Connection status: XHCI:HUB3[#3]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8841-8055
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... CMD not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---
Interface: UFI High-Speed
Serial number: 0011-8841-8055
Boot version: 1.05, FW version: 1.15 (Nov 8 2022 18:51:23)
Insertion test... CMD not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Failed to initialize eMMC (return code: 17, CMD Error: Timeout) !!!
CMD1 error, cmd response: 0x0, card state: 255 (Card is in unknown state)
SEND_OP_COND command failed.
--- Check eMMC pins and connection ---
--- Try to select correct VCC/VCCQ manually ---
--- Try to decrease the clock speed ---