Qcn File Backup Vit QPST
From your computer, click the Windows Start button -> All Programs -> QPST -> QPST Configuration.
Click the Ports tab, then click the Add New Port ... button.
Click COM - USB/QC Diagnostic, and then click OK.
(Note: there will be in front of COM - in our example, it was COM18 - USB/QC Diagnostic).
Click Start Clients, and then Software Download.
Click the Backup tab, then the second Browse button.
A new box will pop up, asking you where to save a file. Choose your Desktop, and name the file backupmonte
Press the Start button (next to the Abort button).
The progress bar will show the percentage of the backup process.
Wait until you see Memory Backup Completed in the Status box, as shown below.
Close all QPST programs running.
On your Desktop, look for the file backupmonte (or backupmonte.qcn).
Click the file once, and hover your mouse over it to check the size.
Make sure it is greater than 0 KB. In our example, as shown below, the file size was 153 KB.
It may be different for you, which is fine - just make sure it is greater than 0 KB.
Click the Windows Start button -> All Programs -> QPST -> QPST Configuration.
Click the Ports tab.
Click the only COM device from the list to select it.
(In our example, it was COM18, however it may have a difference number for you.)
Once you have selected it, click the Disable button - you may get a warning message; just click the Yes buton.
Please Hit On Thanks Botton
:pk:
From your computer, click the Windows Start button -> All Programs -> QPST -> QPST Configuration.
Click the Ports tab, then click the Add New Port ... button.
Click COM - USB/QC Diagnostic, and then click OK.
(Note: there will be in front of COM - in our example, it was COM18 - USB/QC Diagnostic).
Click Start Clients, and then Software Download.
Click the Backup tab, then the second Browse button.
A new box will pop up, asking you where to save a file. Choose your Desktop, and name the file backupmonte
Press the Start button (next to the Abort button).
The progress bar will show the percentage of the backup process.
Wait until you see Memory Backup Completed in the Status box, as shown below.
Close all QPST programs running.
On your Desktop, look for the file backupmonte (or backupmonte.qcn).
Click the file once, and hover your mouse over it to check the size.
Make sure it is greater than 0 KB. In our example, as shown below, the file size was 153 KB.
It may be different for you, which is fine - just make sure it is greater than 0 KB.
Click the Windows Start button -> All Programs -> QPST -> QPST Configuration.
Click the Ports tab.
Click the only COM device from the list to select it.
(In our example, it was COM18, however it may have a difference number for you.)
Once you have selected it, click the Disable button - you may get a warning message; just click the Yes buton.
Please Hit On Thanks Botton
:pk:
