Connection status: EHCI:HUB:HUB[#2]:USB 2.00 High-Speed
Interface: UFI High-Speed
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x3D49E60A
Manufacturing date: Feb 2019
CID: 90014A48 41473461 32A53D49 E60A2680
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
Device version: 0x4105
Firmware version: 0xA5
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 137462]
User area: 14.68 GiB(15,758,000,128 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\OPPO\HAG4a2_3D49E60A\ext_csd.bin" (CRC32: 0xA5A599AD)
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Failed to read block 0x00020000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Failed to read block 0x00000000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Current partition access:
Access to user area
Reading userarea, size: 128 MiB... Failed to read block 0x00000000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Interface: UFI High-Speed
Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)
Insertion test... Done
VCCQ not properly connected
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: HAG4a2 (0x484147346132), rev: 0xA5, serial number: 0x3D49E60A
Manufacturing date: Feb 2019
CID: 90014A48 41473461 32A53D49 E60A2680
CSD: D0270132 8F5903FF FFFFFFE7 8A400016
Device version: 0x4105
Firmware version: 0xA5
EXT_CSD revision: 1.8 (MMC v5.1)
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 4 MiB [Provisioned, counter: 137462]
User area: 14.68 GiB(15,758,000,128 bytes)
Reading extcsd, size: 512 bytes...
File saved to "\OPPO\HAG4a2_3D49E60A\ext_csd.bin" (CRC32: 0xA5A599AD)
Current partition access:
Access to boot partition 1
Reading boot1, size: 4 MiB... Failed to read block 0x00020000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Current partition access:
Access to boot partition 2
Reading boot2, size: 4 MiB... Failed to read block 0x00000000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---
Current partition access:
Access to user area
Reading userarea, size: 128 MiB... Failed to read block 0x00000000:65536 (return code: 36, Transmission Error: Data CRC fail)
cmd response: 0x900, card status: 0x0, card state: 4 (Card is in transfer state)
status: unknown (0)
--- Make sure the connection between BOX and eMMC stable ---
--- please try again (you may RESUME the read process) ---