Huawei JAT-L41 (Honor Play 8A) Account remove successfully done by Hydra Tool
1. Run Hydra MTK Tool
2. Choose Brand and Module
3. Go to "Service"--> "Tool"
4. Choose "Huawei"
5. Choose "Remove Account" from 'Method / OPtion" drop down menu
6. Click on "Execute"
7. Connect cellphone with computer using USB Data Cable.
8. Wait until the operation is completed.
2. Choose Brand and Module
3. Go to "Service"--> "Tool"
4. Choose "Huawei"
5. Choose "Remove Account" from 'Method / OPtion" drop down menu
6. Click on "Execute"
7. Connect cellphone with computer using USB Data Cable.
8. Wait until the operation is completed.
Screen Shorts
Logs
=====================================
Searching for MTK Device...Found
Port Identification :Flashmode BROM
FriendlyName :MediaTek USB Port_V1633 (COM5)
Device :5&2889b90e&0&3
SymbolicName :\??\USB#VID_0E8D&PID_0003#5&2889b90e&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
Driver Ver :01/22/2015,3.0.1504.0
Handshaking...Ok
Identifying Hardware ID.....
Reading Device hardware info..
hw code : 0766MT6765 [6765]
hw subcode : 8A00
hw version : CA00
sw version : 0000
Target config : E5
SB : 01 (True)
SLA : 00 (False)
DAA : 04 (True)
FUSEID : 00000000
SECURE VERSION : 05
BL VERSION : FE [SBC+SDA+SEL]
Security Authorization....
Sending[Huawei_auth_sv5_.auth] Accepted
Preparing Download Agent..
DA : Huawei__6765_8A00CA0000000000_00001000_00030000.bin
Agent: MTK_DOWNLOAD_AGENT -HYDRA
Ver : MTK_AllInOne_DA_v3.3001.2018/10/18.17:38_452898
Init : Loader [1]
Sending : Accepted
Identifying Protocol...
Protocol : New
Synchronization...[ERROR]- NOT SYNC
=============================================
Reasons why it fails due to the following"
1. Harware problem/issues
2. If you did Testpoint Kindly check the parts you Touch/TP
3. Powershortage, try to connect Battery
4. Check or replace usb cable and plug directly to your pc usb port.
=============================================
SYNC
Mode : brom
Preloader Initialization...
Parsing preloader_k62v1_64_mexico.bin
Init : Accepted
Execute Secondary Loader
Init : Loader [2]
Executing : SYNC
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 55F7B001FA9FFC634F81B7321BAEDF8B
ERAM Size : 0x0000000000080000 -512 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42018AC5DAE416C3 - GP6BMB
DA Speed : high-speed
Reading GPT-EMMC [0x00008000] 130 Items
Autobackup Partitions
-preloader[0x00000000]512 KB ->preloader.bin...Ok
-> Renaming Preloader.... preloader_k62v1_64_mexico.bin
Creating Scatter file... C:\Hydra Tool\\Backup\Auto\0766__052321142847\MT6765_Android_scatter.txt
-pgpt[0x00000000]32 KB ->pgpt.bin...Ok
-frp[0x00108000]1024 KB ->frp.bin...Ok
-nvdata[0x00A08000]16 MB ->nvdata.bin...Ok
-protect1[0x01A08000]8 MB ->protect1.bin...Ok
-protect2[0x02208000]13.969 MB ->protect2.bin...Ok
-persist[0x03800000]8 MB ->persist.bin...Ok
-nvram[0x04400000]5 MB ->nvram.bin...Ok
-oeminfo[0x04900000]32 MB ->oeminfo.bin...Ok
Done!!!
C:\Hydra Tool\\Backup\Auto\0766__052321142847
MTK Phone Loader is NOW RUNNING.
Reading Device UniqueID, RAM and Flash Chip Info...
UNIQUE ID : 55F7B001FA9FFC634F81B7321BAEDF8B
ERAM Size : 0x0000000000080000 -512 KB
IRAM Size : 0x00000000C0000000 -3 GB
eMMC BOOT1 : 0x0000000000400000 -4 MB
eMMC BOOT2 : 0x0000000000400000 -4 MB
eMMC RPMB : 0x0000000001000000 -16 MB
eMMC USER : 0x0000000E8F800000 -58.242 GB
eMMC CID : 150100475036424D42018AC5DAE416C3 - GP6BMB
Reading GPT-EMMC [0x00008000] 130 Items
-------------------------------------
Operation : Remove Account
Processing...
Backing up Partition for safety...
-oeminfo_052321142912.bin[0x04900000]32 MB ->oeminfo_052321142912.bin...Ok Ok
Rebooting Device [Reboot To Normal]
Reboot Done!!
Elapsed Time : 00:01:08
BR
Mount Everest