HUAWEI P smart 2021 PPA-LX2 / Huawei Y7A PPA-LX2 Remove Huawei Account

Abdullah Ali

Moderator
Mar 30, 2020
3,442
10,436
Pakistan Gujrat
Sonork ID
0

HUAWEI P smart 2021 PPA-LX2 / Huawei Y7A PPA-LX2 Remove Huawei Account DONE With Chimera Tool

Info​

Chimera Mobile Phone Utility version: 30.00.2212 @ 2021-10-19
Printing phone history

Gathering information...
Device Model: PPA-LX2
Current software version: PPAH-L22 10.1.1.200(C185E8R3P1)
Hardware version: Ver3.0
Boot info: locked
Image check: secure image verify success
Android version: 10
Battery state: 4130mv
Key version: huawei_key_v1
Root info: SAFE
Rescue version: rescue0.7
Phone info: (bootloader) main version do not exist in oeminfo!
VendorCountry: hw/meafnaf

Base version: PPAH-LGRP2-OVS 10.1.1.200
Cust version: PPAH-L22-CUST 10.1.1.8(C185)
Preload version: PPAH-L22-PRELOAD 10.1.1.1(C185R3)
Finished at local time: [10.19.21 14:58:12]
WorkID: 154882654

Chimera Mobile Phone Utility version: 30.00.2212 @ 2021-10-19
Printing phone history

Get Info
10/19/2021
12:56
PM

Removing Huawei account
Rebooting phone to factory mode
Changing to factory mode
Rebooting phone to USB update mode

Downloading ERECOVERY files
Flashing ERECOVERY files

Failed to flash the eRecovery file, falling back to manual reboot.
Please put the phone into factory mode via Test Point!
Or do an USB firmware update with a firmware version that is equal or not much older than the one currently on the phone.
If you used Test Point to switch into factory mode, you should immediately reconnect your phone's battery as soon as the program detects the device.
If you fail to reconnect the battery, your phone might be still locked after the procedure finished

Uploading data
Servicing the phone

Please be patient, this step can be long. DO NOT DISCONNECT the phone while the procedure is running. It can damage your phone permanently.
The phone will automatically start factory reset, after that it might shut down. You need to turn on the phone afterwards.
IMPORTANT! Please do not connect your phone to the Internet (WiFi) and ensure there's no SIM-card present in the phone until you have completed the initial setup wizard!

Finished at local time: [10.19.21 15:00:34]
WorkID: 154882681
 
Top