IF MY POST HELP YOU PLEASE GIVE A LIKE.
ONLY TEST POINT AND DONE
Welcome to Octoplus Huawei Software v.1.3.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM8 USB Serial Port
2: COM1 Puerto de comunicaciones
Job ID: 000000000190E039
2025-07-21 21:00:31
Starting Direct Unlock
Selected phone model: JKM-LX3
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: 7MLNW19411015515
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: JKM-LX3
System: JKM-LX3 9.1.0.333(C771E5R1P1)
Android Version: 9
Base Version: JKM-LGRP2-OVS 9.1.0.333
Custom Version: JKM-LX3-CUST 9.1.0.5(C771)
Preload Version: JKM-LX3-PRELOAD 9.1.0.1(C771R1)
C_Version: C771
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: JKM-LX3
System: JKM-LX3 9.1.0.333(C771E5R1P1)
MEID: 00000000000000
IMEI A: 865365040
IMEI B: 000000000000000
S/N: 7MLNW19411015515
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.3.5 Software version.
ONLY TEST POINT AND DONE
Welcome to Octoplus Huawei Software v.1.3.5
To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode
To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode
To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'
Found COM ports:
1: COM8 USB Serial Port
2: COM1 Puerto de comunicaciones
Job ID: 000000000190E039
2025-07-21 21:00:31
Starting Direct Unlock
Selected phone model: JKM-LX3
Warning: Please, make sure the phone`s battery is fully charged and connected, after connect the device via Factory Mode (use Hardware Test Point or "ON/OFF Factory Mode option").
Warning: Selected response: Proceed
Searching HUAWEI USB COM 1.0 port...
Detected HUAWEI USB COM 1.0 port
Phone connect successfully
Writing bootloader KIRIN710_V1...
Initializing remote service connection...
Downloading resource...
Writing XLOADER partition...
Writing UCE partition...
Writing FASTBOOT partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Warning: If you use modified USB cable please reconnect cable from the mother board and press "Ok" to proceed the operation
Warning: Selected response: Ok
Searching Fastboot devices...
Found android device: 7MLNW19411015515
Detected Android Sooner Single ADB Interface port
Reading basic data...
Device Model: JKM-LX3
System: JKM-LX3 9.1.0.333(C771E5R1P1)
Android Version: 9
Base Version: JKM-LGRP2-OVS 9.1.0.333
Custom Version: JKM-LX3-CUST 9.1.0.5(C771)
Preload Version: JKM-LX3-PRELOAD 9.1.0.1(C771R1)
C_Version: C771
D_Version: D000
FB Lock State: LOCKED
User Lock State: LOCKED
Downloading resource...
Connecting to the credit server...
Username: Default_user
Checking balance...
Your balance: 3 credits
Sending device information...
Sending firmware information...
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: UNLOCKED
User Lock State: LOCKED
Device Model: JKM-LX3
System: JKM-LX3 9.1.0.333(C771E5R1P1)
MEID: 00000000000000
IMEI A: 865365040
IMEI B: 000000000000000
S/N: 7MLNW19411015515
Saving backup of MODEM_SECURE...
Reading secure data...
Unlocking phone...
Rebooting device...
Direct Unlock done.
Performed by 1.3.5 Software version.