Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM33)
Build ID: HUAWEICUN-U29
Build Date: Mon Aug 1 09:40:11 CST 2016
Build Date: 1470015611
Model: HUAWEI CUN-U29
Brand: HUAWEI
Region: US
Mediatek Version Release: CUN-U29C578B124
FRP partition: emmc@frp
Build ID: unknown
Brand: Huawei
Device: unknown
Manufacturer: unknown
Display ID: CUN-U29C578B124
Version: 5.1
Device: HWCUN-U6582
Manufacturer: HUAWEI
IMEI[1]: 863475034123547
IMEI[2]: 863475034179812
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing MBR
Reading: BEGIN: 0x1400000 - LEN: 0x200
Start procesing EBR1
Reading: BEGIN: 0x1480000 - LEN: 0x200
Start procesing proinfo
Reading: BEGIN: 0x1500000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 863475034123547
IMEI[2] from NVRAM: 863475034179812
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x2700000 - LEN: 0xa00000
Start procesing OEMINFO ......
Reading: BEGIN: 0x3100000 - LEN: 0x4000000
Start procesing UBOOT ......
Start processing BOOTIMG
Start processing RECOVERY
Start procesing secro
Start procesing LOGO ......
Start procesing EBR2
Reading: BEGIN: 0x8720000 - LEN: 0x200
Start procesing FRP ......
Reading: BEGIN: 0x91a0000 - LEN: 0x100000
Start procesing ROOTM ......
Reading: BEGIN: 0x92a0000 - LEN: 0x560000
Start procesing system
Reading: BEGIN: 0x9800000 - LEN: 0x93800000
Start procesing cust
Reading: BEGIN: 0x9d000000 - LEN: 0x19000000
Start procesing CACHE ......
Reading: BEGIN: 0xb6000000 - LEN: 0x9600000
Start procesing USRDATA ......
Reading: BEGIN: 0xbf600000 - LEN: 0x112100000
Saved to : C:\Users\M.TAHIR SHAN SOFTWAR\Documents\Android_MTK\firmware_backup\MT6582_S01_EMMC_unknown__Huawei_5.1_863475034123547_863475034179812_03_01_2017_08_42_39
Wait untill phone will start charging.
All done.
by TAHIR SHAN READ FIRMWARE AFTER RESET FRP
BY KING AVG
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM4)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6582_S01
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000 [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM33)
Build ID: HUAWEICUN-U29
Build Date: Mon Aug 1 09:40:11 CST 2016
Build Date: 1470015611
Model: HUAWEI CUN-U29
Brand: HUAWEI
Region: US
Mediatek Version Release: CUN-U29C578B124
FRP partition: emmc@frp
Build ID: unknown
Brand: Huawei
Device: unknown
Manufacturer: unknown
Display ID: CUN-U29C578B124
Version: 5.1
Device: HWCUN-U6582
Manufacturer: HUAWEI
IMEI[1]: 863475034123547
IMEI[2]: 863475034179812
Dumping Preloader.
Start dumping flash, this can take up to 1 hour.......
Start procesing MBR
Reading: BEGIN: 0x1400000 - LEN: 0x200
Start procesing EBR1
Reading: BEGIN: 0x1480000 - LEN: 0x200
Start procesing proinfo
Reading: BEGIN: 0x1500000 - LEN: 0x300000
Start procesing nvram
IMEI[1] from NVRAM: 863475034123547
IMEI[2] from NVRAM: 863475034179812
Start procesing PROTECT_F ......
Reading: BEGIN: 0x1d00000 - LEN: 0xa00000
Start procesing PROTECT_S ......
Reading: BEGIN: 0x2700000 - LEN: 0xa00000
Start procesing OEMINFO ......
Reading: BEGIN: 0x3100000 - LEN: 0x4000000
Start procesing UBOOT ......
Start processing BOOTIMG
Start processing RECOVERY
Start procesing secro
Start procesing LOGO ......
Start procesing EBR2
Reading: BEGIN: 0x8720000 - LEN: 0x200
Start procesing FRP ......
Reading: BEGIN: 0x91a0000 - LEN: 0x100000
Start procesing ROOTM ......
Reading: BEGIN: 0x92a0000 - LEN: 0x560000
Start procesing system
Reading: BEGIN: 0x9800000 - LEN: 0x93800000
Start procesing cust
Reading: BEGIN: 0x9d000000 - LEN: 0x19000000
Start procesing CACHE ......
Reading: BEGIN: 0xb6000000 - LEN: 0x9600000
Start procesing USRDATA ......
Reading: BEGIN: 0xbf600000 - LEN: 0x112100000
Saved to : C:\Users\M.TAHIR SHAN SOFTWAR\Documents\Android_MTK\firmware_backup\MT6582_S01_EMMC_unknown__Huawei_5.1_863475034123547_863475034179812_03_01_2017_08_42_39
Wait untill phone will start charging.
All done.
by TAHIR SHAN READ FIRMWARE AFTER RESET FRP
BY KING AVG
