Service cost for [Xiaomi] Redmi 6:
XIAOMI_FL(Bootloader Authorization(QC, MTK) - Including Identify, Flashing, SpecialTask): 4 credits
- By default, use brom version 7.1922.6.0 with MTK_AllInOne_DA[1].bin as DA for stable flashing process.
In some cases, if you got STATUS_BROM_CMD_SEND_DA_FAIL or STATUS_EXT_RAM_EXCEPTION error, please retry with MTK_AllInOne_DA[2].bin or MTK_AllInOne_DA[0].bin as DA
- Flashing default cust.img will result with an error STATUS_SEC_IMG_TYPE_MISMATCH or STATUS_SEC_IMG_TOO_LARGE, so it is skipped by default
Please download cust_global.img from https://app.nihaocloud.com/f/86a95a2769cc4d5d8d85/?dl=1 in case you need to flash cust partition
- Please turn off your "Find device" before flashing, bootloader authorization will not work when "Find device" is turned ON.
- Make sure to select the CORRECT phone model and storage type !
- Do not rename the BRAND and MODEL directory !
- Special Tasks are bonus feature, if it needs "Bootloader Authorization" and you pay for authorization not the specific task !!!
- You have to select the CORRECT firmware that match your phone model before Identify !!!
- Make sure that the phone is completely powered off before connecting to PC !
- If you want to flash factory firmware, please identify using official public firmware at first and then flash with factory firmware after identify !
%]
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: cereus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[Micron] S0J9A7 13014E53 304A3941 37xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] QD63MB 15010051 4436334D 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: 2\images
BROM version[1]: 7.1922.6.0
DA: MTK_AllInOne_DA[1].bin
hash: 29541b6af15c397977fb6c85df452c0add11ca18, size: 1.01 MiB
version: 3.3001.2019/06/02021/01/06 09:13:14, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM174)
Connection status: XHCI:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Requesting flash signature from server...
[SERVER] XIAOMI_FL [cereus,14fc335a8766a9d5] ref id: XF00271802089, cost: 4, your balance: 2
Sending Download Agent...
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
(device_instance.cpp, line:139)
%[
XIAOMI_FL(Bootloader Authorization(QC, MTK) - Including Identify, Flashing, SpecialTask): 4 credits
- By default, use brom version 7.1922.6.0 with MTK_AllInOne_DA[1].bin as DA for stable flashing process.
In some cases, if you got STATUS_BROM_CMD_SEND_DA_FAIL or STATUS_EXT_RAM_EXCEPTION error, please retry with MTK_AllInOne_DA[2].bin or MTK_AllInOne_DA[0].bin as DA
- Flashing default cust.img will result with an error STATUS_SEC_IMG_TYPE_MISMATCH or STATUS_SEC_IMG_TOO_LARGE, so it is skipped by default
Please download cust_global.img from https://app.nihaocloud.com/f/86a95a2769cc4d5d8d85/?dl=1 in case you need to flash cust partition
- Please turn off your "Find device" before flashing, bootloader authorization will not work when "Find device" is turned ON.
- Make sure to select the CORRECT phone model and storage type !
- Do not rename the BRAND and MODEL directory !
- Special Tasks are bonus feature, if it needs "Bootloader Authorization" and you pay for authorization not the specific task !!!
- You have to select the CORRECT firmware that match your phone model before Identify !!!
- Make sure that the phone is completely powered off before connecting to PC !
- If you want to flash factory firmware, please identify using official public firmware at first and then flash with factory firmware after identify !
%]
name: MTK_PLATFORM_CFG
version: V1.1.2
platform: MT6765
project: cereus
storage: EMMC
bootChannel: MSDC_0
blockSize: 0x00020000
MTK Preloader file info.
Found 10 supported eMMC CID:
[SK Hynix] HBG4a2 90014A48 42473461 32xxxxxx xxxxxxxx
[SK Hynix] hB8aP 90014A68 42386150 3Exxxxxx xxxxxxxx
[SK Hynix] HAG4a2 90014A48 41473461 32xxxxxx xxxxxxxx
[Micron] S0J9B7 13014E53 304A3942 37xxxxxx xxxxxxxx
[Samsung] QE63MB 15010051 4536334D 42xxxxxx xxxxxxxx
[Samsung] GD6BMB 15010047 4436424D 42xxxxxx xxxxxxxx
[Micron] S0J9A7 13014E53 304A3941 37xxxxxx xxxxxxxx
[Samsung] RH64AB 15010052 48363441 42xxxxxx xxxxxxxx
[SK Hynix] HCG8a4 90014A48 43473861 34xxxxxx xxxxxxxx
[Samsung] QD63MB 15010051 4436334D 42xxxxxx xxxxxxxx
AUTH info: MTK, version: 1
Firmware package: 2\images
BROM version[1]: 7.1922.6.0
DA: MTK_AllInOne_DA[1].bin
hash: 29541b6af15c397977fb6c85df452c0add11ca18, size: 1.01 MiB
version: 3.3001.2019/06/02021/01/06 09:13:14, start addr: 0x40000800
Connecting to BootROM...
Power off the phone, disconnect and reconnect the battery(if possible) and connect USB cable...
Hold the VOL DOWN or VOL UP + DOWN(for newer model) to force MediaTek BootROM.
Scanning BootROM or Preloader port(30 s)... Done
Detected [BootROM] MediaTek USB Port_V1632 (COM174)
Connection status: XHCI:HUB3:HUB3:USB 1.10 High-Speed
USB Driver: [MediaTek Inc.] wdm_usb, version: 3.0.1504.0, date: 1-22-2015
Connecting Bootrom...
Requesting flash signature from server...
[SERVER] XIAOMI_FL [cereus,14fc335a8766a9d5] ref id: XF00271802089, cost: 4, your balance: 2
Sending Download Agent...
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
Platform: MT6765, Hw ver: 0xCA00, Sw ver: 0x0000
Error: 0xC0010005 (STATUS_PROTOCOL_ERR)
There was a problem communicating with the device, make sure the phone is properly switched off (with the battery connected) before connecting to PC for flashing.
(device_instance.cpp, line:139)
%[
