092591824 0xB85534D0
MM/YY: 1/2023
BOOT1: 0x00400000 4.00 Mb
BOOT2: 0x00400000 4.00 Mb
RPMB: 0x01000000 16.00 Mb
USER: 0xE67800000 57.62 Gb
MT6761 HWs: 0x8A00 HWv: 0xCA01 HWc: 0x0717 SWv: 0x0000 Evo: 0x0000 Merlot|A20|A22
Type: MODERN [RAPHAEL]
RNID: 3B2B4166EC7F1B63D40917CA85291CFB
MEID: 7882CCBEB99D5C0F8280088A5A9501AD
SOCID: 7C225E3B04A8EA8E4F9DF25D87BFDACDA952057E953240EB6F3B459C6902B825
USB: HIGH-SPEED
SoC drivers: MediaTek USB Port_V1632 v3.0.1504.0
Boot done 13 sec Adjusted: Yes, Allow errors: Yes, Collision: 666|6
da3 da init nOk (send) UNSUPPORT CMD
EMMC Life State: Ok
EMMC RPMB State: RPMB Key programmed [UNUSABLE]
rpmb engine: Off
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Read [preloader]...
Ok
Unknown [preloader] structure
Read [preloader_backup]...
Ok
Unknown [preloader_backup] structure
Probe LK...
lk_a [0e9724a1] bf7_h6127-50ef47c2d-20230821163925-20230822045859
Get slot info...
Active slot(v3): a
Probe boot...
vendor_boot_a;ramsidk size=0;boot_a;gzip;ramdisk size 28.41 Mb;3 found;
Ok 1 sec
Probe vbmeta...
Ok 2 sec
Product Brand: TECNO
Product Device: TECNO-BF7
Product Model: TECNO BF7
Product Name: BF7-GL
SW: TECNO/BF7-GL/TECNO-BF7:12/SP1A.210812.016/230822V1327:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327
SW Version: 230822V1327
Ver. CodeName: REL
Sec. Patch: 2023-07-05
Build Time: 8/21/2023 8:50:51 PM
Product Info: bf7_h6127
SW: vnd_bf7_h6127-user 12 SP1A.210812.016 409861 release-keys
Product Manfct: TECNO
Product Board: TECNO-BF7
Board Platform: mt6761
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Probe userdata...
Load userdata...
Ok
userData: [FS unknown|raw] encrypted
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Load nvram...
NVRAM: 151 items; State: Ok
WiFi MAC: AA:00:6E:74:2F:76
BT MAC: 00:00:46:00:00:01
IMEI1: 359223742328532
IMEI2: 359223742328540
PSN: N/A
get modem info...
TK_MD_L4_MDBIN_PCB01_MT6761_S00.MOLY_LR12A_R3_MP_V241_4_P21
Secondary RPMB...
Off
Probe FRP...
Most probably Off
Probe bootloader...
Seems as locked
Verify [DA] data...
Ok 1 sec
Stop: Identify [ v2.84 ] 36 sec
=> Keep connection
Start: Read [ v2.84 ]
Destination: E:\fb7n\
Disk free space: 180.86 Gb
Get 1st partition table...
Ok 15 us
GPT Ok
Partition table: PGPT 50 entries
Device ID: tecno-bf7-bf7-gl
Strategy: [tecno]
Firmware ID: MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Device support slots:
Scheme v2 w/super
Active slot: a
Total size to read: 6.73 Gb
Read [1/53]: preloader.bin 4.00 Mb
Ok
Read fail: preloader
Device may have damaged (useless) firmware.
Do you want to Ignore error and Continue?
Yes
Read [4/53]: proinfo.img 3.00 Mb
Ok
Ok 3.00 Mb
Read [15/53]: persist.img 48.00 Mb
Ok
Sparse...
blocks: 12288
compression ratio: 98% 704 us
Ok 1.30 Mb
Read [16/53]: sec.img 2.00 Mb
Ok
Read [17/53]: nvram.bin 70.00 Mb
Ok
Ok 69.88 Mb
Read [18/53]: md1rom_a.img 100.00 Mb
Ok
Ok 48.83 Mb
Read [19/53]: spmfw_a.img 1024.00 Kb
Ok
Ok 62.98 Kb
Read [20/53]: tinysys-scp_a.bin 1024.00 Kb
Ok
Ok 556.44 Kb
Estimated time to end 7 min 40 sec
Read [21/53]: sspm_a.img 1024.00 Kb
Ok
Ok 432.42 Kb
Read [22/53]: gz_a.img 16.00 Mb
Ok
Read [23/53]: lk_a.bin 2.00 Mb
Ok
Ok 986.38 Kb
Read [24/53]: logo_a.bin 8.00 Mb
Ok
Ok 1.50 Mb
Read [25/53]: boot_a.img 32.00 Mb
Ok
Ok 32.00 Mb
Read [26/53]: vendor_boot_a.img 64.00 Mb
Ok
Read [27/53]: dtbo_a.img 8.00 Mb
Ok
Ok 8.00 Mb
Read [28/53]: tz_a.img 5.00 Mb
Ok
Ok 863.34 Kb
Read [29/53]: tkv_a.img 2.00 Mb
Ok
Ok 64.00 Kb
Read [30/53]: vbmeta_a.img 8.00 Mb
Ok
Ok 3.80 Kb
Read [31/53]: vbmeta_system_a.img 8.00 Mb
Ok
Ok 2.16 Kb
Read [32/53]: vbmeta_vendor_a.img 8.00 Mb
Ok
Ok 1.63 Kb
Read [33/53]: md1rom_b.img 100.00 Mb
Ok
Ok 48.88 Mb
Read [34/53]: spmfw_b.img 1024.00 Kb
Ok
Read [35/53]: tinysys-scp_b.bin 1024.00 Kb
Ok
Read [36/53]: sspm_b.img 1024.00 Kb
Ok
Read [37/53]: gz_b.img 16.00 Mb
Ok
Read [38/53]: lk_b.bin 2.00 Mb
Ok
Ok 986.78 Kb
Read [39/53]: logo_b.bin 8.00 Mb
Ok
Ok 1.50 Mb
Read [40/53]: boot_b.img 32.00 Mb
Ok
Ok 32.00 Mb
Read [41/53]: vendor_boot_b.img 64.00 Mb
Ok
Read [42/53]: dtbo_b.img 8.00 Mb
Ok
Ok 8.00 Mb
Read [43/53]: tz_b.img 7.00 Mb
Ok
Read [44/53]: super.img 6.09 Gb
Ok
Ok
Read [45/53]: tkv_b.img 7.13 Mb
Ok
Read [46/53]: vbmeta_b.img 8.00 Mb
Ok
Read [47/53]: vbmeta_system_b.img 8.00 Mb
Ok
Read [48/53]: vbmeta_vendor_b.img 8.00 Mb
Ok
Build [49/53]: tranfs.img 304.00 Mb
Create partition image...
Make filesystem [ext4]...
Ok
Ok
Ok 0
Build [50/53]: userdata.img 50.33 Gb
Create partition image...
Make filesystem [f2fs]...
Ok
Ok
Ok 0
Compact...
Build scat...
Unknown preloader structure
Ok
Firmware size: 6.34 Gb
Scatter: MT6761_Android_scatter.txt
Saved: E:\fb7n\MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127\
Verify firmware [MT6761_TECNO_TECNO_BF7_OSv12_BF7-H6127ABCDSTUAdAeAfArAs-S-GL-230822V1327_SP1A.210812.016_bf7_h6127]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Upload file to server?
Yes
Stop: Read [ v2.84 ] 5 min 25 sec
=> Keep connection
Load: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\MT6761_Android_scatter.txt
EMI MT6761 preloader_bf7n_h6127.bin with 4 memory types [aaf07751] slots: yes
1. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 512.00 Mb
2. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
3. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
4. DRAM LP_DDR4X ID: NOT_DEFINED RAM: 3.00 Gb
Product Brand: TECNO-Mobile
Product Device: TECNO-Mobile-BF7n
Product Model: TECNO Mobile BF7n
Product Name: BF7n-EU
SW: TECNO-Mobile/BF7n-EU/TECNO-Mobile-BF7n:12/SP1A.210812.016/230324V652:user/release-keys
Patch Level: SP1A.210812.016
Display ID: BF7n-H6127O-S-EU-200101V1
SW Version: 230324V652
Ver. CodeName: REL
Sec. Patch: 2023-03-05
Build Time: 3/23/2023 9:22:26 PM
Product Info: bf7n_h6127
SW: vnd_bf7n_h6127-user 12 SP1A.210812.016 282588 release-keys
Product Manfct: TECNO MOBILE
Product Board: TECNO-Mobile-BF7n
Board Platform: mt6761
Device ID: tecno-mobile-bf7n-bf7n-eu
Strategy: [tecno]
Firmware ID: MT6761_TECNO_MOBILE_TECNO_Mobile_BF7n_OSv12_BF7n-H6127O-S-EU-200101V1_SP1A.210812.016_bf7n_h6127_TECNO-Mobile
Android ver: 12
UserDataFS: [f2fs] FBE [file based encryption] CacheFS: [ext4]
Anti-crack feature: Off
[preloader] write Off
Verify firmware [MT6761_TECNO_MOBILE_TECNO_Mobile_BF7n_OSv12_BF7n-H6127O-S-EU-200101V1_SP1A.210812.016_bf7n_h6127_TECNO-Mobile]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Upload file to server?
No
=> Keep connection
Start: Write FW [ v2.84 ]
FLASH ERASE: Off; Pre-Erase: On; Checksum Verify: Off
Re-Partition: On; Check compatibility: On; Backup: On
Files: C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\
1 files 239.25 Kb
HW verification...
Ok
Get 1st partition table...
Ok 16 us
GPT Ok
Partition table: PGPT 50 entries
Verify [DA] data...
Ok 1 sec
Verify PMT...
Scat|PMT: start address mismatch
Firmware may be incompatible with the device,
It may be for another Region or previous flash attempt fail
Partition Table should be updated, device security may be damaged
Continue?
Yes
In case of issues restore security backup after flash
Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6761__7882CCBEB99D5C0F8280088A5A9501AD_tecno-bf7-bf7-gl.7z
Unknown [preloader] structure
Unknown [preloader_backup] structure
Verify SEC DL...
Pre-Erase...
9 areas
Erase: 0x0000000000000000 0x0000000000108000
Erase: 0x0000000000408000 0x0000000001580000
Erase: 0x0000000003988000 0x000000000769A000
Erase: 0x0000000010000000 0x0000000000200000
Erase: 0x000000001AF00000 0x0000000001000000
Erase: 0x000000001E900000 0x0000000004000000
Erase: 0x0000000025000000 0x0000000007900000
Erase: 0x000000002D100000 0x0000000006F00000
Erase: 0x00000001D8126000 0x0000000001EDA000
Update PMT...
Ok
Flash write, ultra-method(a): On
Write [preloader] C:\Users\pir\Downloads\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\BF7n-H6127O-S-EU-230326V978(MobiFirmware.com)\Firmware\preloader_bf7n_h6127.bin
Ok
RePartition...
Ok
Stop: Write FW [ v2.84 ] 31 sec
=> Keep connection
Start: Identify [ v2.84 ]
Protocol: Boot [DA] Factory
Port: BROM Only; Force BROM: Off; USB High-Speed: On
DA Key: custom; L-SLA: On; Auto-EMI: Off
Power device Off and connect cable now
Use Volume Up/Down or Test-Point
Waiting for device...
Break
Stop: Identify [ v2.84 ] 2 min 56 sec
