World First HUAWEI P 40 PRO ID DONE

AK Mohammad

Active Member
Apr 9, 2021
40
9
Johannesburg, South Africa
Welcome to Octoplus Huawei Software v.‪1.2.6.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000001B06A86
2021-10-19 07:44:34 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ‪ELS-NX9‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN990_5G_V2...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Writing ‪BL2‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 0123456789ABCDEF
Detected ‪Android Sooner Single ADB Interface‬ port
Connecting to the credit server...
Username: mohammadarman
Checking balance...
Your balance: 100 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Saving backup of RECOVERY_RAMDISK...
Formatting secure data...
Rebooting device...

Reset Huawei ID done.
Performed by ‪1.2.6.1‬ Software version.
 
  • Like
Reactions: Ngoclamgsm

AK Mohammad

Active Member
Apr 9, 2021
40
9
Johannesburg, South Africa
Welcome to Octoplus Huawei Software v.‪1.2.6.1‬

To enable 'Manufacture' mode dial
- for Qualcomm and Hisilicon based models: *#*#2846579#*#*
ProjectMenu > Background Settings > USB Port Settings > Manufacture Mode
- for MTK based models: *#*#14789632#*#*
ProjectMenu > Background Settings > USB Port Settings > Debug Mode

To enable 'Fastboot' mode
1. Power off the phone. Remove SD and SIM cards
2. Press 'Vol-' and insert USB cable
3. Wait until phone enters 'Fastboot' mode

To enable 'Upgrade' mode
1. Power off the phone. Remove SD and SIM cards
2. Press and hold 'Vol-' and 'Vol+' keys and insert USB cable
3. Wait until phone enters 'Upgrade mode'

Found COM ports:

Job ID: 0000000001B06A86
2021-10-19 07:44:34 GMT -------------------------------------------------
Starting Reset Huawei ID
Selected phone model: ‪ELS-NX9‬
Searching HUAWEI USB COM 1.0 port...
Detected ‪HUAWEI USB COM 1.0‬ port
Writing bootloader KIRIN990_5G_V2...
Initializing remote service connection...
Writing ‪XLOADER‬ partition...
Writing ‪UCE‬ partition...
Writing ‪FASTBOOT‬ partition...
Writing ‪BL2‬ partition...
Bootloader Update successfully
Rebooting to fastboot mode...
Searching Fastboot devices...
Found android device: 0123456789ABCDEF
Detected ‪Android Sooner Single ADB Interface‬ port
Connecting to the credit server...
Username: mohammadarman
Checking balance...
Your balance: 100 credits
Sending device information...
Sending firmware information...
To perform this operation you need to have: 0 credits.
Removing firmware protection...
Connecting to server...
Waiting for a response from the server...
FB Lock State: ‪UNLOCKED‬
User Lock State: ‪LOCKED‬
Saving backup of RECOVERY_RAMDISK...
Formatting secure data...
Rebooting device...

Reset Huawei ID done.
Performed by ‪1.2.6.1‬ Software version.
Screenshot_20211019-122927_WhatsApp.jpg
 
Top