- Sep 3, 2018
- 5,077
- 4,650
- Skype
- nico_2202
Qualcomm Module - Select Brand and Model in Xboot list For to Start Job!.
These devices require the RPL package to be installed!
- This operation is completely free in DTpro tool - NO credits required.
Note : Always perform the Security Backup operation.
Connect the device to the edl mode.
Press the "Special Task" button. Select the Security Backup option.
Step #1 | Security Backup!...
Select Type ; Encripted
Check in Huawei rpl package (New) - File of your Model
Once the "rpl" file is loaded, press the Write! button.
Connect your device in Edl Mode.
Rpl package written correctly
- Please turn on your device and activate Manufacturer Mode.
Manufacturer Mode
Put phone in manufacture mode. On dialpad type *#*#2846579#*#*, select “Project Menu”, “Background settings”, “USB ports settings”, “Manufacture mode”.
Then connect it to PC and install drivers (If you do not have separate driver pack for your device, install HiSuite software).
Note : Select DBAdapter Reserved port
Press Special Task Button and Select Option IMEI repair | Input New IMEI´s and Ok!..
IMEI repair successful!
Note: We must restore the modem from the Security backup Created in step #1.
This Device [Huawei Nova 13i] requires network repair.
•This operation requires credits!
Press [YES] to continue
Connect in Edl Mode again!.. and go to the Partition Manager tab!...
Press Info | List Partition Button
Locate the Modem Partition and double-click to load the Modem.
Once the modem is loaded into the partition table, please press the Write button!
wait for the operation to complete.
These devices require the RPL package to be installed!
- This operation is completely free in DTpro tool - NO credits required.
Note : Always perform the Security Backup operation.
Connect the device to the edl mode.
Press the "Special Task" button. Select the Security Backup option.
Step #1 | Security Backup!...
Select Type ; Encripted
Check in Huawei rpl package (New) - File of your Model
Once the "rpl" file is loaded, press the Write! button.
Connect your device in Edl Mode.
Rpl package written correctly
- Please turn on your device and activate Manufacturer Mode.
Manufacturer Mode
Put phone in manufacture mode. On dialpad type *#*#2846579#*#*, select “Project Menu”, “Background settings”, “USB ports settings”, “Manufacture mode”.
Then connect it to PC and install drivers (If you do not have separate driver pack for your device, install HiSuite software).
Note : Select DBAdapter Reserved port
Press Special Task Button and Select Option IMEI repair | Input New IMEI´s and Ok!..
IMEI repair successful!
Note: We must restore the modem from the Security backup Created in step #1.
This Device [Huawei Nova 13i] requires network repair.
•This operation requires credits!
Press [YES] to continue
Connect in Edl Mode again!.. and go to the Partition Manager tab!...
Press Info | List Partition Button
Locate the Modem Partition and double-click to load the Modem.
Once the modem is loaded into the partition table, please press the Write button!
wait for the operation to complete.
