f11 auto mtk port ,how to salved ?????
onnection status: EHCI:HUB:HUB[#5]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4367
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x4833A2C8
Manufacturing date: Jan 2019
CID: 90014A68 43386150 3E034833 A2C81604
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
Device version: 0x430E
Firmware version: 0x36303030
EXT_CSD revision: 1.8 (MMC v5.1)
Error: RPMB response command failed.
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
platform: mt6771, cpu abi: arm64-v8a
manufacturer: alps
board: oppo6771, name: vnd_oppo6771
brand: alps, model: oppo6771
build id: RP1A.200720.011, version: 11 [Android 11] (RP1A.200720.011 release-keys)
build description: sys_oplus_mssi_64_cn-user 11 RP1A.200720.011 1648824731399 release-keys
crypto state: encrypted?
crypto state: encrypted?
EXT_CSD backup saved to "\hC8aP_4833A2C8.ext_csd"
eMMC selected: [HYNIX] H26M74002HMR/64GB (BGA153)
onnection status: EHCI:HUB:HUB[#5]:USB 2.00 High-Speed
Interface: UFI High-Speed
Serial number: 0011-8840-4367
Boot version: 1.04, FW version: 1.14 (Aug 25 2021 04:56:05)
Insertion test... Done
Init bus...
VCC: 3.3 V, VCCQ: 1.8 V
Bus: 1 bit (SDR 4MHz)
Access mode: sector mode
Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)
Card/BGA: BGA (Discrete embedded) - High density MMC
Manufacturer ID: 0x90 (SK Hynix)
Product name: hC8aP (0x68433861503e), rev: 0x03, serial number: 0x4833A2C8
Manufacturing date: Jan 2019
CID: 90014A68 43386150 3E034833 A2C81604
CSD: D0270032 8F5903FF FFFFFFEF 8E400042
Device version: 0x430E
Firmware version: 0x36303030
EXT_CSD revision: 1.8 (MMC v5.1)
Error: RPMB response command failed.
Partition info:
Boot1: 4 MiB
Boot2: 4 MiB
RPMB: 16 MiB
User area: 58.24 GiB(62,537,072,640 bytes)
Cache size: 2 MiB
Hardware reset function: 1
Secure Write Protect Information: 0x01
Secure Feature support: 0x55
Partition configuration: 0x48
Boot acknowledge is sent during the boot operation
Boot partition 1 is enabled for boot
Partitioning support: 0x07
Device support partitioning feature
Device can have enhanced technological features
Device partitioning possible
Boot configuration protection: 0x00
Boot bus conditions: 0x02
Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)
Boot area write protection: 0x00
platform: mt6771, cpu abi: arm64-v8a
manufacturer: alps
board: oppo6771, name: vnd_oppo6771
brand: alps, model: oppo6771
build id: RP1A.200720.011, version: 11 [Android 11] (RP1A.200720.011 release-keys)
build description: sys_oplus_mssi_64_cn-user 11 RP1A.200720.011 1648824731399 release-keys
crypto state: encrypted?
crypto state: encrypted?
EXT_CSD backup saved to "\hC8aP_4833A2C8.ext_csd"
eMMC selected: [HYNIX] H26M74002HMR/64GB (BGA153)
