(Consumed 90% of the reserved block)

zyran

Junior Member
 : Jun 6, 2020
 : 3
 : 0
 :  phillipines
Connection status: XHCI:HUB3:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8842-2247
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... CLK not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0xC758714B
Manufacturing date: Sep 2018
CID: 90014A48 41473461 32A5C758 714B95B6
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4096 KiB
Boot2: 4096 KiB
RPMB: 4096 KiB
User area: 14.68 GiB(15,758,000,128 bytes)
Cache size: 1 MiB
Hardware reset function: 1
Partition configuration: 0x38
No boot acknowledge is sent (default)
User area is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning completed
Boot configuration protection: 0x00
Boot bus conditions: 0x00
Boot area write protection: 0x00
Power-on write protection: possible
Permanent write protection: possible
Lock status: not locked
User area write protection: 0x50
Password protection features: enabled
Power-on write protection: possible
Permanent write protection: not possible
Lock status: not locked
eMMC 5.x HEALTH report:
Device lifetime: Urgent (Consumed 90% of the reserved block)
Estimation of the device lifetime (SLC): 0% - 10% device life time used
Estimation of the device lifetime (MLC): Exceeded its maximum estimated device life time
Selected: [HYNIX] H9TQ17ADFTACUR/16GB+LPDDR3 24Gb (BGA221)
 

Ahmadaim1

Product Supporter
 : Aug 10, 2018
 : 193
 : 98
 :  Nigeria
What is phone model? From your log show that your phone is using Qualcomm chip!


The steps are
Goto userimage
Backup security files


Back to main interface
Factory reset
Erase

Tab emmc repartition interface
Tick all boxes
Write partition

Tab main interface
Write dump or goto factory image write vendor
Full flash with usb if dump is not full