0. Installing Huawei drivers (the first two of the list is enough)
1. Download and install the programDC-unlocker
2. Connect the router cable to the computer and determine it in the program DC-unlocker by clicking on the magnifying glass.
If the modem, version, IMEI, firmware and other data on the modem were determined below, and you see that the firmware is not higher than version 315 (type 21. 315 .xx.xx.xx - if 316 and higher, then the method does not fit and you need to do everything method "Needles") then below insert the command.
1:
AT^SFM=1 press Enter
If you get the answer to this command OK, then you overload the router with the command.
2:
AT^RESET
Now the record in NVRAM is unlocked, you can enter any commands.
3: After rebooting the router, we again click on the magnifying glass in the DC-unlocker program and define the router as before. And now enter at the bottom of the command to unlock
AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
in the same way should receive OK.
4. Enter the commands in turn
AT^SFM=0
And
AT^RESET
The router will reboot and it will be unlocked.
1. Download and install the programDC-unlocker
2. Connect the router cable to the computer and determine it in the program DC-unlocker by clicking on the magnifying glass.
If the modem, version, IMEI, firmware and other data on the modem were determined below, and you see that the firmware is not higher than version 315 (type 21. 315 .xx.xx.xx - if 316 and higher, then the method does not fit and you need to do everything method "Needles") then below insert the command.
1:
AT^SFM=1 press Enter
If you get the answer to this command OK, then you overload the router with the command.
2:
AT^RESET
Now the record in NVRAM is unlocked, you can enter any commands.
3: After rebooting the router, we again click on the magnifying glass in the DC-unlocker program and define the router as before. And now enter at the bottom of the command to unlock
AT^NVWREX=8268,0,12,1,0,0,0,2,0,0,0,A,0,0,0
in the same way should receive OK.
4. Enter the commands in turn
AT^SFM=0
And
AT^RESET
The router will reboot and it will be unlocked.
