Operation: Identify Device [ v2.52 ]
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: BROM Only
[+] High-Speed
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Local SLA
[-] Force BROM
Auto backup nvram etc. [On] but SW info [Off]
Enable it? Yes
[+] SW info
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port_V1632 (COM4)
MODE [0]: BOOTROM; PORT: 4
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6779 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0725
CODE: Lafite
TYPE: MODERN [RAPHAEL]
MEID: E3B54369CE22E459842FECF12D6F90AD
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 184933DB69C2A608AFAC46E55AF1F5404AC0E88F315A0A2AFF0BDF40991163C6
SLA: Local Auth
Start Auth... Ok
Continue Auth... libusb exec warn ctrl_msg1 v1.2.6.0 0x0A Ok
EMI known
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: E3B54369CE22E459842FECF12D6F90AD
AGENT: AUTO: 0_base: base_v2316
[1d5fdec4] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable BootChain in DA...
Found: MT6779; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
UFS CID: CE014B4D3856383030314A4D2D423831
Ven: 0x01CE VID: KM8V8001JM-B81 IFW: 1900
EMI: FireFly preloader_oppo6779.bin with 16 memory type(s)
1. eUFS LP_DDR4X Dev: KM2V7001CM-B706 RAM: 6.00 Gb
2. eUFS LP_DDR4X Dev: KM8V7001JA-B813 RAM: 8.00 Gb
3. eMMC LP_DDR4X ID: 90014A68433861503E Hynix hC8aP> RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B39 Micron S0J9K9 RAM: 4.00 Gb
5. eUFS LP_DDR4X Dev: KM8V7001JM-B810 RAM: 8.00 Gb
6. eUFS LP_DDR4X Dev: H9HQ16AECMMDAR RAM: 6.00 Gb
7. eUFS LP_DDR4X Dev: H9HQ16AFAMMDAR RAM: 8.00 Gb
8. eUFS LP_DDR4X Dev: KM2V8001CM-B707 RAM: 6.00 Gb
9. eUFS LP_DDR4X Dev: KM5V7001DM-B621 RAM: 4.00 Gb
10. eUFS LP_DDR4X Dev: KM2B8001CM-BB01 RAM: 6.00 Gb
11. eUFS LP_DDR4X Dev: KM8B8001JM-BC01 RAM: 8.00 Gb
12. eUFS LP_DDR4X Dev: KM8V8001JM-B813 RAM: 8.00 Gb
13. eUFS LP_DDR4X Dev: H9HQ15AFAMBDAR RAM: 8.00 Gb
14. eUFS LP_DDR4X Dev: H9HQ15AECMBDAR RAM: 6.00 Gb
15. eUFS LP_DDR4X Dev: H9HQ21AFAMADAR RAM: 8.00 Gb
16. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 6.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC Ok
Load HW info...
RAM: SRAM: 0x00080000 [ 512.00 Kb ]
RAM: DRAM: 0x200000000 [ 8.00 Gb ]
UFS CID: CE014B4D3856383030314A4D2D423831
Ven: 0x01CE VID: KM8V8001JM-B81 IFW: 1900
LU0: 0x00400000 [ 4.00 Mb ]
LU1: 0x00400000 [ 4.00 Mb ]
LU2: 0x1DCB000000 [ 119.17 Gb ]
FSN: 531ba5619a53
REG: 0x202010000
CHIP: MT6779 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0725
CODE: Lafite
TYPE: MODERN [RAPHAEL]
RNID: 3394D47ED245E762515571028F0A5AC3
MEID: E3B54369CE22E459842FECF12D6F90AD
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 51
Select info source... recovery [4000000] Ok
Product Board: oppo6779
Board Platform: mt6779
Product Brand: alps
Product Device: oppo6779
Product Manfct: alps
Product Model: oppo6779
Product Name: vnd_oppo6779
Strategy: [oppo]
Firmware ID: MT6779_alps_oppo6779.MT6779_CPH2217_export_11_A.21_202103310021
Verify firmware [MT6779_alps_oppo6779.MT6779_CPH2217_export_11_A.21_202103310021]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Analyze userdata...
userData: fileSystem [ext4] with FBE [file based encryption]
Verify config values...
Ok
Loaders Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6779__E3B54369CE22E459842FECF12D6F90AD
Backup already exist. Overwrite? No
Verify C:\InfinityBox\CM2MT2\backup\MT6779__E3B54369CE22E459842FECF12D6F90AD.7z
Exist [3394D47ED245E762515571028F0A5AC3]
STORAGE Life Status: UFS : NOT implemented in selected DA
STORAGE OTP Status: NOT Enabled
STORAGE RPMB Status: UFS : RPMB NOT ENABLED
Reset port...
Trying to reboot...
Done: 00:01:37
Reconnect Power/Cable now
Platform: MTK SmartPhone - MT65/67/68/69/81/83/87 | Helio G/P/X
Mode: FLASH
Port: BROM Only
[+] High-Speed
[+] Auto-EMI
[+] FireFly-Over-DA extended protocol
[+] Local SLA
[-] Force BROM
Auto backup nvram etc. [On] but SW info [Off]
Enable it? Yes
[+] SW info
Wait...
1. Power Off the device
2. Wait 20 seconds
3. Connect USB cable to device [Vol+ | Vol-]
Waiting for device connection...
PTFN: MediaTek USB Port_V1632 (COM4)
MODE [0]: BOOTROM; PORT: 4
Waiting for BOOT ACK...
BROM: Init... Ok
CHIP: MT6779 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0725
CODE: Lafite
TYPE: MODERN [RAPHAEL]
MEID: E3B54369CE22E459842FECF12D6F90AD
BROM: Sec Level: 0x000000E5 Mode: SBC+SDA+EXT
VER: 0x05 BL: 0xFE [BOOTROM]
SOCID: 184933DB69C2A608AFAC46E55AF1F5404AC0E88F315A0A2AFF0BDF40991163C6
SLA: Local Auth
Start Auth... Ok
Continue Auth... libusb exec warn ctrl_msg1 v1.2.6.0 0x0A Ok
EMI known
SLA: Start 0x15
Auth Passed; SEC: 0x000000E0
EMI loaded by MEID: E3B54369CE22E459842FECF12D6F90AD
AGENT: AUTO: 0_base: base_v2316
[1d5fdec4] C:\InfinityBox\CM2MT2\boot\0_base\base_v2316\MTK_AllInOne_DA.1d5fdec4.bin
Looking for suitable BootChain in DA...
Found: MT6779; DA: MTK_DOWNLOAD_AGENT
BROM: Sending 1st DA...
DA sent
Jump to DA... Ok
Sync... Ok
DA: Agent Started
DA: SYNC
MODE: BROM
EXT_RAM NOT initialized
UFS CID: CE014B4D3856383030314A4D2D423831
Ven: 0x01CE VID: KM8V8001JM-B81 IFW: 1900
EMI: FireFly preloader_oppo6779.bin with 16 memory type(s)
1. eUFS LP_DDR4X Dev: KM2V7001CM-B706 RAM: 6.00 Gb
2. eUFS LP_DDR4X Dev: KM8V7001JA-B813 RAM: 8.00 Gb
3. eMMC LP_DDR4X ID: 90014A68433861503E Hynix hC8aP> RAM: 4.00 Gb
4. eMMC LP_DDR4X ID: 13014E53304A394B39 Micron S0J9K9 RAM: 4.00 Gb
5. eUFS LP_DDR4X Dev: KM8V7001JM-B810 RAM: 8.00 Gb
6. eUFS LP_DDR4X Dev: H9HQ16AECMMDAR RAM: 6.00 Gb
7. eUFS LP_DDR4X Dev: H9HQ16AFAMMDAR RAM: 8.00 Gb
8. eUFS LP_DDR4X Dev: KM2V8001CM-B707 RAM: 6.00 Gb
9. eUFS LP_DDR4X Dev: KM5V7001DM-B621 RAM: 4.00 Gb
10. eUFS LP_DDR4X Dev: KM2B8001CM-BB01 RAM: 6.00 Gb
11. eUFS LP_DDR4X Dev: KM8B8001JM-BC01 RAM: 8.00 Gb
12. eUFS LP_DDR4X Dev: KM8V8001JM-B813 RAM: 8.00 Gb
13. eUFS LP_DDR4X Dev: H9HQ15AFAMBDAR RAM: 8.00 Gb
14. eUFS LP_DDR4X Dev: H9HQ15AECMBDAR RAM: 6.00 Gb
15. eUFS LP_DDR4X Dev: H9HQ21AFAMADAR RAM: 8.00 Gb
16. DRAM LP_DDR4X ID: NOT_DEFINED Unknown 0x0000 RAM: 6.00 Gb
Push EMI... EXT_RAM CFG Passed
DA: Boot to 2nd DA...
2nd stage confirmed
DA: SYNC Ok
Load HW info...
RAM: SRAM: 0x00080000 [ 512.00 Kb ]
RAM: DRAM: 0x200000000 [ 8.00 Gb ]
UFS CID: CE014B4D3856383030314A4D2D423831
Ven: 0x01CE VID: KM8V8001JM-B81 IFW: 1900
LU0: 0x00400000 [ 4.00 Mb ]
LU1: 0x00400000 [ 4.00 Mb ]
LU2: 0x1DCB000000 [ 119.17 Gb ]
FSN: 531ba5619a53
REG: 0x202010000
CHIP: MT6779 SBID: 0x8A00 HWVR: 0xCA01 SWVR: 0x0000 EVOL: 0x0000 HWC: 0x0725
CODE: Lafite
TYPE: MODERN [RAPHAEL]
RNID: 3394D47ED245E762515571028F0A5AC3
MEID: E3B54369CE22E459842FECF12D6F90AD
USB: HIGH-SPEED
Boot done MODERN [RAPHAEL]
Analyze PMT... Ok
PMT: PGPT [0x64] Records: 51
Select info source... recovery [4000000] Ok
Product Board: oppo6779
Board Platform: mt6779
Product Brand: alps
Product Device: oppo6779
Product Manfct: alps
Product Model: oppo6779
Product Name: vnd_oppo6779
Strategy: [oppo]
Firmware ID: MT6779_alps_oppo6779.MT6779_CPH2217_export_11_A.21_202103310021
Verify firmware [MT6779_alps_oppo6779.MT6779_CPH2217_export_11_A.21_202103310021]...
Firmware is unknown
Please upload Flash Files Database - iosFileUploader - Infinity Box Dongle [CM2] [BEST] Support
Analyze userdata...
userData: fileSystem [ext4] with FBE [file based encryption]
Verify config values...
Ok
Loaders Ok
Backup exist: C:\InfinityBox\CM2MT2\backup\MT6779__E3B54369CE22E459842FECF12D6F90AD
Backup already exist. Overwrite? No
Verify C:\InfinityBox\CM2MT2\backup\MT6779__E3B54369CE22E459842FECF12D6F90AD.7z
Exist [3394D47ED245E762515571028F0A5AC3]
STORAGE Life Status: UFS : NOT implemented in selected DA
STORAGE OTP Status: NOT Enabled
STORAGE RPMB Status: UFS : RPMB NOT ENABLED
Reset port...
Trying to reboot...
Done: 00:01:37
Reconnect Power/Cable now
